473,797 Members | 2,926 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

MacPython wiki "moved" to Python wiki - now it's your turn...


After much wailing and gnashing of teeth the past couple of days, I managed
to move (most of?) the content from the MacPython wiki to the main Python
wiki (*). All pages were created as subpages of

http://wiki.python.or/moin/MacPython

The motivation for this rather hasty move was that the MacPython wiki was
running an ancient version of MoinMoin and got spammed heavily. Because of
its age and vulnerability it was simply too hard to keep up with all the
wiki spammers. So I moved everything.

I did very little to try and fix up link references. Moin's subpage
references have always befuddled me, and many of the page references were
weirded out to begin with, so there you have it: royal link spaghetti.

This is where you come in. You can do any number of things to try to
identify and fix problems:

* Visit http://wiki.python.org/moin/OrphanedPages and see if there are
any MacPython/... pages which are orphaned (hint: there are quite a
few). Then see if you can find an incorrect link which should refer
to the orphaned page.

* Visit the MacPython pages. Just do a title search for "MacPython" to
locate them. Visit and clean up as appropriate.

* Everything got pushed down, even home pages. One of three things can
reasonably be done:
1. Move a home page up if there isn't one at the top level.
2. Replace an uplevel home page with the MacPython version if the
latter is "better".
3. Merge the content from the MacPython version into the uplevel home
page.
Instead of performing #2 and #3 yourself, you might send an email to
the person and ask them to do the merge/replace. In any case, this
operation is likely to require some link fiddling.

* There may also be non-homepage pages at the top level which should be
merged with or replaced by (or replace) the MacPython version.
VisualPython comes to mind. Use your judgement

* There are lots of unprotected path references in the content,
e.g. /System/Library sitting there looking like a link when it should
probably be {{{/System/Library}}}.

* There may still be a bit of spam lurking in the pages. I tried to
eliminate all the crap, but I might have missed some.

* Many pages could use Category references. There are lots of pages
referring to scripting specific Mac applications, home pages and many
code samples. Adding CategoryMac or CategoryAppScri pt might be
reasonable as well.

* Use your WikiImagination . There are probably lots of other things
that can be done. I think the MacPython wiki had fallen into a bit of
disrepair, even if you ignore the spam problem, so a little general
TLC would probably help.

Skip

(*) Thank goodness for Emacs and Mozex...
Feb 13 '07 #1
0 1259

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

2
4597
by: Brent | last post by:
Hi, I have a C# asp.net app that sent mail fine on server 2000 or win 2000, but now I moved it to our new 2003 box, and it's giving me "The 'SendUsing' configuration is invalid" This is the code now... MailMessage mail = new MailMessage(); mail.From = from;
0
1072
by: Rick Curry | last post by:
We have made changes to an ASP.Net app, tested it on our testing platform and moved it to our production platform. In testing it on the other machine, the app fails when we pull session data back from a SQL Server table keyed on the SessionID. We added loggin statements to the code to see what was going on and found that after reading a table for information to fill a listbox, having the user select one of those items which causes another...
0
1001
by: Toeknee | last post by:
We recently converted from asp to asp.net. We started getting this message - it has to do with response.redirect. Does anyone know how to fix this issue. I've checked and tried suggestions thru the internet and MS - still an issue. Thanks.
3
1446
by: Libra Blue | last post by:
I try to set the page title dynamically in an aspx page, but sometimes an error occurs due to VS removing the runat="server" attribute at its own will... How do I stop from doing so?? Libra Blue
5
2033
by: Alan Silver | last post by:
Hello, I have a page that is supposed to do some checking, and if OK, set a session variable before redirecting to another page. The following code is a simplified version, I have hard-coded the basket ID and removed a load of extra checking... public partial class GoToCheckout : Page { public void Page_Load(Object o, EventArgs e) { try {
1
2002
by: Tom | last post by:
After completing my app, I moved it to the production server. It ran ok for two days on the production server. Then, I made a change to the login process, which forced a dynamic compile(I do not pre-compile). At first, I would get the error only on the page I changed but within a couple hours, now I get the error on any page. IIS lockup is not installed.
0
1588
by: George | last post by:
my web service works fine on my laptop but when i moved it to the server i get "Server Application Unavailable." i checked the event application log and it shows "aspnet_wp.exe could not be launched because the username and/or password supplied in the processModel section of the config file are invalid". i checked the line in the machine.config in ..\framework\v2.0.50727\CONFIG and the processModel line didnt have a username/password....
3
3904
by: Keith G Hicks | last post by:
I created a dll for com (in vb.net 2005) so that I could access it's functions from an ms access app. I created the tlb file successfully. On my dev machine I referenced it in my access app and wrote the code that uses one of the functions. Everything ran just fine. No hiccups. The code performed the calculation as expected. Today I went to install this on a client workstation. I copied the tlb file into the same folder that the access adp...
0
9685
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
10468
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
10245
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
10205
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
10021
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
0
9063
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...
0
5458
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
2
3748
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
2933
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.