When I did my RedHat9 install, I choose Workstation and customized the
packages I wanted install. As a part of that customization, I chose
mySQL DB; however, I can't seem to find any RedHat documentation that
says how to get to these installed packages. I would like to just start
using them, but not sure where to start. Any hints to get up and going
quickly?
TIA,
Lou
Jul 19 '05
14  4034 
"Lou" <lu*********@ne tscape.net> wrote in message
news:VL******** **************@ news1.news.adel phia.net... "cannot connect to Local MYSQL server through socket '/var/lib/mysql..."
When I check this directory nothing is there.
at the prompt type
/etc/init.d/mysqld start
.... what happens?
JM
thank you, that did the trick...now it's running and I can get the
prompt. Does this mean it will always start or if not, is there a way
to add it the "services" that run on start-up?
Jim Moseby wrote: "Lou" <lu*********@ne tscape.net> wrote in message
news:VL******** **************@ news1.news.adel phia.net...
"cannot connect to Local MYSQL server through socket '/var/lib/mysql..."
When I check this directory nothing is there.
at the prompt type
/etc/init.d/mysqld start
... what happens?
JM
thank you, that did the trick...now it's running and I can get the
prompt. Does this mean it will always start or if not, is there a way
to add it the "services" that run on start-up?
Jim Moseby wrote: "Lou" <lu*********@ne tscape.net> wrote in message
news:VL******** **************@ news1.news.adel phia.net...
"cannot connect to Local MYSQL server through socket '/var/lib/mysql..."
When I check this directory nothing is there.
at the prompt type
/etc/init.d/mysqld start
... what happens?
JM
"Lou" <lu*********@ne tscape.net> wrote in message
news:qi******** **************@ news1.news.adel phia.net... thank you, that did the trick...now it's running and I can get the
prompt. Does this mean it will always start or if not, is there a way
to add it the "services" that run on start-up?
No. It means that it is not automatically starting, and will not unless you
tell it to. An easy way (in RH9) to set it to autostart is to type 'setup'
at the prompt, select 'Services' from the menu, and place a tick next to
mysqld.
JM
"Lou" <lu*********@ne tscape.net> wrote in message
news:qi******** **************@ news1.news.adel phia.net... thank you, that did the trick...now it's running and I can get the
prompt. Does this mean it will always start or if not, is there a way
to add it the "services" that run on start-up?
No. It means that it is not automatically starting, and will not unless you
tell it to. An easy way (in RH9) to set it to autostart is to type 'setup'
at the prompt, select 'Services' from the menu, and place a tick next to
mysqld.
JM This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Ka |
last post by:
I install a mysql server in default installation with latin charset, but
I want to use GBK(a chinese charset), so that I can store and
search chinese words directly.
so, I download, unpack and then rewrite the mysql.spec and then recompile
the
package mysql-3.23.56-1.80.src.rpm.
first, this file contains some files:
# rpm2cpio mysql-3.23.56-1.80.src.rpm |cpio -t
|
by: Eric Raymond |
last post by:
When installing the rpms (or the tar file) onto Red Hat Enteprise
Linux AS Beta 1 (Taroon), we get the follwing error:
Installing all prepared tables
/usr/bin/mysql_install_db: line 1: 7690 Segmentation fault
/usr/sbin/mysqld --bootstrap --skip-grant-tables --basedir=/
--datadir=/var/lib/mysql --skip-innodb --skip-bdb
Installation of grant tables failed
The log file simply shows a start and a stop of the server.
|
by: darin Ginther |
last post by:
RE:mysql-3.23.58-1.73.i386.rpm
mysqld does not exist on my system...
I think this is just the client software.. I have to install the
database itself from source, IE - mysql-3.23.58-pc-linux-i686.tar.gz??
# rpm -qa | grep mysql
mysql-3.23.58-1.73
|
by: zratis |
last post by:
Hello,
I wanted to find out what MySQL administrators think about MySQL
installation on RedHat and other Linux distributions with the use of
RPM. RedHat reallocates all MySQL files into different places in the
file system. Is it easier to learn MySQL administration on a non-RPM
MySQL installation? Are the standards that are used in books,
articles and guides more relevant to non-RPM installations? I get a
sense that it's better to...
|
by: KJemison |
last post by:
Well.... just wanted to know if the people at the MySQL.org site ever
look at the posts in this group. If they do, they can possibly us a
little constructive criticism from a slightly irritated customer.
Seems to me that if someone installs Redhat 9 with MySQL from the
original CD source which is version 3.23.54a and then follows the
instructions at the MySQL website on upgrading to a newer
version....(4.0.22) then, it should work. I...
| | |
by: Jeff S |
last post by:
To make a long story short, let me say I had MySQL working on Windows 98
and everything was fine. Well, I took the big leap and removed all
traces of Windows and Microsoft from the computer. (hooray!) Once I had
Linux running OK, I downloaded and installed MySQL using an RPM package.
I guess the server is running (it says it is every time the computer
starts and it stops successfully every time the computer shuts down)
however, I cannot...
|
by: Richard Petty |
last post by:
Today I began preparations for upgrading MySQL. I downloaded the binary RPMs for
Red Hat Enterprise 4 (we're running CentOS, a clone) for MySQL 5.0.13 from the
MySQL AB web site. Running a test, I got this:
rpm -hUv MySQL* --test
warning: MySQL-client-standard-5.0.13-0.rhel4.i386.rpm: V3 DSA signature: NOKEY,
key ID 5072e1f5
error: Failed dependencies:
libmysqlclient.so.14 is needed by (installed) mod_auth_mysql-2.6.1-2.2.i386...
|
by: manish deshpande |
last post by:
Hi,
When i'm installing MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm by the following command:
rpm -i MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm the following error is being shown:
warning: MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm: V3 DSA signature: NOKEY, key ID 5072e1f5
file /etc/my.cnf from install of MySQL-server-standard-5.0.24a-0.rhel3 conflicts with file from package mysql-3.23.58-1
file...
|
by: eholz1 |
last post by:
Hello Newsgroup,
I have redhat 3.0 Enterprise, and mysql (3.58.xxx more or less)
installed from a redhat rpm,
and php 4.3.9 (installed from an rpm) - I can access data from my mysql
db using php and the "pear" Db .php. I recently upgraded my Apache to
2.2 and installed (more or less) PHP 5.2 as well - neither of these
installs were from a Redhat rpm, I downloaded the tarballs, extracted,
configed, make, etc.
Apache seems to work fine...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
