I have a client for whom I have developed several ASP.NET applications and
web services.
They recently upgraded their web servers to very large (>2TB) storage
capacities.
*UPDATED INFO*
I tried installing the applications on an array of approximately 1TB in
size, and the setup fails with disk-size errors there as well
*UPDATED INFO*
Now, the setup.exe packages created by my ASP.NET deployment projects will
no longer install -- as they report that there is insufficient disk space
available for the installation.
The client is not enthused about this.
As a short-term solution, I have installed the code using good-old Xcopy and
it works that way, of course, but the client want their "Add/Remove
Programs" interface capability back.
What is the solution?
Art Hofelman
President,
ATB Consulting, Inc.
ahofelman at atbinc (no spam please) dot com 2 1561
On Sun, 22 Feb 2004 10:42:59 -0600, afh3 wrote: I have a client for whom I have developed several ASP.NET applications and web services.
They recently upgraded their web servers to very large (>2TB) storage capacities.
*UPDATED INFO* I tried installing the applications on an array of approximately 1TB in size, and the setup fails with disk-size errors there as well *UPDATED INFO*
Now, the setup.exe packages created by my ASP.NET deployment projects will no longer install -- as they report that there is insufficient disk space available for the installation.
The client is not enthused about this.
As a short-term solution, I have installed the code using good-old Xcopy and it works that way, of course, but the client want their "Add/Remove Programs" interface capability back.
What is the solution?
my bet is that the setup engine you are using is borking with an overflow.
to confirm this try installing it onto a drive that is substansually
smaller - if the setup engine has no issues then you may have nailed the
problem.
i may be wayy off track but i thaught i wold give it a go - good luck
--
---------------------------------------------------------
Steven H - B.I.T. Otago Polytechnic, Dunedin, New Zealand
..net Geek
Yes, I realize that the setup.exe is having a problem with the large
drives -- and yes it works fine with smaller drive partitions. It is only
after the large drive upgrades that the installation problems occur.
Unfortunately none of these facts make the client any happier, or the
process any less broken.
-afh
"Steven H" <sm***********@ bigfoot.com - wont work anyway ;)> wrote in
message news:zy******** *************** *****@40tude.ne t... On Sun, 22 Feb 2004 10:42:59 -0600, afh3 wrote:
I have a client for whom I have developed several ASP.NET applications
and web services.
They recently upgraded their web servers to very large (>2TB) storage capacities.
*UPDATED INFO* I tried installing the applications on an array of approximately 1TB in size, and the setup fails with disk-size errors there as well *UPDATED INFO*
Now, the setup.exe packages created by my ASP.NET deployment projects
will no longer install -- as they report that there is insufficient disk
space available for the installation.
The client is not enthused about this.
As a short-term solution, I have installed the code using good-old Xcopy
and it works that way, of course, but the client want their "Add/Remove Programs" interface capability back.
What is the solution?
my bet is that the setup engine you are using is borking with an overflow.
to confirm this try installing it onto a drive that is substansually smaller - if the setup engine has no issues then you may have nailed the problem.
i may be wayy off track but i thaught i wold give it a go - good luck
-- --------------------------------------------------------- Steven H - B.I.T. Otago Polytechnic, Dunedin, New Zealand .net Geek This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: afh3 |
last post by:
I have a client for whom I have developed several ASP.NET applications and
web services.
They recently upgraded their web servers to very large (>2TB) storage
capacities.
Now, the setup.exe packages created by my ASP.NET deployment projects will
no longer install -- as they report that there is insufficient disk space
available for the installation.
|
by: afh3 |
last post by:
ASP.NET deployement project setup.exe files "see" large drive partitions as
negative size -- and therefore will not install on them.
This is bad.
Having to teach my clients how to install using xcopy is bad.
Not having an easily removable entry in 'Add/Remove' programs is bad.
Any clues on when this will be fixed?
|
by: afh3 |
last post by:
Create a setup.exe deployment package and try to execute it on a server with
2TB of disk space. The installer will report that the drive is negative in
size, and will therefore refuse to install.
My client (who is trying to install the .NET webservices and ASP.NET apps I
created for them) with the nifty new large disk partion is not the
happiest...
When will this likely be fixed?
|
by: Rolf Schroedter |
last post by:
(Sorry for cross-posting).
I need to access large files > 2GByte (Linux, WinXP/NTFS)
using the standard C-library calls.
Till today I thought I know how to do it, namely for
Win32:
Use open(), read(), _itelli64(), _lseeki64() with type __int64
Linux/Cygwin:
#define _FILE_OFFSET_BITS 64
Use open(), read(), lseek() with type off_t
|
by: Sunny |
last post by:
Hi
I have a Database Application that i am trying to install on the Clients machine, the application uses three custom Ms access Databases. Those database i added in the correct folder in the SETUP Project of my application
However, perhaps due to the size of the Databases (appx 500 mb), or some other reason when i try to build the SETUP project, it fails, right in the start giving an ERROR, not enough DISK SPACE to complete this operation.
I...
| |
by: Richard Lewis Haggard |
last post by:
I'm new to C# deployment project way of doing things and have run into a
problem with a deployment project that has me stumped. I've put together a
deployment of a project which works just fine for new installations but
fails if the project has already been deployed. What I'd like for it to do
is to ask if it should upgrade/repair/uninstall. Instead, it says that the
user must remove the project before the installation can execute. What...
|
by: afh3 |
last post by:
I have a client for whom I have developed several ASP.NET applications and
web services.
They recently upgraded their web servers to very large (>2TB) storage
capacities.
*UPDATED INFO*
I tried installing the applications on an array of approximately 1TB in
size, and the setup fails with disk-size errors there as well
*UPDATED INFO*
|
by: mike |
last post by:
I help manage a large web site, one that has over
600 html pages... It's a reference site for ham radio
folks and as an example, one page indexes over
1.8 gb of on-line PDF documents.
The site is structured as an upside-down tree, and
(if I remember correctly) never more than 4 levels.
The site basically grew (like the creeping black blob) ...
all the pages were created in Notepad over the last
|
by: =?Utf-8?B?VCFN?= |
last post by:
Hi All,
I've been successfully deploying clickOnce successfully through the 2.0 and
3.X frameworks, but now have a problem with ClickOnce updates in 3.5 SP1.
The scenario is this: I want to deploy an *offline* application that can
only be installed from behind our organizational firewall (a Win2k3 domain),
but can be updated from anywhere (hotels, etc).
To do this, the publishing folder location is set to a UNC share path:
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |