On my main page (Default.ascx), when I right click and View Source, I
get all this extra junk about DNN, how do I remove it?
<!--
*************** *************** *************** *************** *************** *******--
>
<!-- DotNetNuke - http://www.dotnetnuke.com
-->
<!-- Copyright (c)
2002-2007 -->
<!-- by DotNetNuke Corporation -->
<!--
*************** *************** *************** *************** *************** *******--
>
10  1618 
I'll put my neck on the chopping block, since I don't use DNN but,
wouldn't editing the ascx file itself do the job ?
Are you sure it's "default.as cx" and not "default.as px" ?
In that case, check to see which objects are
imported into "default.aspx". ..and edit the culprit.
In case that's hard-coded into the assemblies, look for the assembly
which is injecting that code, edit the source...and recompile DNN.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== ========
"JPabich" <jp*****@eisinc orporated.comwr ote in message
news:11******** *************@w 5g2000hsg.googl egroups.com...
On my main page (Default.ascx), when I right click and View Source, I
get all this extra junk about DNN, how do I remove it?
<!--
*************** *************** *************** *************** *************** *******--
>>
<!-- DotNetNuke - http://www.dotnetnuke.com
-->
<!-- Copyright (c)
2002-2007 -->
<!-- by DotNetNuke Corporation -->
<!--
*************** *************** *************** *************** *************** *******--
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:eX******** ******@TK2MSFTN GP02.phx.gbl...
In case that's hard-coded into the assemblies, look for the assembly
which is injecting that code, edit the source...and recompile DNN.
I'm guessing you've never tried... ;-)
-- http://www.markrae.net
re:
!I'm guessing you've never tried... ;-)
No, but the same general principle applies to all open source apps, doesn't it ?
DNN has never been something which perked my interest.
I can see how some would get excited about it but...not me.
I remember when DNN came out. It was based on IBuySpy.
<sigh>
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== ========
"Mark Rae" <ma**@markNOSPA Mrae.netwrote in message news:Ok******** ******@TK2MSFTN GP04.phx.gbl...
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:eX******** ******@TK2MSFTN GP02.phx.gbl...
>In case that's hard-coded into the assemblies, look for the assembly
which is injecting that code, edit the source...and recompile DNN.
I'm guessing you've never tried... ;-)
"Juan T. Llibre" <no***********@ nowhere.comwrot e in message
news:Og******** ******@TK2MSFTN GP05.phx.gbl...
re:
!I'm guessing you've never tried... ;-)
No, but the same general principle applies to all open source apps,
doesn't it ?
You'd think that... :-) The basic rule of thumb with DNN (apart, obviously,
from getting rid of it) is that it only really works so long as you never
need to change anything...
DNN has never been something which perked my interest.
Me neither...
I can see how some would get excited about it but...not me.
It may be of limited use to people who aren't developers, I suppose... a bit
like FrontPage...
I remember when DNN came out. It was based on IBuySpy.
<sigh>
Yep - 'nuff said!
-- http://www.markrae.net
On Jun 7, 3:48 pm, "Mark Rae" <m...@markNOSPA Mrae.netwrote:
"Juan T. Llibre" <nomailrepl...@ nowhere.comwrot e in messagenews:Og* *************@T K2MSFTNGP05.phx .gbl...
re:
!I'm guessing you've never tried... ;-)
No, but the same general principle applies to all open source apps,
doesn't it ?
You'd think that... :-) The basic rule of thumb with DNN (apart, obviously,
from getting rid of it) is that it only really works so long as you never
need to change anything...
DNN has never been something which perked my interest.
Me neither...
I can see how some would get excited about it but...not me.
It may be of limited use to people who aren't developers, I suppose... a bit
like FrontPage...
I remember when DNN came out. It was based on IBuySpy.
<sigh>
Yep - 'nuff said!
--http://www.markrae.net
So does anyone know where this header information is stored to remove
it?
You need to examine the code...and figure it out.
Check to see
1. which namespaces are imported
2. which user controls are called
3. which class properties, methods and/or fields are called
4. whether there's a header included in a master page
If you are unable to determine that, post the code for one of the pages.
Maybe somebody can use their eagle eyes to assist you in finding it.
Juan T. Llibre, asp.net MVP
asp.net faq : http://asp.net.do/faq/
foros de asp.net, en español : http://asp.net.do/foros/
=============== =============== ========
"JPabich" <jp*****@eisinc orporated.comwr ote in message
news:11******** **************@ n15g2000prd.goo glegroups.com.. .
>
So does anyone know where this header information is stored to remove it?
"JPabich" <jp*****@eisinc orporated.comwr ote in message
news:11******** **************@ n15g2000prd.goo glegroups.com.. .
So does anyone know where this header information is stored to remove
it?
You *might* be able to get some better help in the DNN forums...
I say *might* because the people in there get really sniffy at people who
are trying to "hack about" with their product...
Good luck - you're going to need it... :-)
-- http://www.markrae.net
As far as I remember DNN, it's not complete open source.
Project has DLL in it that does not come with source.
That DLL does it. So you can not remove it (without going into DLL)
George.
"JPabich" <jp*****@eisinc orporated.comwr ote in message
news:11******** **************@ n15g2000prd.goo glegroups.com.. .
On Jun 7, 3:48 pm, "Mark Rae" <m...@markNOSPA Mrae.netwrote:
>"Juan T. Llibre" <nomailrepl...@ nowhere.comwrot e in
messagenews:Og **************@ TK2MSFTNGP05.ph x.gbl...
re:
!I'm guessing you've never tried... ;-)
No, but the same general principle applies to all open source apps,
doesn't it ?
You'd think that... :-) The basic rule of thumb with DNN (apart,
obviously,
from getting rid of it) is that it only really works so long as you never
need to change anything...
DNN has never been something which perked my interest.
Me neither...
I can see how some would get excited about it but...not me.
It may be of limited use to people who aren't developers, I suppose... a
bit
like FrontPage...
I remember when DNN came out. It was based on IBuySpy.
<sigh>
Yep - 'nuff said!
--http://www.markrae.net
So does anyone know where this header information is stored to remove
it?
If you only see it when you do view source, is it really a show stopper for
your app?
the information your looking for is in the DLL and you can't remove unless
you reverse engineer the DLL and try that, but if you do that good luck in
trying to get it to work again.
"JPabich" <jp*****@eisinc orporated.comwr ote in message
news:11******** **************@ n15g2000prd.goo glegroups.com.. .
On Jun 7, 3:48 pm, "Mark Rae" <m...@markNOSPA Mrae.netwrote:
>"Juan T. Llibre" <nomailrepl...@ nowhere.comwrot e in
messagenews:Og **************@ TK2MSFTNGP05.ph x.gbl...
re:
!I'm guessing you've never tried... ;-)
No, but the same general principle applies to all open source apps,
doesn't it ?
You'd think that... :-) The basic rule of thumb with DNN (apart,
obviously,
from getting rid of it) is that it only really works so long as you never
need to change anything...
DNN has never been something which perked my interest.
Me neither...
I can see how some would get excited about it but...not me.
It may be of limited use to people who aren't developers, I suppose... a
bit
like FrontPage...
I remember when DNN came out. It was based on IBuySpy.
<sigh>
Yep - 'nuff said!
--http://www.markrae.net
So does anyone know where this header information is stored to remove
it?
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Jeff |
last post by:
Hey
I've installed DotNetNuke Starter Kit (4.3.4) together with visual web
developer 2005 express on my development computer
So now I'm able to create DotNetNuke portals using vwd.
But this is as I mention on my development computer with vwd. But what if I
have a client which have asked me to create a DotNetNuke site for them. They
of course want to the portal customized (layout designed by a advertisment
|
by: R.A.M. |
last post by:
Hello,
I have installed .NET on my Windows XP and I would like to install
DotNetNuke 4.0.3. I unzipped DotNetNuke_4.0.3_Install.zip to the folder
E:\Program Files\DotNetNuke and (according to instructions) I modified
web.config and I created DotNetNuke database in SQL Server 2005.
Unfortunatelly when I entered in a browser
http://localhost/DotNetNuke/
I receive the following screen:
DotNetNuke Upgrade Error
|
by: sonali.noni |
last post by:
Hi,
I'm very new to DotNetNuke and asp.net, and having several major
issues. I'd really appreciate any help you could give me!
I'm using DotNetNuke 04.05.03 and asp.net 2.0
I have two databases set up: DotNetNuke (which I installed myself
using the book "Professional Dot Net Nuke 4" as a guide) and DNN
(which I downloaded from the company I work for so it already had some
|
by: raju |
last post by:
Hai
I am new to dotnetnuke.
I installed dotnetnuke and went to the admin page of the
dotnetnuke.( the first page asking user name password).
How to create my own page in dotnetnuke application.
can anyone refer any links for sample application for creating our
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| | |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
