hello guys,
i have sane kind on problem, but different to some extent, my system get hanged frequently, i formatted complete hard drive, but the problem remained same, please assist me what to do
Thanks
3  1796  Nepomuk 3,112
Recognized Expert Specialist
Do you also get this error message or is it just the "hanging" that's the problem? If it's a different problem, we'll better split this to its own thread to keep everything in order. ^^
If you have the same problem after a complete reinstall, then there might well be a hardware error. As far as I remember, such a behaviour could mean that (some of) the RAM is defect. If you have more available (or the RAM is in two blocks), try swapping it and see if the system still crashes.
Greetings,
Nepomuk
NeoPa 32,579
Recognized Expert Moderator MVP
I have split this off into its own thread as it did not belong with the other (found at Runtime error?).
if you have been doing any over clocking, voltage changing etc... make sure your bios settings are all default. A processor crash will cause the system to hang (or so I found when I under volted my laptop).
This just another thought too: check your memory. You could try changing it and seeing if the system becomes stable, or running a diagnostic tool
Sign in to post your reply or Sign up for a free account.
Similar topics | |
by: Harlan Messinger |
last post by:
A publication style guide indicates that for a table heading like the
following,
Table 3. Wheat and rye harvest in European countries in years that end in 3
or 7 or when a new prime minister takes office.
when the heading flows over more than one line, a hanging indent should be
used, such that the remainder of the heading should be left-aligned, in this
example, with "Wheat", leaving "Table 3. " standing off by itself on the
left.
|
by: Jim |
last post by:
We are experiencing a problem with component services in .Net and IIS. We
use component services to handle transactions against SQL Server. At some
point of usage, IIS will hang up and the lowest level in the stack trace is
at System.EnterpriseServices.Thunk.Proxy.CoCreateObject and also sometimes
at System.EnterpriseServices.Thunk.Proxy.RevokeObject. Each thread that
comes in after this gets stuck in the same spot and IIS is hung at that...
|
by: David C. Allen |
last post by:
I have a vb.net app that is controling excel 2000 thru the com interop
interface. I have referenced the excel 9.0 library and have cut down the
code in the problem subroutine to this:
Dim objExcelApp As New Excel.Application
objExcelApp.Quit()
objExcelApp = Nothing
The problem is excel is hanging in memory and has to be closed by the task
|
by: Dave |
last post by:
Hello,
I am trying to write an application that will talk to an SMTP server
using sockets. I can connect to the server just fine, then I can
receive the first message from the server. I can then send out a
command to the server, but after that the thing just hangs when I am
waiting for a response. I can't understand why this is happening. I am
new to this language, so this might be something obvious that I am
overlooking. Any help would...
|
by: Materialised |
last post by:
Hi All,
My program is hanging when I call a function for convert a image file to
base64.
I am wondering if I handled the call to this function within a different
thread if it would make any difference.
My function code is shown below:
Public Function ImageToString(ByVal bImage As Bitmap) As String
Try
| | |
by: andersboth |
last post by:
If i in my aspx cs file put code like this:
public delegate void TimeOutDelegate();
public void timeOut()
{
Thread.Sleep(8000);
}
private void Page_Load(object sender, System.EventArgs e)
|
by: =?iso-8859-1?q?Jean-Fran=E7ois_Michaud?= |
last post by:
Hello guys,
I was wondering if anybody here had implemented a solution where
Tables are aligned according to what the hanging indent tells us when
there is a potential for the table overflowing in the right margin or
out of the page.
I did some research a while back and came to the conclusion at that
time that it wasn't possible to have both (either we align on the
hanging indent and if there is a potential for a table to be 6.75
|
by: sonikanth |
last post by:
whenever my system on it automatically hangs. If suppose my system is on if i open my computer it will hang. I can open only DOS, but some times it is also getting some problem. Even if i refresh the system then also it is hanging..... please help me
|
by: Chrace |
last post by:
Hi all,
I have a problem with with Thread.Join( Timeout ) where the timeout never occurs.
I basically need to make a connection to an AS400 box which works fine. Once in a blue moon the AS400 gets a problem and the way this is handled on AS400 is by hanging. If I was to connect directly this would mean my main process would hang as well, so I've spawned a worker thread and used a Thread.Join( Timeout ) to make sure it always returns with...
|
by: julietmachiwa |
last post by:
I purged my database and rebuild indexes. The system has started hanging/freezing. Some Forms are not working & some select statement & Procedures are also not running. All these were OK before. On error messages are coming. What can be the cause and Solution . Using Oracle 8. Have tested with Database tools , the system hangs if you highlight some the procedures. These procedures compile well thru SQL Plus. !!Pliz help !!!!
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
