Hello,
I am using Access 2002 to track payroll. I am trying to carry a
person's Sick time accrued into the next record for an individual. I
am a beginner with access.
I am using the following terms:
SickUsed: Sick time used in a given pay period. (Cannot exceed
SickAccumulated )
SickAccumulated : SickAccumulated through previous month minus SickUsed
(A person can only use sick time accumulated through previous
payperiod)
SickEarned: TotalHours Divided by 79.9 or if TotalHours is greater
than or equal to 80, then SickEarned is 4
SickBalance: SickAccumulated Plus SickEarned minus SickUsed (Current
Month)
Here is my main question: I want the SickBalance from the current
record to become SickAccumulated when a new payroll record is entered
for a person. Is there a way to make Access do this?
Thank you,
Kgatchell2001 1 1917
This is possible but not for the light heated. To do this, you need to
setup a field that is a counter, but the counter cannot miss any. To
complex things further, you will need have the counter reset for each
employe. For example:
Employee 1 Rec 1
Employee 1 Rec 2
Employee 1 Rec 3
Employee 1 Rec 4
Employee 2 Rec 1
Employee 2 Rec 2
Employee 2 Rec 3
Employee 2 Rec 4
There is no built-in function to do this. This can be accomplished via
VBA. Since you are wanting to store the results, your balance forward
calculation all use domain aggregate functions. Would not take me long to
do though.
You might look at doing this on a query. Group on employee, sum the
accrued column, sum the usage column, Accrued - Used, and so on.
--
Dean Covey www.coveyaccounting.com
"kgatchell2 001" <kg***********@ yahoo.com> wrote in message
news:b2******** *************** ***@posting.goo gle.com... Hello,
I am using Access 2002 to track payroll. I am trying to carry a person's Sick time accrued into the next record for an individual. I am a beginner with access.
I am using the following terms:
SickUsed: Sick time used in a given pay period. (Cannot exceed SickAccumulated )
SickAccumulated : SickAccumulated through previous month minus SickUsed (A person can only use sick time accumulated through previous payperiod)
SickEarned: TotalHours Divided by 79.9 or if TotalHours is greater than or equal to 80, then SickEarned is 4
SickBalance: SickAccumulated Plus SickEarned minus SickUsed (Current Month)
Here is my main question: I want the SickBalance from the current record to become SickAccumulated when a new payroll record is entered for a person. Is there a way to make Access do this?
Thank you,
Kgatchell2001 This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: zexx |
last post by:
Need some advise....
Payroll program Access97. Payroll is printed then posted to a hx table thro'
a query with the payroll calculations that freeze that payroll's numbers for
that period.
The weekly payroll period reports are produced from the Payroll table by
queries that are linked to the Employee details table...salary, base rate,
lead rate, wh allowances, status etc...so this is real time data with the
current information in the...
|
by: kgatchell2001 |
last post by:
Hello,
I am using Access 2002 to track payroll. I am trying to carry a
person's Sick time accrued into the next record for an individual. I
am a beginner with access.
I am using the following terms:
SickUsed: Sick time used in a given pay period. (Cannot exceed
SickAccumulated)
|
by: kgatchell2001 |
last post by:
Hi, I am a beginner working on a database to manage clients, payroll,
station assignments, etc. I am having difficulty with sick pay
variables.
I use the following variables;
SickUsed: Sick time used in a given pay period. (Cannot exceed
SickAccumulated) This term is entered by the user
SickAccumulated: SickAccumulated through previous month minus SickUsed
|
by: cheungs7 |
last post by:
Hi all,
Wondering whether you can anyone help me. We have Sage Payroll (and
accounting/payroll software), which has a MS Access database where the data
is stored.
Now I want to access the data in this database but whenever I do (without
using the Sage payroll client application) I get a permission problem. Now
I have the correct username and password, and I tried importing it in a new
Access database, but with no luck. Maybe I'm...
|
by: tshad |
last post by:
Is there a way to carry data that I have already read from the datagrid from
page to page?
I am looking at my Datagrid that I page through and when the user says get
the next page, I have to go to the database to get the next page. Is there
a way to use the dataset to allow us to read back and forth in it instead of
going back to the database to get it?
Thanks,
| |
by: Akinyemi |
last post by:
I am developing a payroll program.. The data generated will be saved in an Access Database. I want a situation whereby when an employee leaves the organization or retires, instead of deleting his name from the Payroll it is made INACTIVE. This is to ensure that his/her name does not appear in subsequent payroll.
|
by: John Sitka |
last post by:
Hi,
There are four pay types
standard
shiftpremium
doubletime
doubletimepremium
each hour a person books can be one of these types
|
by: elaina |
last post by:
Hello again.
I have setup a master form linked to a subform (actually nested subforms, but the top level subform is the one giving me trouble.) When entering data, the forms all appear to work correctly, but the moment that you change the record in the parent/master form, the forms "lose" all of the data we enter from the subforms. Upon examination of the tables, I found that the master key is not being populated into the top level subform,...
|
by: isoquin |
last post by:
I have frmMain that takes in data about a particular event. Payroll information needs to be automatically calculated from this, but is stored in a different table. So, I included a subform frmPay, to remain hidden (as the user shouldn't be able to access it directly).
When the user puts in the length of time into frmMain, I can round it to the nearest 15 minutes just fine for frmPay. Now, when I want to multiply those hours by their hourly...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |