Hi Everyone,
I am wanting to create a redirector on my server so that if I type in
something like 'mysite.com/redirect/target' it would look into my database
and see entry for 'target' and forward to that url.
How do I do this? I put a default.asp file in my redirect url, however,
trying to hit redirect/target tries process that url rather than read the
default.asp and the first off to my target.
One way to do this would be to put redirect?target but from a mailshot this
isn't very nice.
Any ideas how I can achieve this?
Many thx
Stuart
5  1543 
Stuart Palmer wrote: I am wanting to create a redirector on my server so that if I
type in something like 'mysite.com/redirect/target' it would look
into my database and see entry for 'target' and forward to that url.
How do I do this? I put a default.asp file in my redirect url,
however, trying to hit redirect/target tries process that url rather
than read the default.asp and the first off to my target.
One way to do this would be to put redirect?target but from a
mailshot this isn't very nice.
Any ideas how I can achieve this?
Custom 404 handler in your /redirect folder.
--
Dave Anderson
Unsolicited commercial email will be read at a cost of $500 per message. Use
of this email address implies consent to these terms. Please do not contact
me directly or ask me to contact you directly for assistance. If your
question is worth asking, it's worth posting.
Thx Dave, I have tried this, however, the default 404 asp page doesn't seem
to process the page as expected, it ignores all ASP code.
Is there a setting I need to alter in IIS or set in the file perhaps?
Thx
Stu
Stuart Palmer wrote: Thx Dave, I have tried this, however, the default 404 asp page
doesn't seem to process the page as expected, it ignores all ASP code.
Are you following the guidelines here? http://aspfaq.com/show.asp?id=2162
Note that those instructions are for the web root, but you can likewise
customize any folder or application under the root.
--
Dave Anderson
Unsolicited commercial email will be read at a cost of $500 per message. Use
of this email address implies consent to these terms. Please do not contact
me directly or ask me to contact you directly for assistance. If your
question is worth asking, it's worth posting.
Thx dave, looks like ot need to speak to my host to set up that url param on
the server for me.
Cheers
Stu
Stuart Palmer wrote on 17 feb 2005 in
microsoft.publi c.inetserver.as p.general: Thx dave, looks like ot need to speak to my host to set up that url
param on the server for me.
Please include essential part of the posing you are replying on,
or use [private] email.
Is your text from the "Stargate series"? ;-}
--
Evertjan.
The Netherlands.
(Replace all crosses with dots in my emailaddress) This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Bob Garbados |
last post by:
forgive my ignorance, as I'm new to php coming from a ms background...
If I create a page named redirect.php and it's only content is:
<?php
header("Location: http://www.google.com");
?>
Should it not redirect to www.google.com? I can't get the header()
function to redirect.
I'm trying to take an online reservation... the customer fills out
|
by: Paul |
last post by:
I'm not getting the results I want when I use
Response.Redirct in a ASP page.
I enter this line of code in a asp page from domain1.com.
Response.Redirect "http://www.domain2.com/VDIR2/table.asp"
& "?PubID=" & PubID & "&PubName=" & PubName
The query string is data to open a DB. the page displays
|
by: Donna Hawkins |
last post by:
I want to use javascript to redirect to a URL which has been passed
as a variable (in php).
I have searched but cannot find any solution.
I think this code is a basic redirect:
<script type="text/javascript">
window.location = "http://www.someserver.com/somePage.html";
</script>
|
by: Peter Kirk |
last post by:
Hi there
I have a program written by another company (it's a "web control" which
returns a web-page: can I compare this to a servlet in the Java world?),
which they think is causing problems on their server.
But no-one really knows if this program is at fault because the problem only
exhibits itself every once and a while, and the only thing they can see is
that their web-users suddenly stop receiving responses.
|
by: Mark Dengler |
last post by:
Is it possible to do a Response.Redirect to multiple URLs?
I have tried the following and it simply ignores the first redirect:
Response.Redirect("test.aspx", false);
Response.Redirect(p.UrlSend, true);
I have designed the test.aspx page to simple write a cookie, just to
see if it is working and it is not. I have also used to VS.Net
| | |
by: Justin |
last post by:
Hi,
Im confused here over the usage of Response.Redirect and
Server.Transfer. I used frameset for my work, what are the
proper usages of the two methods that seems working
similar..
The problem i faced while using Response.Redirect is that
the page that is directed to, does not looks as
desired..the textboxes are not visible anymore and so as
|
by: Sam |
last post by:
I have some issues with HTTP Headers and I was hoping for
some pointers or references to good articles.
Here is the problem.
I have 6 .aspx pages, each page contains a common .ascx.
This ascx serves two purposes, 1. it contains a tab strip
with response.redirects to navigate to the other pages;
2. I authenticate the user by check to see if a cookie
exists, if it doesn't I redirect to a login screen.
|
by: Peter Row |
last post by:
Hi,
I am writing a DLL in VB.NET that implements IHttpHandler.ProcessRequest.
This code calls a sub and I need to know if that sub did a response redirect
or not.
Specifically I need to know that either the sub did a redirect or a specific
value
was specified in the URL. If neither a redirect was done and a certain value
was
|
by: venner |
last post by:
I'm having an issue with an ASP.NET website after upgrading to ASP.NET
2.0. The website makes use of a central authentication service (CAS)
provided at the university I work for. Each page checks a session
variable, and if it is not present, does a Response.Redirect to a
webpage for the CAS passing a url parameter for the url to post back
to. The CAS provides a page for the user to log into, validates the
username and password, and then...
|
by: Eirik Eldorsen |
last post by:
How can I 301 redirect www.example.com/default.aspx to www.example.com
without using ISAPI filters?
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
| | |
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
