Hi everyone
I'm trying to understand what property or method raises the drawitem event
of a statusbar control. I've been struggling to draw a progressbar, but i
can't make it work.
Thank u all 6 1631
Panos wrote: Hi everyone
I'm trying to understand what property or method raises the drawitem event of a statusbar control. I've been struggling to draw a progressbar, but i can't make it work.
Thank u all
you have to change the drawmode to userdrawn
Chris
That was the first thing i did. I understand the concept of owner drawn
controls, like listboxes or combos. But in my case, i have a For i=... Next
loop and i want to pass the i index to a property (or to a method) in order
to use the graphics class and fill the bar. How can i do it?
"I Don't Like Spam" wrote: Panos wrote: Hi everyone
I'm trying to understand what property or method raises the drawitem event of a statusbar control. I've been struggling to draw a progressbar, but i can't make it work.
Thank u all
you have to change the drawmode to userdrawn
Chris
Panos wrote: That was the first thing i did. I understand the concept of owner drawn controls, like listboxes or combos. But in my case, i have a For i=... Next loop and i want to pass the i index to a property (or to a method) in order to use the graphics class and fill the bar. How can i do it?
"I Don't Like Spam" wrote:
Panos wrote:
Hi everyone
I'm trying to understand what property or method raises the drawitem event of a statusbar control. I've been struggling to draw a progressbar, but i can't make it work.
Thank u all
you have to change the drawmode to userdrawn
Chris
Are you trying to get the graphics object for a particular panel? Is
that your question?
Chris
No.
I want to know what property or method raises the drawitem event in a
statusbar.
"I Don't Like Spam" wrote: Panos wrote: That was the first thing i did. I understand the concept of owner drawn controls, like listboxes or combos. But in my case, i have a For i=... Next loop and i want to pass the i index to a property (or to a method) in order to use the graphics class and fill the bar. How can i do it?
"I Don't Like Spam" wrote:
Panos wrote:
Hi everyone
I'm trying to understand what property or method raises the drawitem event of a statusbar control. I've been struggling to draw a progressbar, but i can't make it work.
Thank u all
you have to change the drawmode to userdrawn
Chris
Are you trying to get the graphics object for a particular panel? Is that your question?
Chris
"Panos" <Pa***@discussi ons.microsoft.c om> schrieb No.
I want to know what property or method raises the drawitem event in a statusbar.
Set a breakpoint in the event handler and have a look at the callstack.
Probably it's in the statusbar's OnPaint method.
Armin
I'll check it out.Thank u Armin.
"Armin Zingler" wrote: "Panos" <Pa***@discussi ons.microsoft.c om> schrieb No.
I want to know what property or method raises the drawitem event in a statusbar. Set a breakpoint in the event handler and have a look at the callstack. Probably it's in the statusbar's OnPaint method.
Armin
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: pothik05 |
last post by:
I can not make the DrawItem event to work on the CheckedListBox control. I
suggestion will be highly appreciated.
I have the following code. The code works for ListBox and the second item
(Two) is displayed in red in the ListBox but the CheckedLIstBox displays
everything in black (where it should be displayed as red).
Public Sub New()
MyBase.New()
|
by: Jim H |
last post by:
I'm trying to use an owner draw ListBox by subscribing to the DrawItem event
to draw my custom control as an item in the ListBox. This event is
triggered when I drag the scroll button but NOT when I click the up/down
arrows on the scroll bar of the ListBox. How do I handle the user clicking
the up/down arrows?
Anybody have any ideas?
Jim
|
by: orekinbck |
last post by:
Hi There
I have wired up an event handler to a combo boxes DrawItem event, and I
want to draw a string that is vertically centered in the combo box.
At the moment I am doing it like this:
int centeredY = e.Bounds.Y + (int)((e.Bounds.Height -
mf.GetHeight(e.Graphics))/2);
|
by: e |
last post by:
I have an ownerdrawn listbox that paints items in various colors dependant
upon whether or not it has focus, selected, etc. The code that physically
paints the items is in the drawItem event, and it works... the items change
colors accordingly and the end result is what I expected to get. But it
feels sluggish, like it's painting redundant info or too many times, or
something.
So I carefully debugged the drawitem event and discovered...
|
by: Paul_Madden via DotNetMonster.com |
last post by:
I am handling the Listbox DrawItem event to enable the listbox strings to be
displayed in different colours for easy reading.
Have set ScrollAlwaysVisible and HorizontalScrollbar to true.
I Anchor the listbox T, L, R, B on the parent form
The string items held within the listbox are quite big, much longer than
could be displayed within the Listbox display area.
| |
by: Paul_Madden via DotNetMonster.com |
last post by:
I am handling the Listbox DrawItem event to enable the listbox strings to be
displayed in different colours for easy reading.
Have set ScrollAlwaysVisible and HorizontalScrollbar to true.
I Anchor the listbox T, L, R, B on the parent form
The string items held within the listbox are quite big, much longer than
could be displayed within the Listbox display area.
|
by: Smokey Grindle |
last post by:
This is just a wierd one... I am trying to draw the sub items in the
drawitem event of the list view in owner drawn mode (because of documented
W32 rendering bugs) instead of in two seperate items drawitem and
drawsubitems... but when I run this code in the drawitems
For Each subItm As ListViewItem.ListViewSubItem In _tn.SubItems
' If subItm..ColumnIndex <0 Then
'If (e.State And Windows.Forms.ListViewItemStates.Selected) = 1 Then
|
by: ChristopherJohn |
last post by:
I'm new to this so if this is posted in the wrong area, please advise.
I'm using the DrawItem event to change the color of the text for the selected tab of a TabControl with the tabs on the top. The color change worx fine.
HOWEVER, The 3d line (a little white line) remains under the selected tab in the same way it appears under the unselected tabs. If you leave DrawMode at Normal, that line does not appear under the selected tab.
I hope...
|
by: raja11112222 |
last post by:
Hi
I use more than one button, For all button i use One Customize class .In there DrawItem is used to place picture in button.
My problem is for a particular button DrawItem is not called...
How can i rectify it
can any one help me.
Raja
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |