473,508 Members | 2,382 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Modem



Hi all,
This is not really a VB question, however, i am stuck a modem problem

The modem is connected to a cristie teleport with a speed of 9600 bps.

How can i set the modems DTE speed at fixed to 9600 bps ?

sometimes, the modem has a different DTE speed, i have to disconnect the
modem and connect it to a PC so it "learns" the 9600 bps speed.

I have try'd s23, s37, etc.
Hopefully somebodey has an answer.
Best Regards, Kees
Jul 17 '05 #1
1 3216

"Kees Bakelaar" <kb*******@nimava.nl> wrote in message
news:41******@inaja.bit.nl...


Hi all,
This is not really a VB question, however, i am stuck a modem problem

The modem is connected to a cristie teleport with a speed of 9600 bps.

How can i set the modems DTE speed at fixed to 9600 bps ?

sometimes, the modem has a different DTE speed, i have to disconnect the
modem and connect it to a PC so it "learns" the 9600 bps speed.

I have try'd s23, s37, etc.
Hopefully somebodey has an answer.
Best Regards, Kees

MSComm1.CommPort = 1 'if COM 1
' 9600 baud, no parity, 8 data, and 1 stop bit.
MSComm1.Settings = "9600,N,8,1"
' Tell the control to read entire buffer when Input is used.
MSComm1.InputLen = 0
' Open the port.
MSComm1.PortOpen = True
' Send the attention command to the modem.
MSComm1.Output = "ATV1Q0" & Chr$(13)

I know it wasn't a VB question but I can only provide a VB solution
Jul 17 '05 #2

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

1
10381
by: Ashish | last post by:
I wanted to make a Java application which would dial a telephone number using the modem. When the person on the other end lifts up the telephone (answers the phone), the application should start...
1
6543
by: Ashish | last post by:
Hi, I was trying to make a out going call through the voice modem, play a audio file and disconnect. With the XTAPI implementation of the JTAPI I am able to do it with an analog phone line. The...
2
2588
by: Etienne Labuschagne | last post by:
Assuming the modem is on COM5: m = open('COM5','wb+') m.write('+++\r\n') m.flush() m.write('ATQ0V1E0\r\n') m.flush() m.write('ATDT5551234;\r\n') m.flush() response = m.read()
5
3447
by: Cc | last post by:
hi, I making a program to control modem , I had follow example from MS website on how to access serial port but still don't know how to make modem dial . Is there any example on how I could make...
17
3335
by: Franc Zabkar | last post by:
My D-Link DSL-302G modem/router has a real-time clock whose settings are volatile. To avoid hand keying the date/time via the modem's JS interface, I wonder if there is a way to copy the JS code to...
0
2003
by: bishnu12 | last post by:
Hi all, There are two questions 1. I am trying to write a programme which can query to a modem get the modem details. i am using normal send() and recv() functions. But when i try to fetch a...
3
6435
by: Nutshell | last post by:
Hello everybody, in my application I'd need to know if a com port is a modem or not (and eventually its description and if it is a null modem). I get the list of com ports available with: string...
2
2380
by: muruganyuva | last post by:
hi, in my project i'm sending the data from source to destination with the help of modem. one modem at the source and other at the destination. at first i'm initializing the source modem. ...
0
1578
by: coaxfiber | last post by:
Hello, I have problem using dial-up connection with Fedora. My modem is not detected by the system.I have tried to install some drivers (*.tar) but didn't work.I'm not sure if this modem is not...
0
7223
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However,...
0
7115
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can...
0
7321
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers,...
1
7036
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows...
0
5624
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing,...
1
5047
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new...
0
1547
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated ...
1
762
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
0
414
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.