if i want to debug a dotnet application the break point is not going to hit.
giving the message as "The break point will not currently hit,No Symbols
have been loaded for this document".
if i rebuild once then it is working properly,if run directly with F5 it is
not going to hit the break point.
this problem is not for one applciation, for every project (even new) i am
getting this problem/
from yestarday i am fighting with this problem..
please solve...
thank u
chandu
4  4890 
Hello chandu,
Are u sure that
- u build debug version or u generate pdb in the release version
- your debug info locates nex to the executable file
?
cif i want to debug a dotnet application the break point is not going
cto hit.
c>
cgiving the message as "The break point will not currently hit,No
cSymbols have been loaded for this document".
c>
cif i rebuild once then it is working properly,if run directly with F5
cit is not going to hit the break point.
c>
cthis problem is not for one applciation, for every project (even new)
ci am getting this problem/
c>
cfrom yestarday i am fighting with this problem..
c>
cplease solve...
c>
cthank u
cchandu
---
WBR, Michael Nemtsev [C# MVP].
My blog: http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high and we
miss it, but that it is too low and we reach it" (c) Michelangelo
i am generating pdb in debeg version
yes pdb is located to next to exe/
for every visual studio application i am getting same problem,and if change
the code i need to rebuild every time
for sample application i am sending this info:
'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\mscoree.d ll', No symbols loaded.
'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\kernel32. dll', No symbols loaded.
'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\advapi32. dll', No symbols loaded.
'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\rpcrt4.dl l', No symbols loaded.
............... ............... ....
like this giving in out put window.
"Michael Nemtsev" <ne*****@msn.co mwrote in message
news:a2******** *************** ****@msnews.mic rosoft.com...
Hello chandu,
Are u sure that
- u build debug version or u generate pdb in the release version
- your debug info locates nex to the executable file
?
cif i want to debug a dotnet application the break point is not going
cto hit.
ccgiving the message as "The break point will not currently hit,No
cSymbols have been loaded for this document".
ccif i rebuild once then it is working properly,if run directly with
F5
cit is not going to hit the break point.
ccthis problem is not for one applciation, for every project (even
new)
ci am getting this problem/
ccfrom yestarday i am fighting with this problem..
ccplease solve...
ccthank u
cchandu
---
WBR, Michael Nemtsev [C# MVP]. My blog: http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high and we
miss it, but that it is too low and we reach it" (c) Michelangelo
Hello chandu,
Yep, right
The reason is that the Windows has no PDF for the system dlls.
So u need to download the debugging symbols from the MS site http://www.microsoft.com/whdc/devtoo...symbolpkg.mspx
ci am generating pdb in debeg version
cyes pdb is located to next to exe/
cfor every visual studio application i am getting same problem,and if
cchange
cthe code i need to rebuild every time
cfor sample application i am sending this info:
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\mscoree.d ll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\kernel32. dll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\advapi32. dll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\rpcrt4.dl l', No symbols
cloaded.
c.............. ............... ....
clike this giving in out put window.
c>
c"Michael Nemtsev" <ne*****@msn.co mwrote in message
cnews:a2******* *************** *****@msnews.mi crosoft.com...
c>
>Hello chandu,
Are u sure that
- u build debug version or u generate pdb in the release version
- your debug info locates nex to the executable file
?
cif i want to debug a dotnet application the break point is not
going
cto hit.
ccgiving the message as "The break point will not currently
hit,No
cSymbols have been loaded for this document".
ccif i rebuild once then it is working properly,if run directly
with
F5
cit is not going to hit the break point.
ccthis problem is not for one applciation, for every project
(even
new)
ci am getting this problem/
ccfrom yestarday i am fighting with this problem..
ccplease solve...
ccthank u
cchandu
---
WBR, Michael Nemtsev [C# MVP]. My blog:
http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high
and we miss it, but that it is too low and we reach it" (c)
Michelangelo
---
WBR, Michael Nemtsev [C# MVP].
My blog: http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high and we
miss it, but that it is too low and we reach it" (c) Michelangelo
in that i had so many options to down load
i am using windowsxp with service pack 2
Upto that day it is debugging correctly.sudde ntly how it happens?
i have to install windows symbols are it has any dotnet symbols packages ?
clarify on this completely please......... ......
"Michael Nemtsev" <ne*****@msn.co mwrote in message
news:a2******** *************** ****@msnews.mic rosoft.com...
Hello chandu,
Yep, right
The reason is that the Windows has no PDF for the system dlls.
So u need to download the debugging symbols from the MS site
http://www.microsoft.com/whdc/devtoo...symbolpkg.mspx
ci am generating pdb in debeg version
cyes pdb is located to next to exe/
cfor every visual studio application i am getting same problem,and if
cchange
cthe code i need to rebuild every time
cfor sample application i am sending this info:
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\mscoree.d ll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\kernel32. dll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\advapi32. dll', No symbols
cloaded.
c'sample3.exe': Loaded 'C:\WINDOWS\sys tem32\rpcrt4.dl l', No symbols
cloaded.
c.............. ............... ....
clike this giving in out put window.
cc"Michael Nemtsev" <ne*****@msn.co mwrote in message
cnews:a2******* *************** *****@msnews.mi crosoft.com...
c>
>>Hello chandu,
Are u sure that
- u build debug version or u generate pdb in the release version
- your debug info locates nex to the executable file
?
cif i want to debug a dotnet application the break point is not
going
cto hit.
ccgiving the message as "The break point will not currently
hit,No
cSymbols have been loaded for this document".
ccif i rebuild once then it is working properly,if run directly
with
F5
cit is not going to hit the break point.
ccthis problem is not for one applciation, for every project
(even
new)
ci am getting this problem/
ccfrom yestarday i am fighting with this problem..
ccplease solve...
ccthank u
cchandu
---
WBR, Michael Nemtsev [C# MVP]. My blog:
http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high
and we miss it, but that it is too low and we reach it" (c)
Michelangel o
---
WBR, Michael Nemtsev [C# MVP]. My blog: http://spaces.live.com/laflour
Team blog: http://devkids.blogspot.com/
"The greatest danger for most of us is not that our aim is too high and we
miss it, but that it is too low and we reach it" (c) Michelangelo
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: aerobar2 |
last post by:
When I debug my application I get "no symbols loaded"
=================
'DefaultDomain': Loaded 'c:\winnt\microsoft.net\framework\v1.1.4322\mscorlib.dll', No symbols loaded.
'MHSFire': Loaded 'C:\Documents and Settings\bamason\My Documents\Visual Studio Projects\MHSFire\bin\MHSFire.exe', Symbols loaded.
'MHSFire.exe': Loaded 'c:\winnt\assembly\gac\system.windows.forms\1.0.5000.0__b77a5c561934e089\system.windows.forms.dll', No symbols...
|
by: asdf |
last post by:
Hello,
I was enjoying working in VS for half a year without any problems and
now I cannot debug anymore. Without any really reason my Studio tells me
that the page that I want to debug has - No symbols loaded. I use VS
v1.7.3088 and .NET framework v1.1.4322 SP1.
I work with ASP.NET using VB and I'm trying to set a breakpoint on the
ascx.vb file.
|
by: sho_nuff |
last post by:
Looking for the be all end all answer to this issue.
1) Yes, i'm running in the Debug mode and not in Release
2) Yes, the timestamp on my pdb and dll file are in sync
3) Yes, i'm tried deleting my project and fetching our source tree
again
4) Yes, the Module window shows that all symbols are loaded when
running in the debugger
5) Yes, i'm rebooted.
6) Yes, i've deleted my bin and obj folders, restarted, and tried
|
by: |
last post by:
I'm starting up the development server myself and using the "Startup Url"
property of the web project. The problem is i cannot debug. The debug
symbols are never loaded. I realize they are under the temporary internet
files folder but I have even tried using the new depoloyment addin-in but
that does not seem to work either. There is a /bin folder with the debug
symboles in there but it still does not load them up
How can i include the...
|
by: RDI |
last post by:
What's it mean? My prog runs fine. Then as soon as I press ok or cancel,
the following is what's in the output area of the debugger.
TIA
--
RDI
(remove the exclamation from the email address)
| | |
by: wylbur via DotNetMonster.com |
last post by:
I'm having a problem with establishing breakpoints in DbgCLR Version 2.0.
I've set breakpoints for statements in Page_Init, and they were never
triggered
when I loaded the webpage. In the code window of the debugger,
I place my cursor over the breakpoint symbols in the left column,
and I get the message:
"The Breakpoint will not currently be hit.
No Symbols have been loaded for this document."
|
by: wASP |
last post by:
Hi,
I'm posting this again - I'm having some kind of a problem
with my posts disappearing ...
I'm having a problem with establishing breakpoints in DbgCLR Version 2.0.
I've set breakpoints for statements in Page_Init, and they were never triggered
|
by: wASP |
last post by:
Hi,
I'm having a problem with establishing breakpoints in DbgCLR Version 2.0.
I've set breakpoints for statements in Page_Init, and they were never triggered
when I loaded the webpage. I place my cursor over the breakpoint symbols,
and I get the message:
"The Breakpoint will not currently be hit.
No Symbols have been loaded for this document."
|
by: John Peterson |
last post by:
I'm a little confused by the topics system here. I wanted to respond to this post but it was closed or something. But here is my follow up:
Yes, I checked all that. My solution is a C++ solution and the missing symbols occur in one of the DLLs.
No, for me there isn't, I searched for B.pdb in my entire code directory and there is no second B.pdb file. However, I found a Binary_debugB.pdb file one level up from the the project...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
