Hey Group,
Sorry but i`ve been searching everywhere for this even went out and bought a
ADO book and still carn`t find what im looking for:(
I have the following code for my postion changed:
Private Sub objdsAccess_Pos itionChanged()
If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 Then
Me.ComboBox1.Se lectedValue =
objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess,
"Users").Positi on).Item("Acces sLevelID")
End If
Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss,
"Users").Positi on + 1).ToString + " of ") + Me.BindingConte xt(objdsAccess,
"Users").Count. ToString)
End Sub
This works fine, with my Combo Box. My ComboBox is using the following code:
Private Sub ComboBox1_Selec tedIndexChanged (ByVal sender As Object, ByVal e
As System.EventArg s) Handles ComboBox1.Selec tedIndexChanged
If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 And Not
mlLoading Then
objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess,
"Users").Positi on).Item("Acces sLevelID") = Me.ComboBox1.Se lectedValue
End If
End Sub
This all works fine, if im using Navigation buttons and calling:
Me.objdsAccess_ PositionChanged ().
However I`ve now added a Datagrid to my Form, as I select a Row in my form.
How would i get it to update my ComboBox, and notice the position changed?
Thanks
MCN
Nov 20 '05
12 1241
CJ,
I`ve done the below but with no joy:(
i`ve mailed you privatly with my App attached, i tryed to post my App here
(60kb) but it dosn`t seem to want to post:(
Cheers
MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message
news:10******** *****@corp.supe rnews.com... Simon,
Alright, in your form load create a currency manager (using your _cmDsAccess) with
_cmDsAccess = BindingContext( objdsAccess, "Users")
now you previously declared this as
private WithEvents _cmDsAccess as CurrencyManager
then you want to create a method such as
Private Sub _cmDsAccess_Pos itionChanged(By Val sender As Object, ByVal e As System.EventArg s) Handles _cmDsAccess.Pos itionChanged
inisde this method is where you want to do
objdsAccess_Pos itionChanged()
try it out. -CJ
"MadCrazyNewbie " <te**@nospam.co m> wrote in message news:fL******** ************@ka roo.co.uk... From my Nav buttons I call objDsAccess_Pos titionChanged() for example:
Private Sub btnNavFirst_Cli ck(ByVal sender As System.Object, ByVal e As System.EventArg s) Handles btnNavFirst.Cli ck Me.BindingConte xt(objdsAccess, "Users").Positi on = 0 Me.objdsAccess_ PositionChanged () End Sub
My Datatable is bound to objdsAccess.Use rs.
I have a relationship Setup from my Users Table, AccessID row to my AccessLevel Table AccessID.
My AccessLevelID Table has a AccessLevel Feild in it to which my
ComboBox Looks at.
Ta MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message news:10******** *****@corp.supe rnews.com... Killin me dog.
Alright, lets back it up a little bit. =)
1) objdsAccess_Pos itionChanged()
How is this called? what causes this to be called.? 2) Me.BindingConte xt(objdsAccess, "Users").
that right there is a currency manager. you can assign a variable to it, makes things easier. Is your datagrid bound to this datatable on the objDsAccess? what table is it bound to? "MadCrazyNewbie " <te**@nospam.co m> wrote in message news:u7******** ************@ka roo.co.uk... > Sorry CJ, I Must be going blind. > > I think im going mad aswell and probably missing the point:( > > How do i get it to do my positions changed? I have my Nav buttons setup to > call: Me.objDsAccess_ PositionChanged . > > My Position Change code is as follows: > > Private Sub objdsAccess_Pos itionChanged() > If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 Then > Me.ComboBox1.Se lectedValue = > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > "Users").Positi on).Item("Acces sLevelID") > End If > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > "Users").Positi on + 1).ToString + " of ") + Me.BindingConte xt(objdsAccess, > "Users").Count. ToString) > End Sub > > How do i get this to work for my Datagrid. Do I need a: > Datagrid1_Selec tedIndexChanged . Sorry i don`t know where to call a datgird > PostionChanged from or am I barking up the wrong tree? > > Sorry to be a pain. > > Cheers > MCN(Si) > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > news:10******** *****@corp.supe rnews.com... > > Go to your Code Window... Look at the combo box on the top left side.. > you > > can't miss it.. there are two of them. right above your code.
look > there. > > =) > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > news:iv******** ************@ka roo.co.uk... > > > CJ > > > > > > Im not to bad been really busy with work and wot not:( All work and no > > > play:( > > > > > > Anyways ....... I`ve looked in my propery Browser but i carn`t seem to > > find > > > cmDsAccess anywhere in there:( > > > > > > Any Ideas? > > > > > > Ta > > > MCN(Si) > > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > news:10******** *****@corp.supe rnews.com... > > > > Simon, > > > > > > > > since you declared your cmDsAccess WithEvents you can look up
in the > top > > > > left dropdown where it describes all you objects etc (like textboxes > and > > > so > > > > on). > > > > > > > > in there you will see your cmDsAccess object. If you click on it, > > you'll > > > > see the events on the right side combo box. One of those will be > > position > > > > changed. > > > > > > > > click it (subscribing to it) and then that is your notifcation that > the > > > row > > > > position has changed within your datagrid. At that point, you can do > > > > whatever you want. for exmaple, on your position chaged event you can > > get > > > > the current row from the currency manager
(cmDsAccess.Cur rent()) and > > > > maniuplate your combo boxes based off that. > > > > > > > > How are things? Things are busy as sh** > > > > > > > > =) > > > > > > > > -CJ > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > news:Dc******** ************@ka roo.co.uk... > > > > > Hey CJ, > > > > > > > > > > Hows you doing? > > > > > > > > > > Right i`ve added Private WithEvents cmDsAccess As CurrencyManager in > > my > > > > > Class Decleration and then added cmDsAccess = > > > BindingContext( objdsAccess, > > > > > "Users") in my form load. > > > > > > > > > > How would i now get it to change my bindings on my textboxs, and > Combo > > > box > > > > > as i select rows in my Datagrid? > > > > > > > > > > ManyThanks > > > > > MCN(Si) > > > > > > > > > > By Datasource, do you mean the > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > > > news:10******** *****@corp.supe rnews.com... > > > > > > If they are associated with the same currency manager it will do > it > > > > > > automatically. > > > > > > > > > > > > However, the probably isn't the case. anyways, in ADO.NET you > have > > > > these > > > > > > things called CurrencyManager s that basically act kinda
like an > old > > > > > > ADODB.Recordset (yes like many things in .NET). Anyways, > > > > CurrencyManager s > > > > > > are created from bindings (actually you get them from the > > > bindingContext > > > > > of > > > > > > the control). > > > > > > > > > > > > This CurrencyManager is automatically subscribed the the datagrid > > > events > > > > > (or > > > > > > vise versa, either way, upon changing the position in a datagrid > > (i.e > > > > > moving > > > > > > to a new row) the currency managers position is changed
for you > and > > an > > > > > event > > > > > > is fired. > > > > > > > > > > > > so the best way to handle this is. > > > > > > > > > > > > In your class delcaration do this... > > > > > > > > > > > > Private WithEvents _cmMyDataset as CurrencyManager > > > > > > > > > > > > Then in your form load (best place I think, you can do it others > > like > > > in > > > > > > your constructor, but not really a big deal. > > > > > > > > > > > > _cmMyDataSet = BindingContext( myDataSource, "myDataTabl e") > > > > > > > > > > > > Obviously replace those with valid values for your dataset and > > > > datatable. > > > > > > > > > > > > Then, in your property browser on the top left (the drop down) you > > can > > > > > find > > > > > > the variable _cmMyDataSet Variable and the events
associated with > it > > > on > > > > > the > > > > > > right. > > > > > > > > > > > > Subscribe to the PositionChanged event, and then you can
do > whatever > > > you > > > > > > want. (i.e something with your combobox based on new row data). > > > > > > > > > > > > CurrencyMangers are also INCREDIBLY useful when doing
record > > > > manipulation, > > > > > > because you can actually turn off the binding using the > > > > .SuspendBinding () > > > > > > and .ResumeBinding( ) methods, so if your working with
large lists > > > (i.e. > > > > > > filling a large dataset) you can use suspendbinding while your > > filling > > > > it > > > > > > (otherwise, every time an item is added it goes through
the > process > > of > > > > > > repainting a control because of the ListChanged event on
an > > > IListSource > > > > > > item. > > > > > > > > > > > > HTH, > > > > > > CJ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > > > news:yG******** ************@ka roo.co.uk... > > > > > > > Hey Group, > > > > > > > > > > > > > > Sorry but i`ve been searching everywhere for this even went out > > and > > > > > bought > > > > > > a > > > > > > > ADO book and still carn`t find what im looking for:( > > > > > > > > > > > > > > I have the following code for my postion changed: > > > > > > > > > > > > > > Private Sub objdsAccess_Pos itionChanged() > > > > > > > If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 > Then > > > > > > > Me.ComboBox1.Se lectedValue = > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > "Users").Positi on).Item("Acces sLevelID") > > > > > > > End If > > > > > > > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > > > > > > > "Users").Positi on + 1).ToString + " of ") + > > > > > > Me.BindingConte xt(objdsAccess, > > > > > > > "Users").Count. ToString) > > > > > > > End Sub > > > > > > > > > > > > > > This works fine, with my Combo Box. My ComboBox is using the > > > following > > > > > > code: > > > > > > > > > > > > > > Private Sub ComboBox1_Selec tedIndexChanged (ByVal sender
As > Object, > > > > ByVal > > > > > e > > > > > > > As System.EventArg s) Handles ComboBox1.Selec tedIndexChanged > > > > > > > If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 > And > > > Not > > > > > > > mlLoading Then > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > "Users").Positi on).Item("Acces sLevelID") = > > > Me.ComboBox1.Se lectedValue > > > > > > > End If > > > > > > > End Sub > > > > > > > > > > > > > > This all works fine, if im using Navigation buttons and calling: > > > > > > > Me.objdsAccess_ PositionChanged (). > > > > > > > > > > > > > > However I`ve now added a Datagrid to my Form, as I
select a Row > in > > > my > > > > > > form. > > > > > > > How would i get it to update my ComboBox, and notice the > position > > > > > changed? > > > > > > > > > > > > > > Thanks > > > > > > > MCN > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
simon, give me some time to get it... may not be till tonight. can't access
home email from here.
"MadCrazyNewbie " <te**@nospam.co m> wrote in message
news:NJ******** ************@ka roo.co.uk... CJ,
I`ve done the below but with no joy:(
i`ve mailed you privatly with my App attached, i tryed to post my App
here (60kb) but it dosn`t seem to want to post:(
Cheers MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message news:10******** *****@corp.supe rnews.com... Simon,
Alright, in your form load create a currency manager (using your _cmDsAccess) with
_cmDsAccess = BindingContext( objdsAccess, "Users")
now you previously declared this as
private WithEvents _cmDsAccess as CurrencyManager
then you want to create a method such as
Private Sub _cmDsAccess_Pos itionChanged(By Val sender As Object, ByVal e
As System.EventArg s) Handles _cmDsAccess.Pos itionChanged
inisde this method is where you want to do
objdsAccess_Pos itionChanged()
try it out. -CJ
"MadCrazyNewbie " <te**@nospam.co m> wrote in message news:fL******** ************@ka roo.co.uk... From my Nav buttons I call objDsAccess_Pos titionChanged() for example:
Private Sub btnNavFirst_Cli ck(ByVal sender As System.Object, ByVal e
As System.EventArg s) Handles btnNavFirst.Cli ck Me.BindingConte xt(objdsAccess, "Users").Positi on = 0 Me.objdsAccess_ PositionChanged () End Sub
My Datatable is bound to objdsAccess.Use rs.
I have a relationship Setup from my Users Table, AccessID row to my AccessLevel Table AccessID.
My AccessLevelID Table has a AccessLevel Feild in it to which my ComboBox Looks at.
Ta MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message news:10******** *****@corp.supe rnews.com... > Killin me dog. > > Alright, lets back it up a little bit. =) > > 1) objdsAccess_Pos itionChanged() > > How is this called? what causes this to be called.? > > > > 2) Me.BindingConte xt(objdsAccess, "Users"). > > that right there is a currency manager. you can assign a variable
to it, > makes things easier. Is your datagrid bound to this datatable on
the > objDsAccess? what table is it bound to? > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > news:u7******** ************@ka roo.co.uk... > > Sorry CJ, I Must be going blind. > > > > I think im going mad aswell and probably missing the point:( > > > > How do i get it to do my positions changed? I have my Nav buttons setup to > > call: Me.objDsAccess_ PositionChanged . > > > > My Position Change code is as follows: > > > > Private Sub objdsAccess_Pos itionChanged() > > If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 Then > > Me.ComboBox1.Se lectedValue = > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > "Users").Positi on).Item("Acces sLevelID") > > End If > > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > > "Users").Positi on + 1).ToString + " of ") + Me.BindingConte xt(objdsAccess, > > "Users").Count. ToString) > > End Sub > > > > How do i get this to work for my Datagrid. Do I need a: > > Datagrid1_Selec tedIndexChanged . Sorry i don`t know where to call a datgird > > PostionChanged from or am I barking up the wrong tree? > > > > Sorry to be a pain. > > > > Cheers > > MCN(Si) > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > news:10******** *****@corp.supe rnews.com... > > > Go to your Code Window... Look at the combo box on the top left side.. > > you > > > can't miss it.. there are two of them. right above your code. look > > there. > > > =) > > > > > > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > news:iv******** ************@ka roo.co.uk... > > > > CJ > > > > > > > > Im not to bad been really busy with work and wot not:( All
work and no > > > > play:( > > > > > > > > Anyways ....... I`ve looked in my propery Browser but i carn`t seem to > > > find > > > > cmDsAccess anywhere in there:( > > > > > > > > Any Ideas? > > > > > > > > Ta > > > > MCN(Si) > > > > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > > news:10******** *****@corp.supe rnews.com... > > > > > Simon, > > > > > > > > > > since you declared your cmDsAccess WithEvents you can look
up in the > > top > > > > > left dropdown where it describes all you objects etc (like textboxes > > and > > > > so > > > > > on). > > > > > > > > > > in there you will see your cmDsAccess object. If you click
on it, > > > you'll > > > > > see the events on the right side combo box. One of those
will be > > > position > > > > > changed. > > > > > > > > > > click it (subscribing to it) and then that is your
notifcation that > > the > > > > row > > > > > position has changed within your datagrid. At that point,
you can > do > > > > > whatever you want. for exmaple, on your position chaged
event you > can > > > get > > > > > the current row from the currency manager (cmDsAccess.Cur rent()) and > > > > > maniuplate your combo boxes based off that. > > > > > > > > > > How are things? Things are busy as sh** > > > > > > > > > > =) > > > > > > > > > > -CJ > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > > news:Dc******** ************@ka roo.co.uk... > > > > > > Hey CJ, > > > > > > > > > > > > Hows you doing? > > > > > > > > > > > > Right i`ve added Private WithEvents cmDsAccess As CurrencyManager > in > > > my > > > > > > Class Decleration and then added cmDsAccess = > > > > BindingContext( objdsAccess, > > > > > > "Users") in my form load. > > > > > > > > > > > > How would i now get it to change my bindings on my
textboxs, and > > Combo > > > > box > > > > > > as i select rows in my Datagrid? > > > > > > > > > > > > ManyThanks > > > > > > MCN(Si) > > > > > > > > > > > > By Datasource, do you mean the > > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > > > > news:10******** *****@corp.supe rnews.com... > > > > > > > If they are associated with the same currency manager it will do > > it > > > > > > > automatically. > > > > > > > > > > > > > > However, the probably isn't the case. anyways, in
ADO.NET you > > have > > > > > these > > > > > > > things called CurrencyManager s that basically act kinda like an > > old > > > > > > > ADODB.Recordset (yes like many things in .NET).
Anyways, > > > > > CurrencyManager s > > > > > > > are created from bindings (actually you get them from
the > > > > bindingContext > > > > > > of > > > > > > > the control). > > > > > > > > > > > > > > This CurrencyManager is automatically subscribed the the > datagrid > > > > events > > > > > > (or > > > > > > > vise versa, either way, upon changing the position in a datagrid > > > (i.e > > > > > > moving > > > > > > > to a new row) the currency managers position is changed for you > > and > > > an > > > > > > event > > > > > > > is fired. > > > > > > > > > > > > > > so the best way to handle this is. > > > > > > > > > > > > > > In your class delcaration do this... > > > > > > > > > > > > > > Private WithEvents _cmMyDataset as CurrencyManager > > > > > > > > > > > > > > Then in your form load (best place I think, you can do
it others > > > like > > > > in > > > > > > > your constructor, but not really a big deal. > > > > > > > > > > > > > > _cmMyDataSet = BindingContext( myDataSource,
"myDataTabl e") > > > > > > > > > > > > > > Obviously replace those with valid values for your
dataset and > > > > > datatable. > > > > > > > > > > > > > > Then, in your property browser on the top left (the drop down) > you > > > can > > > > > > find > > > > > > > the variable _cmMyDataSet Variable and the events associated > with > > it > > > > on > > > > > > the > > > > > > > right. > > > > > > > > > > > > > > Subscribe to the PositionChanged event, and then you can do > > whatever > > > > you > > > > > > > want. (i.e something with your combobox based on new row data). > > > > > > > > > > > > > > CurrencyMangers are also INCREDIBLY useful when doing record > > > > > manipulation, > > > > > > > because you can actually turn off the binding using the > > > > > .SuspendBinding () > > > > > > > and .ResumeBinding( ) methods, so if your working with large > lists > > > > (i.e. > > > > > > > filling a large dataset) you can use suspendbinding
while your > > > filling > > > > > it > > > > > > > (otherwise, every time an item is added it goes through the > > process > > > of > > > > > > > repainting a control because of the ListChanged event on an > > > > IListSource > > > > > > > item. > > > > > > > > > > > > > > HTH, > > > > > > > CJ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > > > > news:yG******** ************@ka roo.co.uk... > > > > > > > > Hey Group, > > > > > > > > > > > > > > > > Sorry but i`ve been searching everywhere for this even went > out > > > and > > > > > > bought > > > > > > > a > > > > > > > > ADO book and still carn`t find what im looking for:( > > > > > > > > > > > > > > > > I have the following code for my postion changed: > > > > > > > > > > > > > > > > Private Sub objdsAccess_Pos itionChanged() > > > > > > > > If Me.BindingConte xt(objdsAccess,
"Users").Positi on <> -1 > > Then > > > > > > > > Me.ComboBox1.Se lectedValue = > > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > > "Users").Positi on).Item("Acces sLevelID") > > > > > > > > End If > > > > > > > > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > > > > > > > > "Users").Positi on + 1).ToString + " of ") + > > > > > > > Me.BindingConte xt(objdsAccess, > > > > > > > > "Users").Count. ToString) > > > > > > > > End Sub > > > > > > > > > > > > > > > > This works fine, with my Combo Box. My ComboBox is
using the > > > > following > > > > > > > code: > > > > > > > > > > > > > > > > Private Sub ComboBox1_Selec tedIndexChanged (ByVal
sender As > > Object, > > > > > ByVal > > > > > > e > > > > > > > > As System.EventArg s) Handles
ComboBox1.Selec tedIndexChanged > > > > > > > > If Me.BindingConte xt(objdsAccess,
"Users").Positi on <> -1 > > And > > > > Not > > > > > > > > mlLoading Then > > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > > "Users").Positi on).Item("Acces sLevelID") = > > > > Me.ComboBox1.Se lectedValue > > > > > > > > End If > > > > > > > > End Sub > > > > > > > > > > > > > > > > This all works fine, if im using Navigation buttons
and > calling: > > > > > > > > Me.objdsAccess_ PositionChanged (). > > > > > > > > > > > > > > > > However I`ve now added a Datagrid to my Form, as I
select a > Row > > in > > > > my > > > > > > > form. > > > > > > > > How would i get it to update my ComboBox, and notice
the > > position > > > > > > changed? > > > > > > > > > > > > > > > > Thanks > > > > > > > > MCN > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
simon, give me some time to get it... may not be till tonight. can't access
home email from here.
"MadCrazyNewbie " <te**@nospam.co m> wrote in message
news:NJ******** ************@ka roo.co.uk... CJ,
I`ve done the below but with no joy:(
i`ve mailed you privatly with my App attached, i tryed to post my App
here (60kb) but it dosn`t seem to want to post:(
Cheers MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message news:10******** *****@corp.supe rnews.com... Simon,
Alright, in your form load create a currency manager (using your _cmDsAccess) with
_cmDsAccess = BindingContext( objdsAccess, "Users")
now you previously declared this as
private WithEvents _cmDsAccess as CurrencyManager
then you want to create a method such as
Private Sub _cmDsAccess_Pos itionChanged(By Val sender As Object, ByVal e
As System.EventArg s) Handles _cmDsAccess.Pos itionChanged
inisde this method is where you want to do
objdsAccess_Pos itionChanged()
try it out. -CJ
"MadCrazyNewbie " <te**@nospam.co m> wrote in message news:fL******** ************@ka roo.co.uk... From my Nav buttons I call objDsAccess_Pos titionChanged() for example:
Private Sub btnNavFirst_Cli ck(ByVal sender As System.Object, ByVal e
As System.EventArg s) Handles btnNavFirst.Cli ck Me.BindingConte xt(objdsAccess, "Users").Positi on = 0 Me.objdsAccess_ PositionChanged () End Sub
My Datatable is bound to objdsAccess.Use rs.
I have a relationship Setup from my Users Table, AccessID row to my AccessLevel Table AccessID.
My AccessLevelID Table has a AccessLevel Feild in it to which my ComboBox Looks at.
Ta MCN(Si)
"CJ Taylor" <no****@blowgoa ts.com> wrote in message news:10******** *****@corp.supe rnews.com... > Killin me dog. > > Alright, lets back it up a little bit. =) > > 1) objdsAccess_Pos itionChanged() > > How is this called? what causes this to be called.? > > > > 2) Me.BindingConte xt(objdsAccess, "Users"). > > that right there is a currency manager. you can assign a variable
to it, > makes things easier. Is your datagrid bound to this datatable on
the > objDsAccess? what table is it bound to? > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > news:u7******** ************@ka roo.co.uk... > > Sorry CJ, I Must be going blind. > > > > I think im going mad aswell and probably missing the point:( > > > > How do i get it to do my positions changed? I have my Nav buttons setup to > > call: Me.objDsAccess_ PositionChanged . > > > > My Position Change code is as follows: > > > > Private Sub objdsAccess_Pos itionChanged() > > If Me.BindingConte xt(objdsAccess, "Users").Positi on <> -1 Then > > Me.ComboBox1.Se lectedValue = > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > "Users").Positi on).Item("Acces sLevelID") > > End If > > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > > "Users").Positi on + 1).ToString + " of ") + Me.BindingConte xt(objdsAccess, > > "Users").Count. ToString) > > End Sub > > > > How do i get this to work for my Datagrid. Do I need a: > > Datagrid1_Selec tedIndexChanged . Sorry i don`t know where to call a datgird > > PostionChanged from or am I barking up the wrong tree? > > > > Sorry to be a pain. > > > > Cheers > > MCN(Si) > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > news:10******** *****@corp.supe rnews.com... > > > Go to your Code Window... Look at the combo box on the top left side.. > > you > > > can't miss it.. there are two of them. right above your code. look > > there. > > > =) > > > > > > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > news:iv******** ************@ka roo.co.uk... > > > > CJ > > > > > > > > Im not to bad been really busy with work and wot not:( All
work and no > > > > play:( > > > > > > > > Anyways ....... I`ve looked in my propery Browser but i carn`t seem to > > > find > > > > cmDsAccess anywhere in there:( > > > > > > > > Any Ideas? > > > > > > > > Ta > > > > MCN(Si) > > > > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > > news:10******** *****@corp.supe rnews.com... > > > > > Simon, > > > > > > > > > > since you declared your cmDsAccess WithEvents you can look
up in the > > top > > > > > left dropdown where it describes all you objects etc (like textboxes > > and > > > > so > > > > > on). > > > > > > > > > > in there you will see your cmDsAccess object. If you click
on it, > > > you'll > > > > > see the events on the right side combo box. One of those
will be > > > position > > > > > changed. > > > > > > > > > > click it (subscribing to it) and then that is your
notifcation that > > the > > > > row > > > > > position has changed within your datagrid. At that point,
you can > do > > > > > whatever you want. for exmaple, on your position chaged
event you > can > > > get > > > > > the current row from the currency manager (cmDsAccess.Cur rent()) and > > > > > maniuplate your combo boxes based off that. > > > > > > > > > > How are things? Things are busy as sh** > > > > > > > > > > =) > > > > > > > > > > -CJ > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > > news:Dc******** ************@ka roo.co.uk... > > > > > > Hey CJ, > > > > > > > > > > > > Hows you doing? > > > > > > > > > > > > Right i`ve added Private WithEvents cmDsAccess As CurrencyManager > in > > > my > > > > > > Class Decleration and then added cmDsAccess = > > > > BindingContext( objdsAccess, > > > > > > "Users") in my form load. > > > > > > > > > > > > How would i now get it to change my bindings on my
textboxs, and > > Combo > > > > box > > > > > > as i select rows in my Datagrid? > > > > > > > > > > > > ManyThanks > > > > > > MCN(Si) > > > > > > > > > > > > By Datasource, do you mean the > > > > > > "CJ Taylor" <no****@blowgoa ts.com> wrote in message > > > > > > news:10******** *****@corp.supe rnews.com... > > > > > > > If they are associated with the same currency manager it will do > > it > > > > > > > automatically. > > > > > > > > > > > > > > However, the probably isn't the case. anyways, in
ADO.NET you > > have > > > > > these > > > > > > > things called CurrencyManager s that basically act kinda like an > > old > > > > > > > ADODB.Recordset (yes like many things in .NET).
Anyways, > > > > > CurrencyManager s > > > > > > > are created from bindings (actually you get them from
the > > > > bindingContext > > > > > > of > > > > > > > the control). > > > > > > > > > > > > > > This CurrencyManager is automatically subscribed the the > datagrid > > > > events > > > > > > (or > > > > > > > vise versa, either way, upon changing the position in a datagrid > > > (i.e > > > > > > moving > > > > > > > to a new row) the currency managers position is changed for you > > and > > > an > > > > > > event > > > > > > > is fired. > > > > > > > > > > > > > > so the best way to handle this is. > > > > > > > > > > > > > > In your class delcaration do this... > > > > > > > > > > > > > > Private WithEvents _cmMyDataset as CurrencyManager > > > > > > > > > > > > > > Then in your form load (best place I think, you can do
it others > > > like > > > > in > > > > > > > your constructor, but not really a big deal. > > > > > > > > > > > > > > _cmMyDataSet = BindingContext( myDataSource,
"myDataTabl e") > > > > > > > > > > > > > > Obviously replace those with valid values for your
dataset and > > > > > datatable. > > > > > > > > > > > > > > Then, in your property browser on the top left (the drop down) > you > > > can > > > > > > find > > > > > > > the variable _cmMyDataSet Variable and the events associated > with > > it > > > > on > > > > > > the > > > > > > > right. > > > > > > > > > > > > > > Subscribe to the PositionChanged event, and then you can do > > whatever > > > > you > > > > > > > want. (i.e something with your combobox based on new row data). > > > > > > > > > > > > > > CurrencyMangers are also INCREDIBLY useful when doing record > > > > > manipulation, > > > > > > > because you can actually turn off the binding using the > > > > > .SuspendBinding () > > > > > > > and .ResumeBinding( ) methods, so if your working with large > lists > > > > (i.e. > > > > > > > filling a large dataset) you can use suspendbinding
while your > > > filling > > > > > it > > > > > > > (otherwise, every time an item is added it goes through the > > process > > > of > > > > > > > repainting a control because of the ListChanged event on an > > > > IListSource > > > > > > > item. > > > > > > > > > > > > > > HTH, > > > > > > > CJ > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > "MadCrazyNewbie " <te**@nospam.co m> wrote in message > > > > > > > news:yG******** ************@ka roo.co.uk... > > > > > > > > Hey Group, > > > > > > > > > > > > > > > > Sorry but i`ve been searching everywhere for this even went > out > > > and > > > > > > bought > > > > > > > a > > > > > > > > ADO book and still carn`t find what im looking for:( > > > > > > > > > > > > > > > > I have the following code for my postion changed: > > > > > > > > > > > > > > > > Private Sub objdsAccess_Pos itionChanged() > > > > > > > > If Me.BindingConte xt(objdsAccess,
"Users").Positi on <> -1 > > Then > > > > > > > > Me.ComboBox1.Se lectedValue = > > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > > "Users").Positi on).Item("Acces sLevelID") > > > > > > > > End If > > > > > > > > Me.lblNavLocati on.Text = (((Me.BindingCo ntext(objdsAcce ss, > > > > > > > > "Users").Positi on + 1).ToString + " of ") + > > > > > > > Me.BindingConte xt(objdsAccess, > > > > > > > > "Users").Count. ToString) > > > > > > > > End Sub > > > > > > > > > > > > > > > > This works fine, with my Combo Box. My ComboBox is
using the > > > > following > > > > > > > code: > > > > > > > > > > > > > > > > Private Sub ComboBox1_Selec tedIndexChanged (ByVal
sender As > > Object, > > > > > ByVal > > > > > > e > > > > > > > > As System.EventArg s) Handles
ComboBox1.Selec tedIndexChanged > > > > > > > > If Me.BindingConte xt(objdsAccess,
"Users").Positi on <> -1 > > And > > > > Not > > > > > > > > mlLoading Then > > > > > > > > objdsAccess.Use rs.Rows(Me.Bind ingContext(objd sAccess, > > > > > > > > "Users").Positi on).Item("Acces sLevelID") = > > > > Me.ComboBox1.Se lectedValue > > > > > > > > End If > > > > > > > > End Sub > > > > > > > > > > > > > > > > This all works fine, if im using Navigation buttons
and > calling: > > > > > > > > Me.objdsAccess_ PositionChanged (). > > > > > > > > > > > > > > > > However I`ve now added a Datagrid to my Form, as I
select a > Row > > in > > > > my > > > > > > > form. > > > > > > > > How would i get it to update my ComboBox, and notice
the > > position > > > > > > changed? > > > > > > > > > > > > > > > > Thanks > > > > > > > > MCN > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Nakor |
last post by:
Hello,
I am a Computer Programmer Analyst student. I am taking this course
which for this week's assignment requires me to join some newsgroups.
I am sorry to have to spam you with such useless crap.
Regardless I am supposed to instigate a response of some sort, so could
someone please fulfill that requirement for me?
Thanks,
|
by: Marco Herrn |
last post by:
Hi,
I tried to install a package under debian, where in the postinstall
phase some python scripts are called. Then I got the error
"Sorry invalid mode: U".
I looked what this script does and it is the following:
python -O /usr/lib/python2.3/compileall.py /usr/share/woody
I looked where exactly in compileall.py the error occurs and it is here:
|
by: Ivan Paganini |
last post by:
Sorry, and thanks for the help. I will be more carefull in the next time.
Ivan S>P<M
|
by: Montrose... |
last post by:
After working in c# for a year, the only conclusion I can come to is
that I wish I knew c.
All I need is Linux, the gnu c compiler and I can do anything.
Web services are just open sockets hooked up to interfaces.
The Gtk is more than enough gui.
|
by: Nitin Bhardwaj |
last post by:
Sorry I made a typo in the code
The correct one is like this :
#include <stdio.h>
int main(void)
{
int *buf1 = malloc(10*sizeof(int));
int *buf2 = malloc(10*sizeof(int));
printf(buf1 > buf2 ? "Downwards" : "Upwards");
| |
by: Wizard |
last post by:
Hi All,
Sorry for been a pain in the ass, but im looking everywhere and can't seem
to find the answers.
I would like to build a small ASP based site.
I have 4 departments, and what i would like to do is have a list of
usernames and password.
I would like the department heads to have a logon and be able to see only
there departments usernames and password when they logon.
|
by: Carlo, MCP |
last post by:
Sorry for the Italian previous message. It was a sending mistake.
Sorry again.
C.
|
by: anand.1783 |
last post by:
Dear moderator,
Sorry for the inconvinience.
So I am really sorry for the mistake.
It happend by mistake and it will not be repeated. so kindly consider
my Apology.
Anand.
|
by: maya |
last post by:
I have a quick HomeSite question.. sorry, my news server doesn't carry
HomeSite ng...
I just need to know how to switch from generating special chars (called
"entities" in XML) with numbers instead of their names -- need to do
this b/c for XSLT/FF only numbers work..
I've been looking for a while now under "options", can't find it..
thank you very much..
|
by: JamesCX DiPietro |
last post by:
I just wanted to apologize again to Mr. Stuckle and Mr. Fesser
for my awful and despicable behavior. THey were right all along
and I behaved like a total shithead. I'm sorry, and I will never
try to bother you again in this ng.
Jerry Stuckle and Mike Fesser are both extremely helpful and
brilliant individuals who volunteer here to answer technical
questions. They don't have to do that, but they are willing
to share their insight with...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |