|
by: Plater |
last post by:
Here at work we've been using MaxStream's Xbee product (ZigBee implementation). Now I have to re-work the code (our head software guy banded it out in like a day as a time crunch so it's seriously lacking).
The problem is, I have not been able to understand the conversation flow for the XBEE API and was wondering if anyone was familiar with it?
My scenario is this:
I have multiple probes with the XBEE products, each with their 16bit MY...
|
by: rppprez |
last post by:
hello everybody i'm quite new and i hoping i can get some assistance. i am using a xbee pro wireless device ( http://ftp1.digi.com/support/documentation/manual_xb_oem-rf-modules_802.15.4_v1.xAx.pdf) it uses xtcu software to interface with the pc via the usb. i'm not understanding their software to well but i am trying to create a c/c++ program to capture the signal when it is sent to the pc. And after it captures the signal it would then execute...
|
by: shobhon |
last post by:
Can anyone please tell how to setup xbee series 2 . i have set up one xbee with co-ordinator and ther other one with end device. Now i have i have opened one of the ADC port setup sample rate.. but it is not tranmitting anything unlike series one when i open ADC and sample rate it starts trasmites data stright away.. (using xctu) i have also tested with connecting the port with a analog voltage again series 1 works but series 2 does not.
Does...
|
by: mlkushan |
last post by:
hi,
I have imported Xbee modules (XB24-BWIT-004) and Xbee starter pro development kit. It has XBIB-U-DEV and XBIB-R-Dev development kits with 10 Xbee motes and two Xbee pro motes. So I have configured the codewarrior development environment in my PC (Windows XP) and also I have configured the TOSSIM environment with Cygwin (on the same platform). So I need to know, how I should start to program the Xbee motes using nesC programming language....
|
by: electronics |
last post by:
Hi all,
I recently purchased an xbee series2 developement kit from digi. I am simple trying to turn on an LED on an end device by sending in an AT command in the form of an API packet.The situation I'm in now is:
(XBIB-U) board as the co-ordinator
(XBIB-R) board as the end device
I have a basic network setup with 1 co-ordinator and 1 end device. I am trying to send an AT command in the form of an API packet from the co-ordinator to the...
|
|
by: Pancakes |
last post by:
Hello all, this is my first post in these forums, so bear with me if I've broken a few rules here or there.
Anyhow, I would like to ask if anyone if familiar with the XBee Pro, here, and documentation is available here. The documents don't match the product exactly, the links from the product page ended up to the documents page I supplied.
The difference between the models are just the effective range (I think), and the models are...
|
by: KDaly |
last post by:
Hey guys, I was kind of hoping that someone could help me out with a project I am working on for school...
We are desigining a robot that someone will approach, and the robot will ask the user if they would like to go to room A, B, or C. (keep in mind all the rooms are in a striagh hallway with no turns).
We have decided to put Xbee modules at each room and an additional xbee module on the robot. In front of each room, we would like to...
|
by: ritusingh2008 |
last post by:
Hello,
I am recently using Xbee radios.I need to develop a relay network using 3 radios.how is it possible?
I am using X-CTU software.
Is it possible to develop a relay network using only X-CTU software.
And i have another doubt.Is C or Matlab programming is possible in Xbee's.
If so how can we do it.
Please answer to my doubts.
Thanks
|
by: ritusingh2008 |
last post by:
Hello,
I have transmitted an APi frame fron one xbee radio to other.I am able to receive it in 2nd xbee radios.I can see it xbee terminal.If i want to find the RSSI value for it how can i calculate it.
Can anyone please explain it detail?
Thanks
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
|