Hi everyone,
How do I get the error message?
I have a very long sproc that needs to be done in one transaction. I
have an error happening somewhere in the middle, but with a low enough
severity it doesn't terminate the procedure. To make sure I don't
miss any errors, I am storing @@error after every statement:
If @Error<=@@error Set @Error=@@error
that way at the end I can say if @error<>0 rollback trans.
How do I get the error message? I have the number, and what I get
from sysmessages has the wildcards in it %d and so on.
Also , I can't use Xact_Abort, the web user permissions don't allow
it.
Or better yet is there a better way to do this? Sql has
@@total_errors - since the server was started, how about since the
transaction or the sproc was started.
Thanks a ton
Pachydermitis
1  1395 
[posted and mailed, please reply in news]
Pachydermitis (de******@hotma il.com) writes: How do I get the error message?
I have a very long sproc that needs to be done in one transaction. I
have an error happening somewhere in the middle, but with a low enough
severity it doesn't terminate the procedure. To make sure I don't
miss any errors, I am storing @@error after every statement:
If @Error<=@@error Set @Error=@@error
that way at the end I can say if @error<>0 rollback trans.
How do I get the error message? I have the number, and what I get
from sysmessages has the wildcards in it %d and so on.
Also , I can't use Xact_Abort, the web user permissions don't allow
it.
Or better yet is there a better way to do this? Sql has
@@total_errors - since the server was started, how about since the
transaction or the sproc was started.
There is no way to get the text of the error message in SQL. You must
catch it on client level.
If your code is as above, there is a serious problem in your error
handling. @@error is set after each statement, so you will always
set @error to 0 above.
I have an article on my web site about error handling, that you may
find useful. http://www.sommarskog.se/error-handling-I.html.
--
Erland Sommarskog, SQL Server MVP, so****@algonet. se
Books Online for SQL Server SP3 at http://www.microsoft.com/sql/techinf...2000/books.asp This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: lkrubner |
last post by:
This is a general computer question, but I'm writing in PHP so I'll
post this to comp.lang.php.
I've been writing a content management system. I've a Singleton object
that keeps track of all errors and stores them in an array. As things
work right now, I write out each error message individually. I'm
thinking that as the code grows, this system will not continue to
scale. Right now my software consists of 1.4 megs of PHP code. I don't...
|
by: jenny |
last post by:
Hi,
I have a java socket program running on AIX 4.3.3.0 platform. It
opens a socket and sends data to our customer over a leased fractional
T1 line. The line is always connected. However, periodically, I see
"java.IO.Exception: There is no process to read data written to a
pipe" error message in my log file. Can anybody tell me in what cases
this error message could occur?
The other strange thing is that our customer would report...
|
by: DataBard007 |
last post by:
Hello Access Gurus:
I use Win98SE and Access97.
I just built a simple Access97 application which holds all contact
information for my personal contacts, such as first name, last name,
address, city, state, etc.
When the user wants to search for a particular record, he does two
things:
1. On the form is a text box on which he enters the text he is searching
for.
|
by: Brian Conway |
last post by:
I have no idea what is going on. I have a Login screen where someone types
in their login information and this populates a datagrid based off of the
login. Works great in debug and test through VS, however, when I change to
release and put it out on the web it fails giving me the following error
message
The underlying connection was closed. Could not establish a trust
relationship with the remote server.
|
by: John |
last post by:
Hi,
I was asked to create a function to detect cursed words in user's input and
reject user's input if found, does anybody know existing codes I can use?
TIA
| | |
by: Brian Tkatch |
last post by:
Server: DB2/SUN 8.1.6
Client: DB2 Connect Personal Edition (No 11)
<URL:ftp://ftp.software.ibm.com/ps/products/db2/fixes2/english-us/db2winIA32v8/fixpak/FP11_WR21365/FP11_WR21365_CONPE.exe>
Uninstalled old version, installed new version, and am now trying to
use the CLP.
<<<<<<<<<<<<
For more detailed help, refer to the Online Reference Manual.
|
by: lawrence k |
last post by:
I've made it habit to check all returns in my code, and usually, on
most projects, I'll have an error function that reports error messages
to some central location. I recently worked on a project where someone
suggested to me I was spending too much time writing error messages,
and that I was therefore missing the benefit of using a scripting
language. The idea, apparently, is that the PHP interpreter writes all
the error messages that are...
|
by: hyperpau |
last post by:
Before anything else, I am not a very technical expert when it comes to VBA coding.
I learned most of what I know by the excellent Access/VBA forum from bytes.com (formerly thescripts.com).
Ergo, I will be writing this article intended for those who are in the same level, or maybe lower, of my technical knowledge.
I would be using layman's words, or maybe, my own words as how I understand them, hoping, you will understand it the same way that...
|
by: hyperpau |
last post by:
Before anything else, I am not a very technical expert when it comes to VBA coding.
I learned most of what I know by the excellent Access/VBA forum from bytes.com (formerly thescripts.com).
Ergo, I will be writing this article intended for those who are in the same level, or maybe lower, of my technical knowledge.
I would be using layman's words, or maybe, my own words as how I understand them, hoping, you will understand it the same way that...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
