Hi,
I created a C# program that update SQL Server table
row by row.
I referenced third party dll file to do the necessary
modification for each row.
And I used foreach loop to update data in the table.
The problem is the poor performance.
If I use the third party program, I can process 10,000
records within a minute, but if I try with my program,
it took almost 10 minutes for 10,000 records.
I tried to create index on the primary column before
update, but it didn't help much.
I know that cursor like update results slower performance,
but I need to process every single rows.
Does anyone know hot to improve performance in this
situation?
Thank you in advance. 1 2506
It could be a few things..but the first that comes to mind is are you
leaving the connection open or are you closing it each time. Normally you
want to close a connectino immediately, but if you are iterating through a
loop 10,000 times, leaving it open until it's done processing( make sure you
have a close in the finally block though) may have a big performance
enhancing effect.
If you post the code, it may be easier to figure out.
HTH,
Bill
"hrhoe" <hr***@hotmail. com> wrote in message
news:01******** *************** *****@phx.gbl.. . Hi, I created a C# program that update SQL Server table row by row. I referenced third party dll file to do the necessary modification for each row. And I used foreach loop to update data in the table.
The problem is the poor performance. If I use the third party program, I can process 10,000 records within a minute, but if I try with my program, it took almost 10 minutes for 10,000 records. I tried to create index on the primary column before update, but it didn't help much. I know that cursor like update results slower performance, but I need to process every single rows. Does anyone know hot to improve performance in this situation?
Thank you in advance. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Felix |
last post by:
Dear Sql Server experts:
First off, I am no sql server expert :)
A few months ago I put a database into a production environment.
Recently, It was brought to my attention that a particular query that
executed quite quickly in our dev environment was painfully slow in
production. I analyzed the the plan on the production server (it
looked good), and then tried quite a few tips that I'd gleaned from
reading newsgroups. Nothing worked....
|
by: MAS |
last post by:
Below is a simple UPDATE that I have to perform on a table that has
about 2.5 million rows (about 4 million in production) This query
runs for an enourmous amount of time (over 1 hour). Both the
ChangerRoleID and the ChangerID are indexed (not unique). Is there
any way to performance tune this?
Controlling the physical drive of the log file isn't possible at our
client sites (we don't have control) and the recovery model needs to
be...
|
by: Gent |
last post by:
am using FOR UPDATE triggers to audit a table that has 67 fields. My
problem is that this slows down the system significantly. I have
narrowed down the problem to the size (Lines of code) that need to be
compiled after the trigger has been fired. There is about 67 IF
Update(fieldName) inside the trigger and a not very complex select
statement inside the if followed by an insert to the audit table. When
I leave only a few IF-s in the...
|
by: kalamos |
last post by:
This statement fails
update ded_temp a
set a.balance = (select sum(b.ln_amt)
from ded_temp b
where a.cust_no = b.cust_no
and a.ded_type_cd = b.ded_type_cd
and a.chk_no = b.chk_no
group by cust_no, ded_type_cd, chk_no)
|
by: serge |
last post by:
/*
This is a long post. You can paste the whole message
in the SQL Query Analyzer.
I have a scenario where there are records
with values pointing to wrong records and I need to fix them
using an Update statement.
I have a sample code to reproduce my problem.
To simplify the scenario I am trying to use Order related
tables to explain a little better the tables i have to work with.
| |
by: robert |
last post by:
been ruminating on the question (mostly in a 390/v7 context) of
whether, and if so when, a row update becomes an insert/delete.
i assume that there is a threshold on the number of columns of
the table, or perhaps bytes, being updated where the engine just
decides, screw it, i'll just make a new one.
surfed this group and google, but couldn't find anything.
the context: we have some java folk who like to parametize/
|
by: Richard |
last post by:
Hello!
I have this piece of SQL code:
UPDATE a
SET Field1 = c.Field1
FROM a
INNER JOIN b ON a.GUID1 = b.GUID1
INNER JOIN c ON b.GUID2 = c.GUID2
WHERE c.Type = 1
|
by: traceable1 |
last post by:
I installed the SQL Server 2005 SP2 update 2 rollup on my 64-bit
server and the performance has tanked!
I installed rollup 3 on some of them, but that did not seem to help.
I thought it was just a linked server performance issue, but my
optimization started running today on one of the "update 2" instances
and so far it's been running about 10 hours longer than it normally
|
by: bravo |
last post by:
hi
using mysql 4.1 i wish to update records using batch update but for a batch of 100, records and table having only 5000 records execution time is approx 2.4 sec i want to know whether this time is fine or i can further reduce it with some performance tunning ... the table which i am using is having 19 columns the update is on a single column ....
one more thing when i use the batch update for deletion batch size 100 along with update...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |