MTS transactions problems against Oracle 9iR2 with vb.Net

Rick

I'm having problems with EnterpriseServi ces transactions running
against Oracle 9iR2.

I am inconsistently getting Oracle ORA-24761: Transaction Rolled Back
results mid-transaction. If I start the transaction and run it against
an object it might fail. If I rerun the same transaction again it
might work. But on trying again it might fail.

If I disable transactions <Transaction(Tr ansactionOption .Disabled)>
the app runs and all the data is processed correctly. I have confirmed
that the basic selects, inserts and updates all run successfully
without transactions.

I have a small test app I used to confirm that all the components are
setup to run transactions; I can test failure and commit on success
and that works. But when running the full application I am developing
it is just plain inconsistent.

Environment:

WinXPPro
VS.Net 2003
Oracle 9iR2 patched to 9.2.0.4 plus OraMTS configured.
Oracle version of the DAAB patched to fix output parameter problems
Questions:

1. Is anyone else out there running this configuration successfully?
2. Is anyone else running a configuration near to this?
3. Any suggestions on where to look within the oracle world to
determine the root cause of the transaction rollback that Oracle is
issuing?
4. Anyone experiencing problems running transactions in Debug mode vs
Release?

Thanks for the help
Rick

Jul 21 '05 #1

Subscribe Reply

4202

Paul Clement

On 29 Oct 2003 11:35:14 -0800, rk*******@earth link.net (Rick) wrote:

¤ I'm having problems with EnterpriseServi ces transactions running
¤ against Oracle 9iR2.
¤
¤ I am inconsistently getting Oracle ORA-24761: Transaction Rolled Back
¤ results mid-transaction. If I start the transaction and run it against
¤ an object it might fail. If I rerun the same transaction again it
¤ might work. But on trying again it might fail.
¤
¤ If I disable transactions <Transaction(Tr ansactionOption .Disabled)>
¤ the app runs and all the data is processed correctly. I have confirmed
¤ that the basic selects, inserts and updates all run successfully
¤ without transactions.
¤
¤ I have a small test app I used to confirm that all the components are
¤ setup to run transactions; I can test failure and commit on success
¤ and that works. But when running the full application I am developing
¤ it is just plain inconsistent.
¤
¤ Environment:
¤
¤ WinXPPro
¤ VS.Net 2003
¤ Oracle 9iR2 patched to 9.2.0.4 plus OraMTS configured.
¤ Oracle version of the DAAB patched to fix output parameter problems
¤
¤
¤ Questions:
¤
¤ 1. Is anyone else out there running this configuration successfully?
¤ 2. Is anyone else running a configuration near to this?
¤ 3. Any suggestions on where to look within the oracle world to
¤ determine the root cause of the transaction rollback that Oracle is
¤ issuing?
¤ 4. Anyone experiencing problems running transactions in Debug mode vs
¤ Release?

You might want to check the Oracle MetaLink site (you will probably need to create an account). I
found a couple of articles that refer to the error you are getting but don't know whether they
apply. I assume you are using Oracle's .NET provider since you are using their middleware.

http://metalink.oracle.com/metalink/...l2_gui.startup
Paul ~~~ pc******@amerit ech.net
Microsoft MVP (Visual Basic)

Jul 21 '05 #2

Similar topics

2686

Character conversion between oracle and php?

by: Kamal | last post by:

PHP 4.3.4 on Apache 2.0.48 on Linux Red Hat 8.0 Kernel 2.4.18-14smp with Oracle 9iR2. I have this code: <html> <body> <?php

PHP

13237

Oracle install and Java problems

by: Skeleton Man | last post by:

Hi, Upon installing Oracle 9i (9.2.0.1.0) on a Debian box, the whole install process completes, but when I get to the very end and it trys to setup configuration assistants, all three fail with the following error: "jre was not found in /ora/9iR2/oracle.swd.jre/bin/i386/native_threads/jre" I have tried symlinking the i386 and i686 directories as has been suggested from a search of forums..

Oracle Database

4157

how to install oracle 9iR2 on windows 2003?

by: pcman | last post by:

Dear all, How to install Oracle 9iR2 on Windows 2003 or Windows 2000? Pls help me! Thanks!

Oracle Database

8219

Distributed transactions and Oracle RAC load balancing problems - advice needed!

by: Eirik Tryggeseth | last post by:

During deployment of an application using distributed transactions managed under COM+ on an Oracle 9i RAC database, we encounter situations where the load balancing mechanisms in the RAC result in that the component context in the distributed transaction (in our case two different COM components) cannot hold onto the same ODBC connection. Or it may be that the database session is changed dynamically for the ODBC connection, so that...

Oracle Database

125

15510

Comparison of DB2 and Oracle?

by: Rhino | last post by:

One of my friends, Scott, is a consultant who doesn't currently have newsgroup access so I am asking these questions for him. I'll be telling him how to monitor the answers via Google Newsgroup searches. Scott has heard a lot of hype about DB2 and Oracle and is trying to understand the pros and cons of each product. I'm quite familiar with DB2 but have never used Oracle so I can't make any meaningful comparisons for him. He does not have...

Oracle Database

2382

Seeking Testing Volunteers W2K MTS/DTC to VMS DECdtm Distributed 2PC Transactions

by: Richard Maher | last post by:

Hi, I am seeking the help of volunteers to test some software that I've developed which facilitates distributed two-phase commit transactions, encompassing any resource manager (e.g. SQL/Server or Oracle) controlled by Microsoft's Distributed Transaction Coordinator in a Windows2000 environment, with any resource manager under the control of DECdtm (e.g. Rdb (or Oracle via the XA Veneer)) in a VMS environment.

Microsoft SQL Server

1930

Oracle 9i XML schema modification

by: John | last post by:

I realize this may be too Oracle specific for this forum-- but I've seen a fair amount of postings related to ORacle 9i's XML capabilites so I thought I'd give it a shot. So, I've read in Oracle's documentatino for 9iR2 that if you want to store schema based XML documents in Oracle, you first have to register the schema. The problem is that if you want to modify the schema, and then subsequently re-register it Oracle will force you to...

.NET Framework

12999

C# transactions v SQL transactions

by: Mike P | last post by:

I've been using C# transactions for a while and had no problems with them. Using try catch blocks I can trap basically all possible errors and rollback all necessary data. Over the last few days I've been trying to convert some of this code to SQL Server stored procedures, but it seems to lack many of the benefits of C# transactions - a lot of the errors don't seem to be trapped by the SQL error trapping (e.g. if I do an update on a row...

C# / C Sharp

496

MTS transactions problems against Oracle 9iR2 with vb.Net

by: Rick | last post by:

.NET Framework

9589

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

9999

The easy way to turn off automatic updates for Windows 10/11

by: Hystou | last post by:

Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...

Windows Server

9866

Discussion: How does Zigbee compare with other wireless protocols in smart home applications?

by: tracyyun | last post by:

Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...

General

7413

Access Europe - Using VBA to create a class based on a table - Wed 1 May

by: isladogs | last post by:

The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...

Microsoft Access / VBA

5310

Trying to create a lan-to-lan vpn between two differents networks

by: TSSRALBI | last post by:

Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...

Networking - Hardware / Configuration

5448

Windows Forms - .Net 8.0

by: adsilva | last post by:

A Windows Forms form does not have the event Unload, like VB6. What one acts like?

Visual Basic .NET

3967

transfer the data from one system to another through ip address

by: 6302768590 | last post by:

Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

C# / C Sharp

3570

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP

2815

Comprehensive Guide to Website Development in Toronto: Expert Insights from BSMN Consultancy

by: bsmnconsultancy | last post by:

In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

General