i just downloaded and installed the directx aug 2006 sdk
the machine i installed it on had both vs2003 & vs2005
the visual studio extensions were installed into vs2003 but not into vs2005.
does the directx sdk not integrate with vs2005 ?
are we essentially forced to develop directx apps using vs2003 & .net 1.1 in
order to take advantage of the vs extensions ?
the docs make no mention of vs2005 or .net 2.0 - but then again while the vs
help lists the directx help as Augist 2006, the help itself says that it is
August 2005 ?
is this a problem with vs2003 being installed on the machine and taking
precedence over vs2005 or is directx really that far behind the times ?
Assuming that I have just missed a piece of the puzzle, is there any
documentation dealing with installing and using the directx sdk with
vs2005/.net 2.0 ?
Gerry 10 1649
Gerry
Documentation is hopefully not the best part of the DirectX team.
I would just try it in your case.
Cor
"gerry" <ge**@nospam.no spamschreef in bericht
news:un******** *****@TK2MSFTNG P03.phx.gbl...
>i just downloaded and installed the directx aug 2006 sdk
the machine i installed it on had both vs2003 & vs2005
the visual studio extensions were installed into vs2003 but not into
vs2005.
does the directx sdk not integrate with vs2005 ?
are we essentially forced to develop directx apps using vs2003 & .net 1.1
in
order to take advantage of the vs extensions ?
the docs make no mention of vs2005 or .net 2.0 - but then again while the
vs
help lists the directx help as Augist 2006, the help itself says that it
is
August 2005 ?
is this a problem with vs2003 being installed on the machine and taking
precedence over vs2005 or is directx really that far behind the times ?
Assuming that I have just missed a piece of the puzzle, is there any
documentation dealing with installing and using the directx sdk with
vs2005/.net 2.0 ?
Gerry
If I remember, I previously saw that they mention 1.1 assemblies are
compatible with VS 2005 but not sure if it includes vs extensions support.
IMO they didn't spend much time on this as 2.0 assemblies will be finally
available as part of the new XNA framework and tools that should be heavily
integrated with VS.NET.
--
Patrice
"gerry" <ge**@nospam.no spama écrit dans le message de news:
un************* @TK2MSFTNGP03.p hx.gbl...
>i just downloaded and installed the directx aug 2006 sdk
the machine i installed it on had both vs2003 & vs2005
the visual studio extensions were installed into vs2003 but not into
vs2005.
does the directx sdk not integrate with vs2005 ?
are we essentially forced to develop directx apps using vs2003 & .net 1.1
in
order to take advantage of the vs extensions ?
the docs make no mention of vs2005 or .net 2.0 - but then again while the
vs
help lists the directx help as Augist 2006, the help itself says that it
is
August 2005 ?
is this a problem with vs2003 being installed on the machine and taking
precedence over vs2005 or is directx really that far behind the times ?
Assuming that I have just missed a piece of the puzzle, is there any
documentation dealing with installing and using the directx sdk with
vs2005/.net 2.0 ?
Gerry
Hi Gerry,
I have April build DirectX SDK installed on my test machine which is
properly integrated with both VS.NET2003 and VS.NET 2005.
I will upgrade to the new August version this weekend and see if I can
repro the problem you met.
Thanks.
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to: http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at: http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.
Thanks wen
do you know if installing the april build will integrate with both versions
of vs if they are installed on the same machine, or just the 1st one that it
finds ?
Gerry
""WenJun Zhang[msft]"" <wj*****@online .microsoft.comw rote in message
news:3I******** ********@TK2MSF TNGXA01.phx.gbl ...
Hi Gerry,
I have April build DirectX SDK installed on my test machine which is
properly integrated with both VS.NET2003 and VS.NET 2005.
I will upgrade to the new August version this weekend and see if I can
repro the problem you met.
Thanks.
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to: http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at:
http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.
>
try what ?
i installed the august release and it installed the extensions into vs2003
and appears to have completely ignored vs2005 altogether.
"Cor Ligthert [MVP]" <no************ @planet.nlwrote in message
news:uN******** *****@TK2MSFTNG P02.phx.gbl...
Gerry
Documentation is hopefully not the best part of the DirectX team.
I would just try it in your case.
Cor
"gerry" <ge**@nospam.no spamschreef in bericht
news:un******** *****@TK2MSFTNG P03.phx.gbl...
i just downloaded and installed the directx aug 2006 sdk
the machine i installed it on had both vs2003 & vs2005
the visual studio extensions were installed into vs2003 but not into
vs2005.
does the directx sdk not integrate with vs2005 ?
are we essentially forced to develop directx apps using vs2003 & .net
1.1
in
order to take advantage of the vs extensions ?
the docs make no mention of vs2005 or .net 2.0 - but then again while
the
vs
help lists the directx help as Augist 2006, the help itself says that it
is
August 2005 ?
is this a problem with vs2003 being installed on the machine and taking
precedence over vs2005 or is directx really that far behind the times ?
Assuming that I have just missed a piece of the puzzle, is there any
documentation dealing with installing and using the directx sdk with
vs2005/.net 2.0 ?
Gerry
Hi Gerry,
Yes, the April version integrate with both VS2005 and VS2003 well on my
test machine.
I installed the August version and saw the Debugging extension on VS2005 is
no longer available. Is this just your problem? Please check out the
following comments in Readme:
Shader Debugging in Visual Studio 2005
In the August 2006 SDK, the shader debugging functionality of the DirectX
Extensions for Visual Studio? does not work with Visual Studio 2005.
(Syntax highlighting continues to work with Visual Studio 2005.)
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to: http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at: http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no rights.
I have installed DirectX aug yesterday.
I could run a C# sample in that in Visual Studio 2005.
Cor
""WenJun Zhang[msft]"" <wj*****@online .microsoft.coms chreef in bericht
news:nl******** ******@TK2MSFTN GXA01.phx.gbl.. .
Hi Gerry,
Yes, the April version integrate with both VS2005 and VS2003 well on my
test machine.
I installed the August version and saw the Debugging extension on VS2005
is
no longer available. Is this just your problem? Please check out the
following comments in Readme:
Shader Debugging in Visual Studio 2005
In the August 2006 SDK, the shader debugging functionality of the DirectX
Extensions for Visual Studio? does not work with Visual Studio 2005.
(Syntax highlighting continues to work with Visual Studio 2005.)
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to: http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach the
most efficient resolution. The offering is not appropriate for situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are best
handled working with a dedicated Microsoft Support Engineer by contacting
Microsoft Customer Support Services (CSS) at:
http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.
dx seems to work just fine with vs2005.
I guess that I was expecting to see something changed in the ide since the
install warns me that my tool bars will all be reset when the dx extensions
are installed into vs.
looking at vs2003 I can't say that I actually see any sign of anything
having changed there either other than directx being listed in the installed
products in the about dialog.
so after all that - what then exactly are the directx vs extensions ? just
the managed dll's ?
"Cor Ligthert [MVP]" <no************ @planet.nlwrote in message
news:OK******** ******@TK2MSFTN GP03.phx.gbl...
I have installed DirectX aug yesterday.
I could run a C# sample in that in Visual Studio 2005.
Cor
""WenJun Zhang[msft]"" <wj*****@online .microsoft.coms chreef in bericht
news:nl******** ******@TK2MSFTN GXA01.phx.gbl.. .
Hi Gerry,
Yes, the April version integrate with both VS2005 and VS2003 well on my
test machine.
I installed the August version and saw the Debugging extension on VS2005
is
no longer available. Is this just your problem? Please check out the
following comments in Readme:
Shader Debugging in Visual Studio 2005
In the August 2006 SDK, the shader debugging functionality of the
DirectX
Extensions for Visual Studio? does not work with Visual Studio 2005.
(Syntax highlighting continues to work with Visual Studio 2005.)
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to:
http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent
issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each
follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach
the
most efficient resolution. The offering is not appropriate for
situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are
best
handled working with a dedicated Microsoft Support Engineer by
contacting
Microsoft Customer Support Services (CSS) at: http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights.
No these are extensions allowing to debug shaders (and perhaps more).
Try for example http://msdn.microsoft.com/archive/de...erDebugger.asp
--
Patrice
"gerry" <ge**@nospam.no spama écrit dans le message de news:
uc************* *@TK2MSFTNGP05. phx.gbl...
dx seems to work just fine with vs2005.
I guess that I was expecting to see something changed in the ide since the
install warns me that my tool bars will all be reset when the dx
extensions
are installed into vs.
looking at vs2003 I can't say that I actually see any sign of anything
having changed there either other than directx being listed in the
installed
products in the about dialog.
so after all that - what then exactly are the directx vs extensions ?
just
the managed dll's ?
"Cor Ligthert [MVP]" <no************ @planet.nlwrote in message
news:OK******** ******@TK2MSFTN GP03.phx.gbl...
>I have installed DirectX aug yesterday.
I could run a C# sample in that in Visual Studio 2005.
Cor
""WenJun Zhang[msft]"" <wj*****@online .microsoft.coms chreef in bericht news:nl******* *******@TK2MSFT NGXA01.phx.gbl. ..
Hi Gerry,
Yes, the April version integrate with both VS2005 and VS2003 well on my
test machine.
I installed the August version and saw the Debugging extension on
VS2005
is
no longer available. Is this just your problem? Please check out the
following comments in Readme:
Shader Debugging in Visual Studio 2005
In the August 2006 SDK, the shader debugging functionality of the
DirectX
Extensions for Visual Studio? does not work with Visual Studio 2005.
(Syntax highlighting continues to work with Visual Studio 2005.)
Sincerely,
WenJun Zhang
Microsoft Online Community Support
=============== =============== =============== =====
Get notification to my posts through email? Please refer to: http://msdn.microsoft.com/subscripti...ult.aspx#notif
ications.
Note: The MSDN Managed Newsgroup support offering is for non-urgent
issues
where an initial response from the community or a Microsoft Support
Engineer within 1 business day is acceptable. Please note that each
follow
up response may take approximately 2 business days as the support
professional working with you may need further investigation to reach
the
most efficient resolution. The offering is not appropriate for
situations
that require urgent, real-time or phone-based interactions or complex
project analysis and dump analysis issues. Issues of this nature are
best
handled working with a dedicated Microsoft Support Engineer by
contacting
Microsoft Customer Support Services (CSS) at:
http://msdn.microsoft.com/subscripti...t/default.aspx.
=============== =============== =============== =====
This posting is provided "AS IS" with no warranties, and confers no
rights. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: poldoj |
last post by:
Hi all ( and happy new year of course)
I just would like to learn how to use directx in my VB.net project. Simple
stuff, Im only a newbie, someone can point me out a link for tutorials?
Thanks
|
by: Jessica Weiner |
last post by:
I am writing an application in C# which need to plot graphs and simple
shapes (polygons, circles, squares etc). Which library is better for this
purpose and why? Thanks.
|
by: Michael Hudson |
last post by:
The next PyPy sprint will happen in the nice city of
Limerick in Ireland from 21st till 27th August.
(Most people intend to arrive 20th August).
The main focus of the sprint will be on JIT compiler works,
various optimization works, porting extension modules,
infrastructure works like a build tool for PyPy, or
extended (distributed) testing.
It's also open to new topics. If you are a student
|
by: Betty Harvey |
last post by:
The next meeting of the XML Users Group will be held on Wednesday,
August 16, 2006 at the American Geophysical Union (AGU) at 2000
Florida Avenue, N.W., Washington, DC 20009-1277. The meeting starts
at 7:00 p.m. and usually last approximately 2 hours. If attending
the meeting by Metro, get off the Dupont Circle stop and walk
north to Florida Avenue...turn right.
There is no cost associated with attending but if you are planning on...
|
by: soatutorial |
last post by:
Microsoft Dynamics CRM 3.0 Implementation For Large Corporation (August
2006)
How Microsoft CRM 3.0 could contribute and be a part of its computer
environment.
(Sales Module, MS CRM Security, Integration with Microsoft Dynamics GP
9.0/Microsoft Great Plains,Integration with IBM Lotus Notes Domino
,International Considerations, Competition)
http://microsoft-crm-3.blogspot.com/2006/08/microsoft-dynamics-crm-30.html
| |
by: Edward Mitchell |
last post by:
I am converting a project that uses DirectX and worked under VS.NET 2003.
Now when I convert the project to .NET 2005, there are linker errors for
_Xran and _Xlen as follows:
dx9.lib(WinConsole.obj) : error LNK2019: unresolved external symbol "public:
void __thiscall std::_String_base::_Xran(void)const " ...
....
dx9.lib(WinConsole.obj) : error LNK2019: unresolved external symbol "public:
void __thiscall...
|
by: Robert Hooker |
last post by:
Does anyone have any information on when MDX2.0 will come out of Beta? It
seems like its been in Beta for a looong time...
Rob
|
by: Jack Nielsen |
last post by:
Does anyone have a link to Visual Studio 2005 directcx 2d sprite
manipulation or just simple graphics with directx 2d.
Jack
--------------------------------------------------------------------------------
Jeg beskyttes af den gratis SPAMfighter til privatbrugere.
Den har indtil videre sparet mig for at få 17573 spam-mails
Betalende brugere får ikke denne besked i deres e-mails.
Hent en gratis SPAMfighter her.
|
by: =?Utf-8?B?anVhbm1pZ3VlbA==?= |
last post by:
Hello, I'm trying to get started with directx on VB .NET. I downloaded the
managed directx 9.0 sdk and installed it but I cannot add microsoft.directx
or any of its components as a project reference on visual studio 2003.
I searched for installation guides and on this guide here:
http://blogs.msdn.com/coding4fun/archive/2006/11/02/938703.aspx
It says it should install 9 xml files and 9 dll files on
C:\WINDOWS\Microsoft.NET\Managed...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |