Hi,
I asked this back in January without answer and forgot about it until now.
I've got a basic web form, two textboxes, a couple of radio button groups,
some required field validators, and a Submit and Cancel button.
When the page loads, if I click the Cancel button, the server-side event
fires as normal.
However, if I click the Submit button (with no information entered) the
client-side validators fire, but if I then decide to press the Cancel
button, nothing happens, I need to press it a second time before the
server-side event fires.
I've now noticed that no server-side events fire the first time after the
client-side validation has fired. Not so much of a problem with a Cancel
button, but a nightmare for DropDownLists with AutoPostBack enabled!
TIA,
Stuart.
2  2661 
hello,
if isValid is false, the server side code should never fire?
"Stuart Whiteford" wrote: Hi,
I asked this back in January without answer and forgot about it until now.
I've got a basic web form, two textboxes, a couple of radio button groups,
some required field validators, and a Submit and Cancel button.
When the page loads, if I click the Cancel button, the server-side event
fires as normal.
However, if I click the Submit button (with no information entered) the
client-side validators fire, but if I then decide to press the Cancel
button, nothing happens, I need to press it a second time before the
server-side event fires.
I've now noticed that no server-side events fire the first time after the
client-side validation has fired. Not so much of a problem with a Cancel
button, but a nightmare for DropDownLists with AutoPostBack enabled!
TIA,
Stuart.
Hi,
It's not the server code that would fire if the page was valid, it's any
server-side code on the page.
Once the validator have fired client-side, I then go and change a
DropDownList with AutoPostBack enable, and the PostBack does not happen (the
CausesValidatio n is false on the DropDownList).
Stuart.
"Jon" <Jo*@discussion s.microsoft.com > wrote in message
news:AA******** *************** ***********@mic rosoft.com... hello,
if isValid is false, the server side code should never fire?
"Stuart Whiteford" wrote:
Hi,
I asked this back in January without answer and forgot about it until
now.
I've got a basic web form, two textboxes, a couple of radio button
groups,
some required field validators, and a Submit and Cancel button.
When the page loads, if I click the Cancel button, the server-side event
fires as normal.
However, if I click the Submit button (with no information entered) the
client-side validators fire, but if I then decide to press the Cancel
button, nothing happens, I need to press it a second time before the
server-side event fires.
I've now noticed that no server-side events fire the first time after the
client-side validation has fired. Not so much of a problem with a Cancel
button, but a nightmare for DropDownLists with AutoPostBack enabled!
TIA,
Stuart.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Philip Trim |
last post by:
General Brief:
3 SQL Servers as MS SQL Server 2000 Standard Edition with Service
Pack 3
All using FTP for snapshots
All Servers are both Publishers and Distributors.
Server A has the correct data needed to be replicated to Server B
and C.
Server B and C and have blank data.
Server B and C are blank databases ready for replication.
Server A publishers to Server B and Server C
|
by: Grim Reaper |
last post by:
My work let me put SQL Server 7.0 Enterprise Edition on my laptop. I have
never setup a server from the beginning, so I am a little new at creating
server groups.
Alright, I am trying to create a server group. I right click on the "SQL
Server Group" and make a name of "TEST" and put in the subgroup of "SQL
Server Group".
Next, I try to register the "TEST" server group. I right click on the "TEST"
server group and New Server Group...
|
by: Jay Chan |
last post by:
We have just installed a SQL Server 2000 (SP 3A) onto a computer that
has Windows-2003 Server on it. Now, we cannot get access to that
database server from other computers. Seem like this may be an issue
with Active Directory.
Our network consists of Windows-2000 Servers (SP 4) and Windows-2000
workstations and Windows-XP workstations. We also have SQL Server 2000
(SP2) in three Windows-2000 servers. All work fine. Recently, we get a...
|
by: Robert M. |
last post by:
Information:
Server A: SQL Server 2000 Enterprise Edition. OS is Windows 2003 Server
Enterprise Edition. SQL Service pack is 3a. Member of domain
ABCDomain. Server A is going to function as a Distributor.
Location: New York.
Server B: SQL Server 2000 Enterprise Edition. OS is Windows 2003 Server
Standard Edition. SQL Service pack is 3a. Member of domain
ABCDomain. Server B is going to function as a Subscriber.
|
by: EP |
last post by:
When running my asp.net hosting service (asp.net without IIS), on server
2003 with IIS not installed, I get the following when trying to process a
request.
"System.DllNotFoundException: Unable to load DLL (aspnet_isapi.dll)."
Of course the dll is able to be found, it's still in the framework directory
and for grins I even put it in my service's local directory. This is apparantly
server 2003 not allowing asp.net to be run if IIS was not...
| | |
by: coosa |
last post by:
Hi,
I was installing SQL Server on my machine and during installation my PC
freezed. It happens frequently on my machine. So i tried after
restarting to install it again and since then i always get the same
error message:
"An error occurred while creating one or more registry entries. Please
see C:\WINDOWS\sqlstp.log for details. The problem could be caused by a
low registry quota condition"
I have tried to clean the registry and i...
|
by: Peter |
last post by:
I've purchased VS.NET 2005 Standard and have tried to install SQL Server
2005 Express, but get the following error in the error log.
Please could someone help me....
Microsoft SQL Server 2005 Express Edition x86:
Component Microsoft SQL Server 2005 Express Edition x86 returned an
unexpected value.
***EndOfSession***? Microsoft SQL Server 2005 Express
Edition x86: Component Microsoft SQL Server 2005 Express Edition x86
returned an...
|
by: datapro01 |
last post by:
I am a DB2 DBA that has been asked to become familiar enough with SQL
Server in order to become actively involved in its installation,
implementation, and to review database backup/recovery procedures. SQL
Server will be used by a vendor packaged application.
The problem is that we are awaiting word on whether it will be SQL
Server 2000 or 2005 we will be working with. I have been told that
there are considerable differences between the...
|
by: sara |
last post by:
Hi All,
I was able to connect to MS SQL Server 2005 on my computer but after a
while I can not. When I want to connect to it using MS SQL Server
Management Studio I got this error:
An error has occurred while establishing a connection to the server.
When connecting to SQL Server 2005, this failure may be caused by the
fact that under the default settings SQL Server does not allow remote
connections. (provider: Named Pipes Provider,...
|
by: manish deshpande |
last post by:
Hi,
When i'm installing MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm by the following command:
rpm -i MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm the following error is being shown:
warning: MySQL-server-standard-5.0.24a-0.rhel3.i386.rpm: V3 DSA signature: NOKEY, key ID 5072e1f5
file /etc/my.cnf from install of MySQL-server-standard-5.0.24a-0.rhel3 conflicts with file from package mysql-3.23.58-1
file...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| | |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
