"Cowboy (Gregory A. Beamer) - MVP" <No************ @comcast.netNoS pamMwrote
in message news:94******** *************** ***********@mic rosoft.com...
The most likely reason, if it is all directories, is the network admin
turned
off anonymous access on the sites in IIS. If so, tell him to turn them
back
on, unless your sites are using Windows Authentication only (ie, these are
Intranet applications that serve based on users domain credentials). As
you
are getting errors on IUSR and IWAM, you probably have forms auth, which
locks things down.
He could have also whacked the IUSR and IWAM accounts by removing from
groups or resetting policy. If so, you really need the network admin to
pull
his head out. Worst case is reinstalling IIS and then spanking an admin.
:-)
I would not think someobody would do this, but security changes are often
knee jerk reactions, so this is not impossible.
The other option is to check the ACLs (Access Control lists) on the web
folders (where your virtual directories are pointed to). Most likely he
increased access security on the web folders, or worse, on the entire
drive
(which would cascade down). I would put it back on his plate, as he was
the
one who did it, but say to him, "did you clamp down on the ACLs on web
directories?" He will either think you have gotten smarter (rare in most
network admins, who think developers are stupid, but worth a shot). :-)
There may be some IWAM and IUSR perms that were whacked even beyond this,
but this is the norm.
If I think of something else, I will post.
--
Gregory A. Beamer
MVP; MCP: +I, SE, SD, DBA
Hi Gregory,
Thank you for getting back to me.
As far as the IIS stuff goes, we administer that ourselves and all the
sites, except one, are set to anonymous access under IUSR_machine_na me.
Being web servers, these have always been pretty much our department's
servers and we have a lot of autonomy in running them, at least as far as
the web and IIS is concerned. The problem is that they have to fit in the
greater organisation and ultimate control still lies with the domain admins.
Last week they were no longer to tolerate that many people were
administering the organisation's servers with passwords discovered by word
of mouth and that's when the big clamp down started. For our servers, most
of the developers remain listed as admininistrator s, but an awful lot of
settings have been changed (users consolidated into groups, etc; the sort of
thing that would have probably be seen as sensible anyway). Just like you
alluded to, I am suspicious that somebody has made a change to one of the
..NET or IIS specific accounts somewhere along the line, and this has
cascaded down with the aforementioned result.
Of course, getting anyone to admit to this, is going to be impossible, as is
getting these people to lose any sleep over the problems of one web server,
or spend any time trying to fix it.
Suffice to say, I believe I have managed to fix the problem for most of the
sites by using filemon (sysinternals)- and for anyone else who goes down
this route in future, you need to give the LOCAL SERVICE and NETWORK SERVICE
read and execute access to the .net Framework version 2xx directory (just
called SERVICE and NETWORK in IIS 5).
I'm not very happy about it, since I can't be sure that something untoward
will not happen in the future.
Unfortunately this hasn't managed to fix SQL CE application for PDAs (we
make use of sscesa20.dll)
Again, it still only seems to work if IWAM and IUSR are in the
administrators group.
The application event log is throwing up the following COM+ errors for each
hit...
-------------------
COM+ Services was unable to initialize due to a failure in the system API
shown below. This is often caused by a shortage of system resources on the
local machine.
CryptAcquireCon text
Process Name: dllhost.exe
The serious nature of this error has caused the process to terminate.
Error Code = 0x80090017 : Provider type not defined.
COM+ Services Internals Information:
File: .\security.cpp, Line: 643
---------------------
and ...
---------------------
The run-time environment has detected an inconsistency in its internal
state. Please contact Microsoft Product Support Services to report this
error. *** Error in __FILE__(926): Application image dump failed.
--------------------
Again, it still only seems to work if IWAM and IUSR are in the
administrators group. There is no "Acces Denied" entry in filemon, but
regmon captures the following ACCESS DENIED ocurrences for each hit
3.75126624 svchost.exe:484 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\ProfileList ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75139499 svchost.exe:484 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\ProfileList ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75170779 svchost.exe:484 OpenKey
HKLM\System\Cur rentControlSet\ Control\Session Manager\Environ ment ACCESS
DENIED Access: 0x1 SERVERNAME\IWAM _SERVERNAME
3.75210238 svchost.exe:484 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\ProfileList ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75222063 svchost.exe:484 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\ProfileList ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75247455 svchost.exe:484 OpenKey
HKLM\Software\M icrosoft\Window s\CurrentVersio n ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75575757 DLLHOST.EXE:138 4 OpenKey
HKLM\System\Cur rentControlSet\ Control\Session Manager ACCESS DENIED Access:
0x1 SERVERNAME\IWAM _SERVERNAME
3.75593042 DLLHOST.EXE:138 4 OpenKey HKLM\SOFTWARE\M icrosoft\Window s
NT\CurrentVersi on\Winlogon ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75694871 DLLHOST.EXE:138 4 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\Windows ACCESS DENIED Access: 0x20019
SERVERNAME\IWAM _SERVERNAME
3.75745630 DLLHOST.EXE:138 4 OpenKey
HKLM\System\Cur rentControlSet\ Control\Session Manager ACCESS DENIED Access:
0x1 SERVERNAME\IWAM _SERVERNAME
3.75759840 DLLHOST.EXE:138 4 OpenKey HKLM\SOFTWARE\M icrosoft\OLE ACCESS
DENIED Access: 0x20019 SERVERNAME\IWAM _SERVERNAME
3.75769639 DLLHOST.EXE:138 4 OpenKey HKLM\SOFTWARE\M icrosoft\OLE ACCESS
DENIED Access: 0x20019 SERVERNAME\IWAM _SERVERNAME
3.75792313 DLLHOST.EXE:138 4 CreateKey
HKLM\SOFTWARE\M icrosoft\Crypto graphy\RNG ACCESS DENIED Access: 0x1
SERVERNAME\IWAM _SERVERNAME
3.75809455 DLLHOST.EXE:138 4 CreateKey HKLM\SOFTWARE\M icrosoft\Crypto graphy
ACCESS DENIED Access: 0x2000000 SERVERNAME\IWAM _SERVERNAME
3.75818276 DLLHOST.EXE:138 4 CreateKey HKLM\SOFTWARE\M icrosoft\Crypto graphy
ACCESS DENIED Access: 0x1 SERVERNAME\IWAM _SERVERNAME
3.75857568 DLLHOST.EXE:138 4 OpenKey
HKLM\SYSTEM\Cur rentControlSet\ Control\Session Manager ACCESS DENIED Access:
0x20019 SERVERNAME\IWAM _SERVERNAME
3.76413941 DLLHOST.EXE:138 4 OpenKey HKLM\Software\M icrosoft\Rpc ACCESS
DENIED Access: 0x20019 SERVERNAME\IWAM _SERVERNAME
3.77733541 DLLHOST.EXE:138 4 OpenKey HKLM\System\Set up ACCESS DENIED Access:
0x20019 SERVERNAME\IWAM _SERVERNAME
3.77782750 DLLHOST.EXE:138 4 OpenKey
HKLM\System\Cur rentControlSet\ Services\DnsCac he\Parameters ACCESS DENIED
Access: 0x1 SERVERNAME\IWAM _SERVERNAME
3.78018665 DLLHOST.EXE:138 4 OpenKey HKU\.Default ACCESS DENIED Access:
0x20019 SERVERNAME\IWAM _SERVERNAME
3.78030825 DLLHOST.EXE:138 4 OpenKey HKLM\Software\M icrosoft\Window s
NT\CurrentVersi on\winlogon ACCESS DENIED Access: 0x2000000
SERVERNAME\IWAM _SERVERNAME
3.78483319 DLLHOST.EXE:138 4 OpenKey HKU\.Default ACCESS DENIED Access:
0x20019 SERVERNAME\IWAM _SERVERNAME
3.78494167 DLLHOST.EXE:138 4 OpenKey
HKLM\SOFTWARE\M icrosoft\Crypto graphy\Defaults \Provider Types\Type 001 ACCESS
DENIED Access: 0x20019 SERVERNAME\IWAM _SERVERNAME
I'm not really sure what any of that means, or how to go about fixing it.
--
Simon
