I am trying to connect to the internet using a USB Ethernet adapter. It installs but won't connect to my dsl modem. The ethernet light on the modem doesn't even light up, though the same cable works plugged from the modem to the ethernet port on hubby's laptop. I thought the adapter was all I needed to connect..what am I missing?
Can someone please help point me in the right direction I really am stumped.
Apr 29 '07
13 55401
Go to the forum you want to post in, at the top there is an orange button "start a discussion". Click on this and you will get a form to fill in with your question.
Hi, I'm not a developer or programmer or techie, just someone who uses 3 computers in my business. I had the same problem at one point. I have basically the same setup and equipment as you (and number of computers, we'll call them Main, Second and Third) After months of frustration I found it was a third-party firewall that continually created problems with my network. So I uninstalled it (and actually never used it again, because it gave me nothing but problems). Then I went back to square one, like this: with all computers on and all (Windows) firewalls off (this was a key thing, to have all the firewalls off), with router and dsl connection on Main, set up and configured Network Connection on Main. Set up and configured Network Connection on Second (my laptop which has its own ethernet card), then plugged in the USB Ethernet adapter into Third, and set up and configured Network Connection. Then turned each computer's firewall back on. And it worked, and has worked ever since. I live in an area where there are occasional problems with the phone lines, so have to reset the router by turning off/on. But that's it. Networks are tricky.
I am trying to connect to the internet using a USB Ethernet adapter. It installs but won't connect to my dsl modem. The ethernet light on the modem doesn't even light up, though the same cable works plugged from the modem to the ethernet port on hubby's laptop. I thought the adapter was all I needed to connect..what am I missing?
Dunno if this applies or not, but you may need an Ethernet crossover cable rather than a straight-through one. It could be that your husband's laptop automatically detects the kind of cable and compensates, while yours doesn't.
IT WORKS!!!! :) Thank you all so much for the help. I tried shutting down the firewall, that didn't work, though I thought that might be it, it was the cable in the end, I plugged in the crossed over cable and it just worked. My son will be very happy when he gets home from school...we made him do a lot of dishes to get the adapter in the first place, parental guilt has been running kinda high..lol
Thanks again
Jenny
Sign in to post your reply or Sign up for a free account.
Similar topics |
by: Bassem |
last post by:
Hi all...
I searhed for a code to save and retrieve image from SQL database
using Data adapter but I didn't found anything.
Thanks,
Bassem.
|
by: Jonathan Woods |
last post by:
Hi there,
I have encountered problem of losing data sending over internet using
web service. I consume web service that connected Oracle Database. I
submit 687 SOAP Messages to 1 Web Method concurrently. (With
synchronize method)
public bool SubmitDPSuccessResult(string dpNo,string tkNo,string
|
by: yogesh |
last post by:
how to connect MySQL using C++ in redhat ....
can any one tell a sample of code to creat ,connect and execute the
statement in c++ code ...
please help me .....
|
by: ycinar |
last post by:
I am trying to familiarize myself with a C++ application which has a bug.
I'd like to have the application connect to WLAN when LAN is not available and vice versa.
Basically, it fails to connect to WLAN when LAN cable is plugged out. Is there a auto mechanism like Network manager which takes care of this? Or do i have to look after this in the code myself? If latter, any tips on how to do it?
Any help is appreciated.
Thanks!
|
by: sachinkale123 |
last post by:
I am using SQL Adapter to select data from a table in SQL Server Database. After creating Object I am filling that to a datatable. Assum that dataset has 5 row. After that I m updating that dataset and add 3 more rows. but not able to update that dataset to database table.
My code is following.
SqlDataAdapter SDA = new SqlDataAdapter("Select * from WFF", DAC.Conn); SDA.Fill(dt,"WFF");
//Updates dt here
SDA.Update(dt);
It does...
| |
by: saintme |
last post by:
Hello all,
I have a USB modem stick and a PoE network device. I want to connect the device to the Internet using the USB stick. The device has no other interfaces, so I must use its RJ-45 port. I tried The following:
Plugged the device into a PoE injector on the data-out port and using a USB-to-Ethernet adapter I connected the USB stick onto the data-in port of the injector.
This has failed. The USB stick doesn't even light up.
...
|
by: apple sauce |
last post by:
laptop runs vista. my isp is cox. modem is combination internet/phone jack modem by arris. my router is cisco.
my laptop was connected to the modem and it would not access the internet. finally got it to do so by hooking it up via a usb cord. a few friends and the tech were able to hook their laptops to the ethernet cable and access it just fine. (the reason i got an isp is because i will be working from home)
so now my work computer...
|
by: Ajay Zambad |
last post by:
Hi,
i am able to connect internet explorer using Excel macro but not getting that how to connect the options like (Upload, Brows, insert) into IE using macro.
Regards,
Ajay
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
| |
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |