I need to be able to build postgres (7.4.3) with a given --prefix, but
then pack up the installation directory and deploy it in another
directory (as part of a product install, for instance).
I configured with --disable-rpath, but I'm still getting the
creating conversions... ERROR: could not access file
"$libdir/ascii_and_mic": No such file or directory
error when I try to run initdb from the new location. This is on Solaris
9, and I've verified that my LD_LIBRARY_PATH includes the postgres/lib
dir in the new location.
Is there a way I can get around this at runtime? I was under the
impression that --disable-rpath prevented library paths from being
compiled into the code, but maybe this "$libdir" is a different thing?
Thanks in advance for any help.
- DAP
=============== =============== =============== =========
David Parker Tazz Networks (401) 709-5130
---------------------------(end of broadcast)---------------------------
TIP 7: don't forget to increase your free space map settings 2 1226
David Parker wrote: I need to be able to build postgres (7.4.3) with a given --prefix, but then pack up the installation directory and deploy it in another directory (as part of a product install, for instance).
I configured with --disable-rpath, but I'm still getting the
This doesn't work. There are a lot more paths compiled in than just the
rpath. If you want to change the installation paths, you need to
rebuild from scratch.
--
Peter Eisentraut http://developer.postgresql.org/~petere/
---------------------------(end of broadcast)---------------------------
TIP 2: you can get off all lists at once with the unregister command
(send "unregister YourEmailAddres sHere" to ma*******@postg resql.org)
Peter Eisentraut <pe*****@gmx.ne t> writes: David Parker wrote: I need to be able to build postgres (7.4.3) with a given --prefix, but then pack up the installation directory and deploy it in another directory (as part of a product install, for instance).
This doesn't work.
Not at the moment anyway. Bruce and some other people did some work
last month towards supporting relocatable installs --- David, would you
like to experiment with CVS tip and see if it works for you?
regards, tom lane
---------------------------(end of broadcast)---------------------------
TIP 7: don't forget to increase your free space map settings This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: PjH |
last post by:
Newbie alert, here, so I apologise in advance.
I have a website hosted with one company, under one domain, that needs
to be moved to another host, and under another domain name.
I've tried moving the files, I've tried installing PHP Nuke through
CPanel, and I've tried copying databases exported using phpMyAdmin,
but nothing seems to work.
Help? I'm out of my depth now...
|
by: Jay |
last post by:
Hi,
After a power outage (and UPS failure), my boss's SQL Server 2000 won't
start (or crashes quickly or something). We don't have any backups, as it's
a test server. Is there a way to import the database files into a new SQL
installation? By "installation," I mean either a re-installed SS, a second
installation on the same PC, or maybe even on another PC. In another words,
given only the files sitting on the harddrive, is there a way to...
|
by: barbara |
last post by:
We've all data and log files located in SAN mount point. In case of
primary server crash, is it possible to unmount the volumes and
remount at secondary server? Do we have any problems with master DB
moving this way. Detach,attach or backup/restore are not our options.
Thanks
|
by: Kenneth McDonald |
last post by:
For unfortunate reasons, I'm considering switching back to Win XP
(from OS X) as my "main" system. Windows has so many annoyances that
I can only compare it to driving in the Bay Area at rush hour (OS X
is like driving in Portland at rush hour--not as bad, but getting
there), but there are really only a couple of things that are really,
absolutely preventing me from making the switch. Number one is the
lack of a decent command line and...
|
by: Hemant Shah |
last post by:
Folks,
I need to move HOME directory of an instance to another directory.
What is the best way of doing it?
Is changing password file enough? or dies DB2 store this info in it's own
config?
I am running UDB 8.2 on Linux and AIX.
Thanks.
| |
by: Ron Mexico |
last post by:
Hi,
Currently have an app that maintain that is written in VB6 and uses an
access db (backend db only used as a data store not writing to the db).
This app is a client app not server multi-teir app. It multi-form app that
takes in a lot of user input and gives out high end calculations
(engineering app). This app is starting to grow beyond the design and
becoming very hard to maintian. I was considering moving it to C#. All of
our new...
|
by: Marc C |
last post by:
Hello,
I have a SQL 2000 installation on a small partion that I would like to
move to a second larger partion on the same disk array array with the
config as follows:
d: full installation of prod and test instances with data and log files
100 GB
e: empty partion with 204 GB which I want to move the "whole thing"
I did an Xcopy of all files,permissions and attributes, checked for
errors, then I changed drive
|
by: linkswanted |
last post by:
We are your trusted source. World Moving & Storage is bonded and
licensed by the U.S. Department of Transportation and is one of the
largest residential moving and corporate relocation company in the
country. allows you to easily obtain no obligation moving quotes from
local movers, long distance movers, international movers, auto
transport, storage rentals and specialty movers. office movers,
commercial moving, residential moving, movers...
|
by: linkswanted |
last post by:
We are your trusted source. World Moving & Storage is bonded and
licensed by the U.S. Department of Transportation and is one of the
largest residential moving and corporate relocation company in the
country. allows you to easily obtain no obligation moving quotes from
local movers, long distance movers, international movers, auto
transport, storage rentals and specialty movers. office movers,
commercial moving, residential moving, movers...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |