473,748 Members | 10,889 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

2nd request...Urgen t help needed: problem upgrading ASP.NET application 1.0 to 1.1

Hi,

I have seen reference to this problem several times in various newsgroups.
The problem is in opening an ASP.NET web application created using Visual
Studio 2002 (.NET 1.0) in Visual Studio 2003 (.NET 1.1). I am at my wits end
with this problem!!!

I have run the aspnet_regiis -i command, and successfully (or so the command
says) upgraded all scrips for all the ASP.NET projects on my machine to 1.1.
When I check the Configuration/App Mappings they all reference the 1.1 ISAPI
dll as expected. However, one particular project will not load in VS 2003, I
continually get the 'detected that webserver is running 1.0 - please
upgrade' message, and the project will not load.

I would recreate the project from scratch, but it is complex, with
SourceSafe shares to other projects, etc. So I would rather not have to do
this.

Can anyone please tell me why IIS still thinks this project is 1.0?

Thanks, in anticipation.

Chris

Jul 19 '05 #1
0 1351

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

8
10648
by: turnit \(removethis\) | last post by:
I have a login form that uses the post method to carry the information to the next page. The form works just fine in ie6.0, but fails in mozilla and fails in ie5.2 on a mac. "HTTP/1.1 400 Bad Request" was the original error msg now that I reinstalled iislockdown and urscan I get "The parameter is incorrect." If I use the get method with this form it works just fine on everything. I can't say for certain but I think this problem started...
1
2516
by: Jenny | last post by:
Need urgent help for an unsolved problem. In our ASP web application, we creat a Back button and if user click on this button, it execute history.go(-1) to go back to the previous page. All our users use IE 6.0 and most of them don't have problem with this button. But one user reported everytime he click on this button, there is a pop-up window shows up and ask him refresh and reload the page, after he clicks OK, the previous page will be...
0
915
by: chrislewis | last post by:
Hi, I have seen reference to this problem several times in various newsgroups. The problem is in opening an ASP.NET web application created using Visual Studio 2002 (.NET 1.0) in Visual Studio 2003 (.NET 1.1). I am at my wits end with this problem!!! I have run the aspnet_regiis -i command, and successfully (or so the command says) upgraded all scrips for all the ASP.NET projects on my machine to 1.1. When I check the...
0
241
by: chrislewis | last post by:
Hi, I have seen reference to this problem several times in various newsgroups. The problem is in opening an ASP.NET web application created using Visual Studio 2002 (.NET 1.0) in Visual Studio 2003 (.NET 1.1). I am at my wits end with this problem!!! I have run the aspnet_regiis -i command, and successfully (or so the command says) upgraded all scrips for all the ASP.NET projects on my machine to 1.1. When I check the...
1
1416
by: kaliem | last post by:
Hi, I am emailing on this forum in emergency. I need a PERL programmer who can work for 1 -2 days on a ' Website Upgrading project' . Most of this upgrading include simple changes and one or two of them might require some time to complete. I guess if you are a proficient coder in PERL and Tomahawk, You can do it in few hours otherwise 1-3 days would be enough. I have decent budget for this project but I need it done in next week. If interested,...
5
1467
by: Aykut Canturk | last post by:
Dear friends, I recently decided to move vb.net 2005 from vb6. my projects has average of 200 forms and 20 modules. I mostly write enterprise solution about production automation like applications. In VB6 it takes 15 to 20 second to open a project and almost less than 2 second to see the form after I click to project explorer. Compiling to EXE file takes rather long time, about 45 seconds to 1 minute. But in VB.net, to open a project...
2
2434
by: Preetam Pattanashetty | last post by:
Hi I am learning ASP.NET using C#. I am able to run .aspx files on local system, but when I load them to the server, I get the "Server Error in '/' Application" error. I have tried to configure the web.config file but has not been fruitful. I would be thankful if the following questions were answered: a)has the write permissions on files and folders have to do something with it? b)what role does asp_client folder play? c) What other...
0
1017
by: Nehad9 | last post by:
Hi, I am moving an existing ASP application from Win 2k3, IIS 6.0 to a new Win2k3 IIS 6.0 but the same pice of code that works on the old machine give a "blank" page on new machine. On debugging, I found out that none of the request values are being passed. The whole application works on request values and changing the code would not be possible. any help would be highly appreciated since this is an urgent request. Thanks Neha
5
1831
by: Rory Becker | last post by:
I have had code in my Application_Start which is intended to run once at the start of my application's life. It loads connection information and similar from a known location. However I recently migrated my app using ------------------------------------------------------------- %systemroot%\system32\inetsrv\APPCMD.EXE migrate config "Default Web Site/YourApp" -------------------------------------------------------------
0
8830
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9541
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9370
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
9321
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
0
6074
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4602
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
1
3312
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
2782
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.
3
2215
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.