Hello,
in a simple console application I try to create a file with some code like:
FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create,
FileAccess.Writ e);
StreamWriter sw = new StreamWriter(fi le);
sw.Write("Hello ");
sw.Close();
file.Close();
I will get an error System.Security .SecurityExcept ion
Are there only one way to avoid this and how this can be done?
Thanks and regards
Mark 12 1967
Mark,
You get this exception because you don't have rights to create or open
the file in the directory that it is set in. You need to try and create the
file in a directory that you have rights to, or, if the file exists, check
the rights on the file to make sure that you can open it for writing.
Hope this helps.
--
- Nicholas Paldino [.NET/C# MVP]
- mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message
news:dc******** *****@news.t-online.com... Hello,
in a simple console application I try to create a file with some code like:
FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, FileAccess.Writ e); StreamWriter sw = new StreamWriter(fi le); sw.Write("Hello "); sw.Close(); file.Close();
I will get an error System.Security .SecurityExcept ion
Are there only one way to avoid this and how this can be done?
Thanks and regards Mark
Hi Nicholas,
I tried a console application and as admin I have no restriction in any
directory.
regards Mark
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb
im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... Mark,
You get this exception because you don't have rights to create or open the file in the directory that it is set in. You need to try and create
the file in a directory that you have rights to, or, if the file exists, check the rights on the file to make sure that you can open it for writing.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... Hello,
in a simple console application I try to create a file with some code like:
FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, FileAccess.Writ e); StreamWriter sw = new StreamWriter(fi le); sw.Write("Hello "); sw.Close(); file.Close();
I will get an error System.Security .SecurityExcept ion
Are there only one way to avoid this and how this can be done?
Thanks and regards Mark
Are you sure that the security exception is for opening the file then?
Where is the application loaded from? Are you running it from a network
share, or the internet? If so, then the application is going to be granted
a limited permission set.
--
- Nicholas Paldino [.NET/C# MVP]
- mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message
news:dc******** *****@news.t-online.com... Hi Nicholas,
I tried a console application and as admin I have no restriction in any directory.
regards Mark "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... Mark,
You get this exception because you don't have rights to create or open the file in the directory that it is set in. You need to try and create the file in a directory that you have rights to, or, if the file exists, check the rights on the file to make sure that you can open it for writing.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hello, > > in a simple console application I try to create a file with some code > like: > > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, > FileAccess.Writ e); > StreamWriter sw = new StreamWriter(fi le); > sw.Write("Hello "); > sw.Close(); > file.Close(); > > I will get an error System.Security .SecurityExcept ion > > Are there only one way to avoid this and how this can be done? > > Thanks and regards > Mark > >
hi,
post the text of the exception.
cheers,
--
Ignacio Machin,
ignacio.machin AT dot.state.fl.us
Florida Department Of Transportation
"Mark" <Sc********@gmx .net> wrote in message
news:dc******** *****@news.t-online.com... Hi Nicholas,
I tried a console application and as admin I have no restriction in any directory.
regards Mark "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... Mark,
You get this exception because you don't have rights to create or open the file in the directory that it is set in. You need to try and create the file in a directory that you have rights to, or, if the file exists, check the rights on the file to make sure that you can open it for writing.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hello, > > in a simple console application I try to create a file with some code > like: > > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, > FileAccess.Writ e); > StreamWriter sw = new StreamWriter(fi le); > sw.Write("Hello "); > sw.Close(); > file.Close(); > > I will get an error System.Security .SecurityExcept ion > > Are there only one way to avoid this and how this can be done? > > Thanks and regards > Mark > >
hi
Request for the permission of type
System.Security .Permissions.Fi leIOPermission, mscorlib, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b77a5c561934e08 9 failed.
regards
Mark
"Ignacio Machin ( .NET/ C# MVP )" <ignacio.mach in AT dot.state.fl.us >
schrieb im Newsbeitrag news:ON******** ******@TK2MSFTN GP12.phx.gbl... hi,
post the text of the exception.
cheers,
-- Ignacio Machin, ignacio.machin AT dot.state.fl.us Florida Department Of Transportation "Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... Hi Nicholas,
I tried a console application and as admin I have no restriction in any directory.
regards Mark "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om>
schrieb im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... Mark,
You get this exception because you don't have rights to create or open the file in the directory that it is set in. You need to try and
create the file in a directory that you have rights to, or, if the file exists, check the rights on the file to make sure that you can open it for writing.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hello, > > in a simple console application I try to create a file with some code > like: > > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, > FileAccess.Writ e); > StreamWriter sw = new StreamWriter(fi le); > sw.Write("Hello "); > sw.Close(); > file.Close(); > > I will get an error System.Security .SecurityExcept ion > > Are there only one way to avoid this and how this can be done? > > Thanks and regards > Mark > >
hi,
what I am trying:
1. I create a file x.cs with notepad nothing more than a main
public static void Main( string[] args )
{
try
{
FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create,
FileAccess.Writ e);
StreamWriter sw = new StreamWriter(fi le);
sw.Write("Hello ");
sw.Close();
file.Close();
}
catch( Exception ex )
{
Console.WriteLi ne( ex.Message );
};
}
2. built it with csc.exe x.cs and got a x.exe
3. executing x.exe on commandline (local dir, no shares, as admin, no
domain, simple way)
4. got exception - I guess .NET told me that this application is not safe
writing files.
Request for the permission of type
System.Security .Permissions.Fi leIOPermission, mscorlib, Version=1.0.500 0.0,
Culture=neutral , PublicKeyToken= b77a5c561934e08 9 failed.
regards
Mark
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb
im Newsbeitrag news:e2******** ******@TK2MSFTN GP14.phx.gbl... Are you sure that the security exception is for opening the file then? Where is the application loaded from? Are you running it from a network share, or the internet? If so, then the application is going to be
granted a limited permission set.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... Hi Nicholas,
I tried a console application and as admin I have no restriction in any directory.
regards Mark "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om>
schrieb im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... Mark,
You get this exception because you don't have rights to create or open the file in the directory that it is set in. You need to try and
create the file in a directory that you have rights to, or, if the file exists, check the rights on the file to make sure that you can open it for writing.
Hope this helps.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hello, > > in a simple console application I try to create a file with some code > like: > > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, > FileAccess.Writ e); > StreamWriter sw = new StreamWriter(fi le); > sw.Write("Hello "); > sw.Close(); > file.Close(); > > I will get an error System.Security .SecurityExcept ion > > Are there only one way to avoid this and how this can be done? > > Thanks and regards > Mark > >
You loading the executable from a network share.
Programs that are loaded from a network are not trusted to access the local
file system, you have to grant "fulltrust" to the the share you are loading
this application from using caspol.exe.
Willy.
"Mark" <Sc********@gmx .net> wrote in message
news:dc******** *****@news.t-online.com... hi,
what I am trying:
1. I create a file x.cs with notepad nothing more than a main public static void Main( string[] args ) { try { FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, FileAccess.Writ e); StreamWriter sw = new StreamWriter(fi le); sw.Write("Hello "); sw.Close(); file.Close(); } catch( Exception ex ) { Console.WriteLi ne( ex.Message ); }; }
2. built it with csc.exe x.cs and got a x.exe 3. executing x.exe on commandline (local dir, no shares, as admin, no domain, simple way) 4. got exception - I guess .NET told me that this application is not safe writing files. Request for the permission of type System.Security .Permissions.Fi leIOPermission, mscorlib, Version=1.0.500 0.0, Culture=neutral , PublicKeyToken= b77a5c561934e08 9 failed.
regards Mark
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb im Newsbeitrag news:e2******** ******@TK2MSFTN GP14.phx.gbl... Are you sure that the security exception is for opening the file then? Where is the application loaded from? Are you running it from a network share, or the internet? If so, then the application is going to be granted a limited permission set.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hi Nicholas, > > I tried a console application and as admin I have no restriction in any > directory. > > regards Mark > > > > "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb > im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... >> Mark, >> >> You get this exception because you don't have rights to create or >> open >> the file in the directory that it is set in. You need to try and create > the >> file in a directory that you have rights to, or, if the file exists, >> check >> the rights on the file to make sure that you can open it for writing. >> >> Hope this helps. >> >> >> -- >> - Nicholas Paldino [.NET/C# MVP] >> - mv*@spam.guard. caspershouse.co m >> >> "Mark" <Sc********@gmx .net> wrote in message >> news:dc******** *****@news.t-online.com... >> > Hello, >> > >> > in a simple console application I try to create a file with some >> > code >> > like: >> > >> > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, >> > FileAccess.Writ e); >> > StreamWriter sw = new StreamWriter(fi le); >> > sw.Write("Hello "); >> > sw.Close(); >> > file.Close(); >> > >> > I will get an error System.Security .SecurityExcept ion >> > >> > Are there only one way to avoid this and how this can be done? >> > >> > Thanks and regards >> > Mark >> > >> > >> >> > >
"Mark" <Sc********@gmx .net> wrote in message
news:dc******** *****@news.t-online.com... hi,
what I am trying:
1. I create a file x.cs with notepad nothing more than a main
<snip> 2. built it with csc.exe x.cs and got a x.exe 3. executing x.exe on commandline (local dir, no shares, as admin, no domain, simple way)
If you're running the exe from a local hard drive (as opposed to somewhere
on your network), it sounds like you might have modified your CAS policy.
To verify what permissions your executable is being assigned under your
current CAS policy, follow the steps listed in the "How can I test my policy
changes?" section at http://msdn.microsoft.com/library/en...ecpoladmin.asp.
If your assembly is local, and it's granted anything other than an
unrestricted permission set, your CAS policy has been modified from its
default configuration.
If you are running with modified policy, was it a deliberate change or not?
If it wasn't deliberate, you might want to simply revert to the default
configuration (after backing up your current configuration). If it was
deliberate, then adding a new code group to allow your application to run as
desired might be a better approach.
If your assembly is granted unrestricted permissions under policy, might the
problem stem from use of assembly-level permissions attributes? In
particular, might you be using any attributes with
SecurityAction. RequestOptional ?
4. got exception - I guess .NET told me that this application is not safe writing files. Request for the permission of type System.Security .Permissions.Fi leIOPermission, mscorlib, Version=1.0.500 0.0, Culture=neutral , PublicKeyToken= b77a5c561934e08 9 failed.
regards Mark
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb im Newsbeitrag news:e2******** ******@TK2MSFTN GP14.phx.gbl... Are you sure that the security exception is for opening the file then? Where is the application loaded from? Are you running it from a network share, or the internet? If so, then the application is going to be granted a limited permission set.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hi Nicholas, > > I tried a console application and as admin I have no restriction in any > directory. > > regards Mark > > > > "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb > im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... >> Mark, >> >> You get this exception because you don't have rights to create or >> open >> the file in the directory that it is set in. You need to try and create > the >> file in a directory that you have rights to, or, if the file exists, >> check >> the rights on the file to make sure that you can open it for writing. >> >> Hope this helps. >> >> >> -- >> - Nicholas Paldino [.NET/C# MVP] >> - mv*@spam.guard. caspershouse.co m >> >> "Mark" <Sc********@gmx .net> wrote in message >> news:dc******** *****@news.t-online.com... >> > Hello, >> > >> > in a simple console application I try to create a file with some >> > code >> > like: >> > >> > FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, >> > FileAccess.Writ e); >> > StreamWriter sw = new StreamWriter(fi le); >> > sw.Write("Hello "); >> > sw.Close(); >> > file.Close(); >> > >> > I will get an error System.Security .SecurityExcept ion >> > >> > Are there only one way to avoid this and how this can be done? >> > >> > Thanks and regards >> > Mark >> > >> > >> >> > >
"Willy Denoyette [MVP]" <wi************ *@telenet.be> wrote in message
news:OL******** ******@TK2MSFTN GP14.phx.gbl... You loading the executable from a network share.
Actually, it sounds like he probably isn't.
Programs that are loaded from a network are not trusted to access the local file system, you have to grant "fulltrust" to the the share you are loading this application from using caspol.exe.
Granting full trust in order to allow writing to one file is a wee bit of
overkill, no? <g> Willy.
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... hi,
what I am trying:
1. I create a file x.cs with notepad nothing more than a main public static void Main( string[] args ) { try { FileStream file = new FileStream("tes t.txt", FileMode.OpenOr Create, FileAccess.Writ e); StreamWriter sw = new StreamWriter(fi le); sw.Write("Hello "); sw.Close(); file.Close(); } catch( Exception ex ) { Console.WriteLi ne( ex.Message ); }; }
2. built it with csc.exe x.cs and got a x.exe 3. executing x.exe on commandline (local dir, no shares, as admin, no domain, simple way) 4. got exception - I guess .NET told me that this application is not safe writing files. Request for the permission of type System.Security .Permissions.Fi leIOPermission, mscorlib, Version=1.0.500 0.0, Culture=neutral , PublicKeyToken= b77a5c561934e08 9 failed.
regards Mark
"Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb im Newsbeitrag news:e2******** ******@TK2MSFTN GP14.phx.gbl... Are you sure that the security exception is for opening the file then? Where is the application loaded from? Are you running it from a network share, or the internet? If so, then the application is going to be granted a limited permission set.
-- - Nicholas Paldino [.NET/C# MVP] - mv*@spam.guard. caspershouse.co m
"Mark" <Sc********@gmx .net> wrote in message news:dc******** *****@news.t-online.com... > Hi Nicholas, > > I tried a console application and as admin I have no restriction in > any > directory. > > regards Mark > > > > "Nicholas Paldino [.NET/C# MVP]" <mv*@spam.guard .caspershouse.c om> schrieb > im Newsbeitrag news:es******** ******@tk2msftn gp13.phx.gbl... >> Mark, >> >> You get this exception because you don't have rights to create or >> open >> the file in the directory that it is set in. You need to try and create > the >> file in a directory that you have rights to, or, if the file exists, >> check >> the rights on the file to make sure that you can open it for writing. >> >> Hope this helps. >> >> >> -- >> - Nicholas Paldino [.NET/C# MVP] >> - mv*@spam.guard. caspershouse.co m >> >> "Mark" <Sc********@gmx .net> wrote in message >> news:dc******** *****@news.t-online.com... >> > Hello, >> > >> > in a simple console application I try to create a file with some >> > code >> > like: >> > >> > FileStream file = new FileStream("tes t.txt", >> > FileMode.OpenOr Create, >> > FileAccess.Writ e); >> > StreamWriter sw = new StreamWriter(fi le); >> > sw.Write("Hello "); >> > sw.Close(); >> > file.Close(); >> > >> > I will get an error System.Security .SecurityExcept ion >> > >> > Are there only one way to avoid this and how this can be done? >> > >> > Thanks and regards >> > Mark >> > >> > >> >> > >
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Olaf Baeyens |
last post by:
Can someone out there point me to a URL or other reference how to use these
security stuff in .NET?
I know everything can be found online on the msdn but since I am new to this
security stuff, I have a very hard time to find the correct page in the
zillions of abstract pages talking about this topic.
One of the problems is this:
I can find information about FileIOPermission here:
|
by: Angelos Karantzalis |
last post by:
Is there a way to set Permissions based on user roles by using some
configuration file for my application ?
I'm coming from a Java background, where that could very easily be
accomplished but although I've searched around MSDN I can't find a clear
answer to this ...
Thanks a lot guys,
Angel
|
by: raykyoto |
last post by:
Hi all,
I'm sure this is a popular question that comes up every few months
here. Indeed, I've looked at some of the past postings, but I would
like to ask things differently.
Basically, I'm using a flat file to storing data. I have to do this
because mySQL is not installed on my web server, and I am not the root
user. The amount of data is so small, that it isn't worth a full-blown
database anyway. However, while the data is...
|
by: Mike MacSween |
last post by:
S**t for brains strikes again!
Why did I do that? When I met the clients and at some point they vaguely
asked whether eventually would it be possible to have some people who could
read the data and some who couldn't but that it wasn't important right now.
And I said, 'sure, we can do that later'.
So now I've developed an app without any thought to security and am trying
to apply it afterwards. Doh!, doh! and triple doh!
|
by: Namratha Shah \(Nasha\) |
last post by:
Hey Guys,
Today we are going to look at Code Access Security.
Code access security is a feature of .NET that manages code depending on its
trust level. If the CLS trusts the code enough to allow it ro run then it
will execute, the code execution depends on the permission provided to the
assembly. If the code is not trusted wnough to run or it attempts to perform
an action which doe not have the required permissions then its execution...
| |
by: Marina |
last post by:
Hi,
I am trying to find the minimum security settings to allow a windows control
embedded in IE have full trust.
If I give the entire Intranet zone full trust, this works. However, this is
very broad and gives the entire zone high privleges.
I tried giving just the assembly full trust (using the full URL for the
DLL), but this doesn't seem to work.
|
by: Budhi Saputra Prasetya |
last post by:
Hi,
I managed to create a Windows Form Control and put it on my ASP .NET page. I
have done the suggestion that is provided by modifying the security settings.
From the stack trace, I would assume that the code throws exception when it
is trying to retrieve the processes list that has certain name. Below is the
code that I use to retrieve the processes.
Process processes = Process.GetProcessesByName("xxxx");
|
by: Earl Anderson |
last post by:
First, I feel somewhat embarrassed and apologetic that this post is lengthy,
but in an effort to furnish sufficient information (as opposed to too little
information) to you, I wanted to supply all of the relevant facts. Second,
despite the fact that I think the obvious 'quick' answer to my question
would be 'Yes', I am seeking your wisdom and recommendation to the question
as to this particular set of circumstances.
I have 20 Security...
|
by: Bill E. |
last post by:
I will be creating an application using MS Access as a client to SQL
Server 2005. Each user will have the client installed on his/her
machine. Some users will be attached to the local network where the
SQL Server resides. Others will access the network via VPN.
I was thinking of using an MDW workgroup file located on a network
server to control access to various user interface elements (i.e.,
forms, reports) using defined groups. In...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |