Friends,
Our application is nearing beta deployment, hopefully to selected sites
within a month or so. During development we didn't feel we could commit to
..NET 2.0 because of uncertainties in our own schedule and the MS release
date. But now it looks likes MS is on schedule and so are we.
I'm thinking about doing an initial deployment with .NET 2.0 instead of the
1.1 we used during development. It would be nice to be "current" with "the
latest technology" when we go out the door. My gut tells me that we should
bite the bullet and do this before beta.
Does this sound like a good idea? Are the 2.0 improvements compelling
enough to warrant the new risk or instability? Is it non-trivial to rebuild
our existing application under .NET 2.0?
Pretty open-ended questions for sure. But I'd love a sentence or two of
your thoughts if you have the time. Thanks in advance for any time you
spend on this!
Sincerely, James Hunter Ross 8 941
Well, 2.0 is not 1.1 with added features. It's a different
architecture.
Based on my own limited experience, the changes/improvements in 2.0 are
ones you would want to implement at the start of the project, and would
determine they way you design it.
Hi James,
Since you did your initial development in 1.1, you obviously did not use any
of the new features in the 2.0 platform. This means that upgrading to 2.0 at
this point would be relatively meaningless. Save it for the next version.
--
HTH,
Kevin Spencer
Microsoft MVP
..Net Developer
Ambiguity has a certain quality to it.
"James Hunter Ross" <ja********@one ilsoft.com> wrote in message
news:OQ******** ******@TK2MSFTN GP14.phx.gbl... Friends,
Our application is nearing beta deployment, hopefully to selected sites within a month or so. During development we didn't feel we could commit to .NET 2.0 because of uncertainties in our own schedule and the MS release date. But now it looks likes MS is on schedule and so are we.
I'm thinking about doing an initial deployment with .NET 2.0 instead of the 1.1 we used during development. It would be nice to be "current" with "the latest technology" when we go out the door. My gut tells me that we should bite the bullet and do this before beta.
Does this sound like a good idea? Are the 2.0 improvements compelling enough to warrant the new risk or instability? Is it non-trivial to rebuild our existing application under .NET 2.0?
Pretty open-ended questions for sure. But I'd love a sentence or two of your thoughts if you have the time. Thanks in advance for any time you spend on this!
Sincerely, James Hunter Ross
"Kevin Spencer" <ke***@DIESPAMM ERSDIEtakempis. com> wrote in message
news:eY******** ******@TK2MSFTN GP12.phx.gbl... Hi James,
Since you did your initial development in 1.1, you obviously did not use any of the new features in the 2.0 platform. This means that upgrading to 2.0 at this point would be relatively meaningless. Save it for the next version.
I would lean toward deploying on the 2.0 framework ASAP. Then the next
version would require a framework upgrade. You won't be able to make any
incremental use of the 2.0 framework features without a major release.
Plus there are a ton of performance and engineering enhancements in the 2.0
framework.
David
you should try converting your app to 2.0 once just to see how difficult it
is. some convert easy, some are a lot of work. if it only takes a couple
days, it may be worth it, but you need this answer first.
-- bruce (sqlwork.com)
"James Hunter Ross" <ja********@one ilsoft.com> wrote in message
news:OQ******** ******@TK2MSFTN GP14.phx.gbl... Friends,
Our application is nearing beta deployment, hopefully to selected sites within a month or so. During development we didn't feel we could commit to .NET 2.0 because of uncertainties in our own schedule and the MS release date. But now it looks likes MS is on schedule and so are we.
I'm thinking about doing an initial deployment with .NET 2.0 instead of the 1.1 we used during development. It would be nice to be "current" with "the latest technology" when we go out the door. My gut tells me that we should bite the bullet and do this before beta.
Does this sound like a good idea? Are the 2.0 improvements compelling enough to warrant the new risk or instability? Is it non-trivial to rebuild our existing application under .NET 2.0?
Pretty open-ended questions for sure. But I'd love a sentence or two of your thoughts if you have the time. Thanks in advance for any time you spend on this!
Sincerely, James Hunter Ross
>you should try converting your app to 2.0 once just to see how difficult it is. some convert easy, some are a lot of work. if it only takes a couple days, it may be worth it, but you need this answer first.
How do you know what to do to convert? I guess the first thing to do
would be to try running it as it is on 2.0 and seeing if it works. Is
there anything in 2.0 that will actually break 1.1 code, or does 2.0
just offer newer, better and faster ways of doing things?
-- bruce (sqlwork.com)
"James Hunter Ross" <ja********@one ilsoft.com> wrote in message news:OQ******* *******@TK2MSFT NGP14.phx.gbl.. . Friends,
Our application is nearing beta deployment, hopefully to selected sites within a month or so. During development we didn't feel we could commit to .NET 2.0 because of uncertainties in our own schedule and the MS release date. But now it looks likes MS is on schedule and so are we.
I'm thinking about doing an initial deployment with .NET 2.0 instead of the 1.1 we used during development. It would be nice to be "current" with "the latest technology" when we go out the door. My gut tells me that we should bite the bullet and do this before beta.
Does this sound like a good idea? Are the 2.0 improvements compelling enough to warrant the new risk or instability? Is it non-trivial to rebuild our existing application under .NET 2.0?
Pretty open-ended questions for sure. But I'd love a sentence or two of your thoughts if you have the time. Thanks in advance for any time you spend on this!
Sincerely, James Hunter Ross
--
Alan Silver
(anything added below this line is nothing to do with me)
Try : http://msdn.microsoft.com/asp.net/mi...e/default.aspx
--
Patrice
"Alan Silver" <al*********@no spam.thanx> a écrit dans le message de
news:nI******** ******@nospamth ankyou.spam... you should try converting your app to 2.0 once just to see how difficult
itis. some convert easy, some are a lot of work. if it only takes a couple days, it may be worth it, but you need this answer first.
How do you know what to do to convert? I guess the first thing to do would be to try running it as it is on 2.0 and seeing if it works. Is there anything in 2.0 that will actually break 1.1 code, or does 2.0 just offer newer, better and faster ways of doing things?
-- bruce (sqlwork.com)
"James Hunter Ross" <ja********@one ilsoft.com> wrote in message news:OQ******* *******@TK2MSFT NGP14.phx.gbl.. . Friends,
Our application is nearing beta deployment, hopefully to selected sites within a month or so. During development we didn't feel we could
commit to .NET 2.0 because of uncertainties in our own schedule and the MS release date. But now it looks likes MS is on schedule and so are we.
I'm thinking about doing an initial deployment with .NET 2.0 instead of the 1.1 we used during development. It would be nice to be "current"
with "the latest technology" when we go out the door. My gut tells me that
we should bite the bullet and do this before beta.
Does this sound like a good idea? Are the 2.0 improvements compelling enough to warrant the new risk or instability? Is it non-trivial to rebuild our existing application under .NET 2.0?
Pretty open-ended questions for sure. But I'd love a sentence or two
of your thoughts if you have the time. Thanks in advance for any time you spend on this!
Sincerely, James Hunter Ross
-- Alan Silver (anything added below this line is nothing to do with me) This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: HVTN Recruitment |
last post by:
i am trying to add a very simple roll over for my website. when the pages
load most of the images load but there are a couple that don't. if i roll my
mouse over the images that don't come up, they will appear. does anyone have
any suggestions? i checked my image size and it's ok.
thanks!
~kim
|
by: Leythos |
last post by:
I have a site at http://www.bhlnet.net/opep, it's template site for
testing, it uses roll-over images that are setup/controlled by javascript.
I've just noticed that the pages seem to be stuck with READ/Waiting in the
status message. When I use IE I don't see the READ/Waiting.
If I remove the js I don't see it, if I refresh the page and...
|
by: TK |
last post by:
What's the best way to implement roll-base access control with forms
authentication?
I have a IIS6+ASP.NET server which hosts some ASP.NET web applications as
separated path that's like "/app1/default.aspx", "/app2/default.aspx", ....
and a single logon page as "/logon/logon.aspx" for forms authentication.
I've already implemented "single...
|
by: pozz |
last post by:
Hi all,
I need to write a simple incrementing/decrementing function like this:
unsigned char
change( unsigned char x, unsigned char min, unsigned char max, signed char d);
x is the value to increase/decrease
min is the minimum value that x can assume
max is the maximum value that x can assume
|
by: Dan |
last post by:
Hello,
I have been working on a problem for a day now and am spinning my
wheels. What is the easiest way to add two sets of roll/pitch/yaw
angles? For example, an airplane is at 25deg pitch, 0 deg roll, and a
heading of 90 degrees, and the pilot is wearing a head mounted display
that is independent of the airframe.
Tried transformation...
| |
by: HC |
last post by:
In my subforms (in Access 2003) the mousewheel will only roll down in
my subforms if there is not so many records. If a subform - (continous
form) has a lot of records it is not a problem!
When I try to roll up - nothing happenes. To see the first records in
my subform I need to click the scrollbar or use Shift+Tab.
To me it seems like a...
|
by: lenest |
last post by:
I need help writing a program....
You are to write a python program to accomplish the following:
a.. Play a dice game of Craps using a random number generator to simulate
the roll of the dice, the code for the rolling of the dice should take place
in a user written module named rolldice.
b.. The rules of the game are as follows:
|
by: elma.arsalan |
last post by:
Hello:
Does anyone know whether it is possible to roll back MS Access
database without loosing any data? Or can a roll back be undone (kinda
odd).
Any comment would be appreciated.
|
by: clairelee0322 |
last post by:
Hello guys again!
I am a C++ beginner and I am working on another project.. It's called Dice Lab with Loops..
unforunately I don't even know how to start the program....
Don't blame me for not pay attention in the class.. Seriously, my teacher just ask us to do the sample programs in the textbook and prepare for the finals...
Everytime I ask...
|
by: sonia.sardana |
last post by:
create table student7(Roll int,English int,Hindi int,Maths int)
insert into student7 values(1,12,15,9)
insert into student7 values(2,23,3,13)
insert into student7 values(3,15,12,4)
select roll from student7 where
maths=(select min(maths) from student7)
AND
English=(select min(english)from student7)
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
| |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert...
| |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |