Hi,
We're using ClickOnce alreaddy more than a year for a given applicaiton,
doing more than 50 publishes without any problem.
Yesterday we made a minor change to one of our components (let's say with
the name MyAssembly), and incremented it's version (AssemblyVersio n: from
0.1.7.0 to 0.1.7.1). We did the Publish with ClickOnce, but when the users
know want to run the application they get this error:
"Unable to install or run the application. The application requires that
assembly MyAssembly Version 0.1.7.0
be installed in the Global Assembly Cache (GAC) first."
This is so weird, especially when knowing we had alreaddy inremented this
version number without any problems in the past.
Anybody has any idea? Your help will be really appreciated!
Thanks a lot in advance,
Pieter 2 1656
Aaargh never mind, I've found it:
What was actually happening was soem type of dll hell :-)
Another component in the project was referencing the same assembly, but did
it with a compiled version, not the source of the project. so when doing the
publish there was some conflict between the old one and the new one...
This conflict should be more visible in the output window when doing a build
:-)
"Pieter" <pi************ ****@hotmail.co mwrote in message
news:%2******** **********@TK2M SFTNGP04.phx.gb l...
Hi,
We're using ClickOnce alreaddy more than a year for a given applicaiton,
doing more than 50 publishes without any problem.
Yesterday we made a minor change to one of our components (let's say with
the name MyAssembly), and incremented it's version (AssemblyVersio n: from
0.1.7.0 to 0.1.7.1). We did the Publish with ClickOnce, but when the users
know want to run the application they get this error:
"Unable to install or run the application. The application requires that
assembly MyAssembly Version 0.1.7.0
be installed in the Global Assembly Cache (GAC) first."
This is so weird, especially when knowing we had alreaddy inremented this
version number without any problems in the past.
Anybody has any idea? Your help will be really appreciated!
Thanks a lot in advance,
Pieter
On Jun 17, 12:15*pm, "Pieter" <pieterNOSPAMco u...@hotmail.co mwrote:
Aaargh never mind, I've found it:
What was actually happening was soem type of dll hell :-)
Another component in the project was referencing the same assembly, but did
it with a compiled version, not the source of the project. so when doing the
publish there was some conflict between the old one and the new one...
This conflict should be more visible in the output window when doing a build
:-)
"Pieter" <pieterNOSPAMco u...@hotmail.co mwrote in message
news:%2******** **********@TK2M SFTNGP04.phx.gb l...
Hi,
We're using ClickOnce alreaddy more than a year for a given applicaiton,
doing more than 50 publishes without any problem.
Yesterday we made a minor change to one of our components (let's say with
the name MyAssembly), and incremented it's version (AssemblyVersio n: from
0.1.7.0 to 0.1.7.1). We did the Publish with ClickOnce, but when the users
know want to run the application they get this error:
"Unable to install or run the application. The application requires that
assembly MyAssembly Version 0.1.7.0
be installed in the Global Assembly Cache (GAC) first."
This is so weird, especially when knowing we had alreaddy inremented this
version number without any problems in the past.
Anybody has any idea? Your help will be really appreciated!
Thanks a lot in advance,
Pieter- Hide quoted text -
- Show quoted text -
Hi,
If you need to play with GAC manually, you can also refer to this
article: http://support.microsoft.com/kb/315682
Thanks,
Onur Güzel This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Chango V. |
last post by:
Hello,
We seem to need a PIA for MSXML 4. According to the documentation, only the
original publisher of a COM type library is supposed to create a .NET PIA.
As far as I know, Microsoft hasn't done that yet. Our problem is that we
very much want to create a PIA for a COM component of ours, but TlbImp.exe
/primary insists that all referenced dependencies be PIAs as well. Our
component has a type library reference to MSXML 4, hence the...
|
by: Reinhold Schalk |
last post by:
Hello,
somewhere i've read that using strong names does assure two things:
1. Assure that the content of the assembly is not modified (that's ok in my
opinion)
2. Assure that the assembly is really from the "fabricator" (?)
If these two point are correct (i'm not sure), i have a problem with point
2.
To assure the authentity of the fabricator, the public key (which is a part
of the manifest) has to be checked against a certificate.
|
by: EAI |
last post by:
Is there a way to Install/UnInstall an assembly to GAC?
Thanks!
|
by: ewolfman |
last post by:
Hi,
I've read many posts in several news groups, but can't figure out how
to publish my website. The specific error I'm getting (on the
"successfully published website") is "Could not load the assembly
'App_Web_vxfyglsm'. Make sure that it is compiled before accessing the
page".
I checked - The assembly DOES exist in the target web folder.
|
by: MarkAurit |
last post by:
In vs.net 2005 web apps, now that we no longer have the assemblyinfo file,
how do we set assembly information (such as version,description,company, etc)?
Thanks, Mark
| |
by: Andrew |
last post by:
In ASP.NET 1.1 I used to retreive the version of my code-behind assembly
using following syntax:
Assembly.GetExecutingAssembly().GetName().Version
The version was defined in AssemblyInfo.cs using
After migrating to ASP.NET 2.0 this line of code always return 0.0.0.0. How
do I retreive the assembly version of ASP.NET application?
Thanks
|
by: sklett |
last post by:
From the project designer when I click on the "Application Files" on the
"Publish" tab there are some missing assemblies that are required. I can't
find a way to explicitly specify a required assembly, is this possible? I
don't know WHY VS2005 thinks the assembly in question is not required, but
it does.
Any help would be greatly appreciated.
Thanks,
Steve
|
by: Rainer Queck |
last post by:
Hello NG,
I realized, that my application won't start, if a referenced assembly is
missing.
Basically this is understandable, but since I destribute my applictaion
without a setup, it can happen that I forget one or the other .dll.
Since my app depends on a whole bunch of .dll it would be great, if the app
could tell me which assemblies are missing instead of not starting at all.
|
by: Pieter |
last post by:
Hi,
We're using ClickOnce alreaddy more than a year for a given applicaiton,
doing more than 50 publishes without any problem.
Yesterday we made a minor change to one of our components (let's say with
the name MyAssembly), and incremented it's version (AssemblyVersion: from
0.1.7.0 to 0.1.7.1). We did the Publish with ClickOnce, but when the users
know want to run the application they get this error:
"Unable to install or run the...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |