473,661 Members | 2,421 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Running App from Network Issue

Hello,

I have an application that references about 40 assemblies
(approx 80MB in total). I've installed the application on
the network share and given a client PC full trust access.

When I launch the application from the network it takes
approx 4 minutes to startup, I've done network traces and
found that it's spending all it's time downloading the 40
assemblies (approx 80MB).

How can I speed this up so I can still run the application
from the network?

Thanks
Nov 15 '05 #1
1 1119
Hello,

You can probably re-design the application to load assemblies dynamically
only when there's a need for them. It is hard to believe your program needs
whole 80MB of code and data at an arbitrary moment of its lifetime.

--
Dmitriy Lapshin [C# / .NET MVP]
X-Unity Test Studio
http://x-unity.miik.com.ua/teststudio.aspx
Bring the power of unit testing to VS .NET IDE

"Buddy" <an*******@disc ussions.microso ft.com> wrote in message
news:08******** *************** *****@phx.gbl.. .
Hello,

I have an application that references about 40 assemblies
(approx 80MB in total). I've installed the application on
the network share and given a client PC full trust access.

When I launch the application from the network it takes
approx 4 minutes to startup, I've done network traces and
found that it's spending all it's time downloading the 40
assemblies (approx 80MB).

How can I speed this up so I can still run the application
from the network?

Thanks


Nov 15 '05 #2

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

1
1933
by: CES | last post by:
All, If anyone has been following my trials over the last week see(Setting up a Web Application on IIS 5.1 and ASP.Net Security Problems). I'm having a problem running a Asp.Net Web Application. I've finally narrowed the problem down to a security issue: The ASPNET (aspnet_wp) account cannot connect to a Network resource instead of using a local path ie: C:\Inetpub\wwwroot my development site resides on a Network Share...
11
2314
by: ASP.NET User | last post by:
Hi I am in a shop where developers are required to work off of a networ share. This is so that code and other documentation is backed up nightly. This is outside the realm of Visual SourceSafe which we also use for code control. The network drive is used as the working folder. This is a configuration this shop has used for 6 years and I do not see it changing any time soon So I am testing running an ASP.NET Web application with a Clas...
1
2283
by: vighnesh | last post by:
Hi All I am dealing a project in ASP.NET in which I have to establish a connection to SQL Server 2000 database,where the database was located on a remote system. For this I have used SQLConnection object and specified the connetion string.But when it comes to establish a connection its giving me the Error that I. Connection string : workstation id=localhost;packet size=4096;user
3
6549
by: Uday Deo | last post by:
Hi everyone, My coworker has a simple desktop app created in VB.NET. He compiled it and posted on the network drive. When we try to run it from it's network location, it generates unhandled exception error. When we run it from local machine it runs fine. Two things I want to get clarified. 1. Does VB.NET requires any specific namespace to be imported to run the exe over network?
4
4665
by: Jeremy S. | last post by:
We're in the process of writing a new Windows Forms app and the desktop support folks want for it to be run from a network share. I know it's possible (i.e., just have the framework on the clients and a desktop shortcut to the exe out on the network)... but is it really a good idea? What are some arguments for and against running a .NET Windows Forms client from a network share? Here is my initial list... I'd appreciate any additions,...
2
1978
by: Mike | last post by:
Can a vb program running as a serice not use network paths to do file/io? I can't seem to get my program to work with network paths and files. When I use local disk it works fine. When I run it as a none service program it works fine. I'm assuming that vb programs running as a service do not support network paths. Is that true? Thanks in advance.
4
2393
by: Chris Dunaway | last post by:
I have created an application that is to be run from a network share. grant FullTrust to the application. After doing so, the application started fine. I had to make a change and re-compiled the app. Now, it won't start up. Instead, I get the Windows Error about sending the error to Microsoft. I thought perhaps that somehow the changes I made were causing problems so I removed trust for the app and re-added it by issuing the...
5
6639
by: david | last post by:
I'm developing a program that runs using an asyncore loop. Right now I can adequately terminate it using Control-C, but as things get refined I need a better way to stop it. I've developed another program that executes it as a child process using popen2.Popen4(). I was attempting to use signals to stop it (using os.kill()) but I keep running into a problem where sending the signal causes an infinite loop of printing the message...
1
2383
by: =?Utf-8?B?U3ludGF4IDM3NzA3?= | last post by:
I have found lots of people talking about this issue, but no one seems to have a solution. I could really use some help here. Has anyone seen this or have any ideas? I have been running the same backup for 2 years and I came in one morning and it just decided it would not work anymore. Histroy: * Windows 2003 Server
0
8428
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look ! Part I. Meaning of...
0
8341
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
8630
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
1
6181
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
5650
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4177
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
0
4343
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
2760
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
2
1984
muto222
by: muto222 | last post by:
How can i add a mobile payment intergratation into php mysql website.

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.