The designer could not be shown for this file

Manmohan Gupta

VS.Net 2003
Win2k Terminal Server SP4

When a create a new ASP.Net web service and try to open
the web service code behind class in the designer by
double clicking in Solution Explorer, I get this task item:

The designer could not be shown for this file because none
of the classes within it can be designed.

This does not always happen but I can't seem to figure out
how to workaround this problem. Please help.

Thanks

Nov 16 '05 #1

Subscribe Reply

2815

Tian Min Huang

Hello Manmohan,

Thanks for your post. As I understand, the problem you are facing is that
you fail to view code of a web service. Please correct me if there is any
misunderstandin g. I did some research, however, I did not find any known
issue of this problem. I think more information is needed before moving
forward:

1. Does this problem occurs to all projects or a specific project? I
recommend you create a new web service project and see if it works.

2. Please right-click the design view of web service, select "View Code"
and check it is able to reproduce the problem.

3. I suggest that you can restart the system into Windows 2000 Safe-Mode
and see if the problem still occurs.

I look forward to hearing from you.

Have a nice day!

BTW, in the future, it would be best to post these questions in the
following newsgroup.
Microsoft.publi c.vsnet.ide

Regards,

HuangTM
Microsoft Online Partner Support
MCSE/MCSD

Get Secure! ¨C www.microsoft.com/security
This posting is provided ¡°as is¡± with no warranties and confers no rights.

Nov 16 '05 #2

Manmohan Gupta

Hi,

The problem is that I fail to open a VC WebService in the
designer using VS.Net 2003. It does not happen always so
it is an intermittent problem. I can build the web service
and run it without problems. It also starts to load
correctly after I quit devenv and restart it and then
reload the project.

-----Original Message-----
Hello Manmohan,

Thanks for your post. As I understand, the problem you are facing is that you fail to view code of a web service. Please correct me if there is any misunderstandi ng. I did some research, however, I did not find any known issue of this problem. I think more information is needed before moving forward:

1. Does this problem occurs to all projects or a specific project? I recommend you create a new web service project and see if it works.
2. Please right-click the design view of web service, select "View Code" and check it is able to reproduce the problem.

3. I suggest that you can restart the system into Windows 2000 Safe-Mode and see if the problem still occurs.

I look forward to hearing from you.

Have a nice day!

BTW, in the future, it would be best to post these questions in the following newsgroup.
Microsoft.publ ic.vsnet.ide

Regards,

HuangTM
Microsoft Online Partner Support
MCSE/MCSD

Get Secure! ¨C www.microsoft.com/security
This posting is provided ¡°as is¡± with no warranties and confers no rights.

.

Nov 16 '05 #3

Tian Min Huang

Hi Manmohan,

Thanks for your information. After further investigation, however, I did
find any related issue and I am not able to reproduce the problem on my
side.

Since this an intermittent problem, I suspect that it may be caused by some
third-pary applications or services (say, Anti-Virus). If you have any
anti-virus application installed, I suggest that you can disable its
realtime monitor functionality (and stop/close unnecessary service/app) to
check whether the problem still exists.

I am standing by for your response.

Have a nice day!
Regards,

HuangTM
Microsoft Online Partner Support
MCSE/MCSD

Get Secure! ¨C www.microsoft.com/security
This posting is provided ¡°as is¡± with no warranties and confers no rights.

Nov 16 '05 #4

Similar topics

2661

Designer Support when Inheriting from a Base Page Class

by: thechaosengine | last post by:

Hi all, I wanted to put some common security functions into a class that inherits from the Page class and then use the new class as the basis for all my pages. Unfortunately, if I try and inherit from my new SecurePage class and not the old Page class, the designer breaks and will only allow me into html mode. Bugger. The error message given is:

.NET Framework

1788

Designer: mysterious behavior with form constructers and static methods

by: Sebastian Bargmann | last post by:

Hi, I've run into a weird problem with the form designer. I have three classes: a messagebox class and two forms (Base and Derived which is derived from Base): (note: only relevant code below)

C# / C Sharp

1867

The designer could not be shown for this file... (Smart Device development)

by: Johann Blake | last post by:

I installed "Visual Studio.NET 2003 Special Upgrade for Version 2002 customers". At the time of this posting, this is the latest version available. When I go to create a Smart Device application using C#, the IDE shows the designer window with the error message: "The designer could not be shown for this file because none of the classes within it can be designed."

ASP.NET

1331

Upgrade To 2003: Cannot Load Web Forms Designer; Using Page Descendent

by: L Scott | last post by:

I've created a page ancestry (framework) for our application so that all pages in our app would have the same look and feel. To do this, I created several user controls (header, footer, menu, etc.) and then a C# class which inherits from System.Web.UI.Page. In the OnInit() method of this class, I dynamically load these user controls using the 'this.Controls.AddAt()' method (as well as call the base.OnInit() method to load the objects from...

ASP.NET

4672

The file could not be loaded into the Web Forms designer

by: crusell | last post by:

I'm having some problem with my Visual Studio.NET 2003 (.NET 1.1 SP1) install. I am unable to use the web forms designer with any aspx file whose form class inherits from a base class. I'm implementing the page controller design pattern and everything has been working fine until now. My form inherits from a base class called CampusNET.CampusPage. The class exists, is included in the project and compiles just fine. If I replace the base...

ASP.NET

4679

Designer doesn't work after overriding base class

by: dusanv | last post by:

Hi, I have a class (say O1) that overrides System::Windows::Forms::UserControl and then another one that overrides O1 (call it O2). O2 used to work with the Designer as it was inheriting directly from UserControl (and was created using the wizard) but since I inserted O1 into inheritance tree (without resx, straight override) I get the error pasted at the bottom when trying to open O2 in Designer. I deleted the NCB file to no avail....

.NET Framework

3414

file could not be loaded into the web forms designer -- error

by: Carlo3030 | last post by:

Hi, My project's original code works as expected, the problem is after we had added our project to our sourcesafe, my teammate got the latest version and all the pages could not be viewed in the designer. I'm using vsual Studio 2003. below is the exact error: the file could not be loaded into the Web Forms designer. Please Correct the

C# / C Sharp

5242

Windows Form Designer generated code

by: cj | last post by:

In a project done in 2003 about a year ago I was told to add the SocketWrench code below into the Windows Form Designer generated code area as shown below. #Region " Windows Form Designer generated code " Public Sub New() MyBase.New() 'This call is required by the Windows Form Designer.

Visual Basic .NET

8143

Visual Studio isn't generating the Code Gen file (*.designer.vb)

by: Nathan Sokalski | last post by:

I am an ASP.NET developer, and Visual Studio 2005 seems to have stopped declaring the controls that I add in the *.designer.vb files, therefore forcing me to manually add them before I can use them in code that I write in the *.aspx.vb and *.ascx.vb files. Why is it no longer automatically declaring the controls? Is there a way to manually force Visual Studio 2005 to regenerate these files? Is there a setting somewhere that could have...

ASP.NET

8483

What is ONU?

by: marktang | last post by:

ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...

General

8676

Discussion: How does Zigbee compare with other wireless protocols in smart home applications?

by: tracyyun | last post by:

Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...

General

7445

AI Job Threat for Devs

by: agi2029 | last post by:

Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own.... Now, this would greatly impact the work of software developers. The idea...

Career Advice

6237

Access Europe - Using VBA to create a class based on a table - Wed 1 May

by: isladogs | last post by:

The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...

Microsoft Access / VBA

5703

Couldn’t get equations in html when convert word .docx file to html file in C#.

by: conductexam | last post by:

I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...

C# / C Sharp

4416

Windows Forms - .Net 8.0

by: adsilva | last post by:

A Windows Forms form does not have the event Unload, like VB6. What one acts like?

Visual Basic .NET

2819

transfer the data from one system to another through ip address

by: 6302768590 | last post by:

Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system

C# / C Sharp

2062

How to add payments to a PHP MySQL app.

by: muto222 | last post by:

How can i add a mobile payment intergratation into php mysql website.

PHP

1816

Comprehensive Guide to Website Development in Toronto: Expert Insights from BSMN Consultancy

by: bsmnconsultancy | last post by:

In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

General