Hi,
If you use Norton Internet Security, you might be having the same problem
I'm having when developing on Visual Studio .net.
Before, when using vb6, I had only once to set a rule on the firewall to
permit VB6.exe to access the internet and I could run any project without
getting the "Program Control" pop-up window.
Now, with visual studio .net, every time I run/debug a project, that
annoying "Program Control" window pops up and I have to permit access.
Is there a way to configure the firewall to that any project running from
inside Visual Studio would automatically have granted access to the internet
like it used to be with VB6?
Thanks,
Eduardo
1  2425 
Hi Edu,
That would require by-passing the firewall. The thing is .NET apps are
compiled and not interpreted inside of the IDE when you run them, hence your
firewall saying that the application has changed each time. There are only
2 possibly ways I believe, first is to work out a way of automatically
adding the application the your firewall (programaticall y) which might even
be impossible, and the second is to disable the firewall altogether when
debugging. I know that this is irritating as I have experienced it before
also. Does Norton Anti Virus have recognized trusted applications that it
automatically allows access too? if so maybe have a hard look into how to
bodge an application into that list, which again might be impossible (I have
no idea).
Nick.
"Edu" <xp*****@comcas t.net> wrote in message
news:G1******** ************@co mcast.com... Hi,
If you use Norton Internet Security, you might be having the same problem
I'm having when developing on Visual Studio .net.
Before, when using vb6, I had only once to set a rule on the firewall to
permit VB6.exe to access the internet and I could run any project without
getting the "Program Control" pop-up window.
Now, with visual studio .net, every time I run/debug a project, that
annoying "Program Control" window pops up and I have to permit access.
Is there a way to configure the firewall to that any project running from
inside Visual Studio would automatically have granted access to the
internet like it used to be with VB6?
Thanks,
Eduardo
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Ralph |
last post by:
I used to have Visual Basic .net std. 2003 installed on WinXP SP1A. But I
found it too hard to upgrade WinXP to SP2. Now, I do have WinXP SP2
installed, but I am having problems installing Visual Basic .net standard
2003. Not installing Visual Basic at the WinXP SP1A level - was the only way
I found that I could
install WinXPSP2.
My computer was purchased with WinXP SP1 Professional. I also have
Norton Internet Security and Norton...
|
by: Al Christoph |
last post by:
I'm running VB2003 on a new Dell Laptop where Dell in its infinite wisdom put
on Norton Internet Security. UGH! Maybe I should have paid business rather
than home prices:-)
At any rate with Internet Security turned on, when I debug my console
application, VB 2003 hangs and the program never gets to the first line.
When I run the program stand alone - Norton says that the program is
attempting to connect to a DNS server. SAY WHAT?...
|
by: Sven |
last post by:
I'm certainly not the first to write about this subject, but I came
across it after buying a new PC with NIS on it and it messed up my
site without telling or yelling.
I solved it by this statement in the <head></head>
<script src=http://www.mydomain.com/norton.js></script>
and the script at http://www.mydomain.com/norton.js contains the
follwing code:
function undonorton(){
infected=false;
|
by: Bruno Jouhier [MVP] |
last post by:
I'm currently experiencing a strange phenomenon:
At my Office, Visual Studio takes a very long time to compile our solution
(more than 1 minute for the first project).
At home, Visual Studio compiles the same solution much faster (about 10
seconds for the first project).
My home computer is only marginally faster than the one I have at the office
(P4 2.53 vs. P4 2.4, same amount of RAM).
On the slow machine, the CPU usage is very low,...
|
by: Ammar |
last post by:
Hi!
I am running IIS 5 on windowsXP proffesional with norton internet security
proffesional 2004. I have been trying to make an ASP.NET page that sends a
report as an e mail to the webmaster of the site when a user subscribes in
the site. The page runs well, but the e mail is never delivered!
After long hours of search i found that turning norton Internet securty off
solves the whole probelm!
But then of course, i dont want to run my IIS...
| | |
by: Chris Zoper |
last post by:
Hello,
Norton Internet Security blocks some of my ASP.NET pages. The pages are
very 'normal' pages though. There is no 'dangerous' code in it or
something like that. Also, the page is not in a pop-up. Most of my pages
work just fine, but when I navigate to a specific page, it won't open. I
don't get an exception or a warning, the page just won't finish loading.
When I disable Norton Internet Security, it works fine again.
Also when I...
|
by: Mark Rae |
last post by:
Hi,
Is anyone else experiencing a problem with VS.NET 2003 & Norton Internet
Security 2005, specifically when debugging?
More and more often when I'm debugging an ASPX page, the code breaks on the
following JavaScript function:
function SymOnLoad()
{
|
by: Kevin L |
last post by:
I open any VB.NET project and select Run, the Build is successful, but the
IDE hangs and never actually runs the app.
This just started happening.
|
by: Innycool |
last post by:
Save 25% on Norton Internet Security
Automatic security updates
Advanced phishing detection
Two-way firewall blocks hackers
Windows security holes shielded
Public wireless network protection
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
