I need to install (for a developer associate. I am NOT a developer)VB.NE T
versions 6 & 7 on two dissimilar hardware platforms, both running Windows XP
Professional with Service Pack 2. Both are Dell platforms. One is a laptop.
One is a tower.
1. Does the "default" install suffice in most cases?
2. Are there any caveats or pitfalls to watch out for?
3. What factors affect the performance of both versions cohabiting with the
SAME operating system on two different platforms.
4. Is it necessary to disable Antivirus software or other TSR's to do the
install gracefully?
5. Any other wisdom would be greatly appreciated.
3  2273 
There is no VB.NET 6. Only VB6, which has nothing to do with VB.NET. There
is also two version of VB.NET: 2002 and 2003 (MS call them internally VB7.0
and VB7.1, which makes lot of VB5/6 develpers angry). Having that said,
though, you can install VB6, VB.NET2002 and VB.NET2003 all in a single box.
The operating system should be Win2K or later for VB.NET. Since you are
setting it on different computer, I do not see any problem, except it takes
quite long to install VS.NET if the computer is slower than 1Ghz on CPU.
"Gary B. Levy" <Gary B. Le**@discussion s.microsoft.com> wrote in message
news:53******** *************** ***********@mic rosoft.com... I need to install (for a developer associate. I am NOT a developer)VB.NE T
versions 6 & 7 on two dissimilar hardware platforms, both running Windows
XP Professional with Service Pack 2. Both are Dell platforms. One is a
laptop. One is a tower.
1. Does the "default" install suffice in most cases?
2. Are there any caveats or pitfalls to watch out for?
3. What factors affect the performance of both versions cohabiting with
the SAME operating system on two different platforms.
4. Is it necessary to disable Antivirus software or other TSR's to do the
install gracefully?
5. Any other wisdom would be greatly appreciated.
Hi,
When installing VS.net on my laptop, I am geting error on CD #3
"Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory".
I disables all services.. Only 3 were left windows installer, DCOM/RPC
services aling with Windows Installer....
This si my home laptop.. There are 2 users..Both have administrator
privileges...
Please HELP....
Rama
Below is the error log:
[01/22/05,23:11:41] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:11:42] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:19:26] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:19:28] Visual Studio .NET Enterprise Architect - English:
[2] ACTION FAILURE: Action ended 23:19:28: InstallFinalize . Return
value 3. See MSI log for details.
[01/22/05,23:22:35] Visual Studio .NET Enterprise Architect - English:
[2] ACTION FAILURE: Action ended 23:22:35: INSTALL. Return value 3. See
MSI log for details.
[01/22/05,23:22:38] setup.exe: [2] ISetupComponent ::Pre/Post/Install()
failed in ISetupManager:: InstallManagerH elper()
[01/22/05,23:22:38] setup.exe: [2] Component error string not specified
in ISetupManager:: AddToActionResu ltCollection()
Regarding instalattion of VS.NET, it is very sensitive. I had problem to
install it on my box. The installing process always stopped at different
stages, reporting either cannot read something and cannot write something.
And later I read a post on the net somewhere, saying not only anti-virus
process may hind VS.NET's installation, but also does spyware. I realized my
box was not cleaned enough (place Win2K on for more than 3 years and
installed/uninstalled so many different programs, downloaded lot of garbage,
got lot of popups...). So I decided reformat the disk and do a clean
installation. Then, VS.NET installation went smoothly without any problem.
Hopefully, this is the last option you'd like to try.
<rs*****@gmail. com> wrote in message
news:11******** **************@ z14g2000cwz.goo glegroups.com.. . Hi,
When installing VS.net on my laptop, I am geting error on CD #3
"Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory".
I disables all services.. Only 3 were left windows installer, DCOM/RPC
services aling with Windows Installer....
This si my home laptop.. There are 2 users..Both have administrator
privileges...
Please HELP....
Rama
Below is the error log:
[01/22/05,23:11:41] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:11:42] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:19:26] Visual Studio .NET Enterprise Architect - English:
[2] ERROR: Error 1310.Error writing to file:
Microsoft.Visua lStudio.VCProje ct.dll. Verify that you have access to
that directory.
[01/22/05,23:19:28] Visual Studio .NET Enterprise Architect - English:
[2] ACTION FAILURE: Action ended 23:19:28: InstallFinalize . Return
value 3. See MSI log for details.
[01/22/05,23:22:35] Visual Studio .NET Enterprise Architect - English:
[2] ACTION FAILURE: Action ended 23:22:35: INSTALL. Return value 3. See
MSI log for details.
[01/22/05,23:22:38] setup.exe: [2] ISetupComponent ::Pre/Post/Install()
failed in ISetupManager:: InstallManagerH elper()
[01/22/05,23:22:38] setup.exe: [2] Component error string not specified
in ISetupManager:: AddToActionResu ltCollection() This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Nanoscalesoft |
last post by:
hello all,
I am planning to start coding a nanoscale design software in
python with QT interface.I have to do this in windows or linux.Intially
windows would be fine.
I have struggled almost full day today trying to make
from import qt *
execute...........................I have the basic python core. I went
through the sites like riverbankcomputing and trolltech and few online
pages and books which talk about PyQT but never say about...
|
by: Roger Stenson |
last post by:
Hi all
I am building a new setup on an XPPro Laptop running SP2.
Having installed VB6 and am now installing .Dot Net 2003. The installation
completes the installation of the prerequisites. I have tried it with the
..Dot Net Framework 1.1 from Windows Update and on the .DotNet Framework on
the installation CD.
When installing the system it always fails on Error 25003 when the system is
'Creating the VS Dev Group.
At the end of the run...
|
by: InBiz_Dev |
last post by:
I am new to .NET developmet so please excuse any stupid questions.
I am trying to develop a web application that will include data forms and
crystal reports. Our infrastructure is such that within our domain we have
SQL Server on one server (Windows Server 2003), IIS on a seperate server
(2003 Webserver), the primary domain controller is currently a Windows 2000
SBS, I am using XP.
My question is this, is there a specific way that the...
|
by: Eric Fortin |
last post by:
I'm trying to create a classlibrary in VB.net and call it from VB6.
I can't figure it out.
I created a .net project
Created a proc DoSomething
Sub DoSOmething()
msgbox ("You did something")
|
by: Robert |
last post by:
Hello,
I'm using Pythonwin and py2.3 (py2.4). I did not come clear with this:
I want to use win32-fuctions like win32ui.MessageBox,
listctrl.InsertItem ..... to get unicode strings on the screen - best
results according to the platform/language settings (mainly XP Home,
W2K, ...).
Also unicode strings should be displayed as nice as possible at the
console with normal print-s to stdout (on varying platforms, different
| | |
by: scottgamble |
last post by:
My company is making the switch to DB2 from Oracle. I have been working
with Oracle for the last 10 years or so and still very very new to DB2.
One question that has come up recently within our team is the location
of the software. It appears that at a minimum there has to be a link to
/usr/opt/something (Off the top of my head I do not recall the exact
directory).
Using db2_install it appears (from the doc) that you can specify an...
|
by: YellowFin Announcements |
last post by:
Introduction
Usability and relevance have been identified as the major factors
preventing mass adoption of
Business Intelligence applications. What we have today are traditional
BI tools that don't work
nearly as well as they should, even for analysts and power users. The
reason they haven't
reached the masses is because most of the tools are so difficult to use
and reveal so little
|
by: bray |
last post by:
I'm using Windows Server 2000 with Apache with a secondary hard drive
which will contain the http information. Does php have to be installed
in the http drive or the root windows directory?
|
by: Mark B |
last post by:
Hi experts,
I'm converting a homebrew AD management progam I wrote, from VB6 to VB 2008.
I've got some code that sticks values in to Active Directory like this:-
objOU.PutEx ADS_PROPERTY_APPEND, "wbempath, Array(Product & "|" and Key)
Basically, a convenient place for me to store and manage CD installation
keys.
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
