I have just posted a variation of this question on the Crystal Reports
board, but most times I do not get a reponse.
I have a report in which I asked about yesterday and after working all day
on this, I actually have it looking pretty good. It is displaying header
information and listing the data that I want it to in various sub reports.
The problem that I am having is that the sum of the rows in the subreports,
it is printing one form for each and I really only need this printed once.
Like if subreport #1 shows 2 rows and then subreport #4 shows 10 rows, I get
12 pages.
I understand that it is printing a form for each record that is selected,
but I am wonder how to just have it do one.
Thanks for any help.
Brad
3  1181 
Do you have "Start New Page After" checked in one or more of your report
footers?
"Brad" wrote: I have just posted a variation of this question on the Crystal Reports
board, but most times I do not get a reponse.
I have a report in which I asked about yesterday and after working all day
on this, I actually have it looking pretty good. It is displaying header
information and listing the data that I want it to in various sub reports.
The problem that I am having is that the sum of the rows in the subreports,
it is printing one form for each and I really only need this printed once.
Like if subreport #1 shows 2 rows and then subreport #4 shows 10 rows, I get
12 pages.
I understand that it is printing a form for each record that is selected,
but I am wonder how to just have it do one.
Thanks for any help.
Brad
"Brad" <ba******@ukcdo gs.com> wrote in message
news:Oh******** ********@TK2MSF TNGP15.phx.gbl. .. I have just posted a variation of this question on the Crystal Reports
board, but most times I do not get a reponse.
I have a report in which I asked about yesterday and after working all day
on this, I actually have it looking pretty good. It is displaying header
information and listing the data that I want it to in various sub reports.
The problem that I am having is that the sum of the rows in the
subreports, it is printing one form for each and I really only need this
printed once. Like if subreport #1 shows 2 rows and then subreport #4
shows 10 rows, I get 12 pages.
I understand that it is printing a form for each record that is selected,
but I am wonder how to just have it do one.
Thanks for any help.
Brad
I'm a little unclear on what's happening.
So you have a main report and you have a subreport which should only come
out once and give some sort of global totals?.
The obvious cause could be if you stuck the subreport in the detail band
rather than some sort of sort or report footer.
Sorry if that's too obvious.
--
Regards,
Andy O'Neill
Andy,
Thanks for the explaination and I think that is the problem. Obviously I am
really new to Crystal Reports. I am in the process right now of moveing
everything to the group footer and that is what seems to have been the
problem.
Brad
"Andy O'Neill" <ao************ ***@lycos.co.uk > wrote in message
news:%h******** ***********@fe2 .news.blueyonde r.co.uk...
"Brad" <ba******@ukcdo gs.com> wrote in message
news:Oh******** ********@TK2MSF TNGP15.phx.gbl. ..I have just posted a variation of this question on the Crystal Reports
board, but most times I do not get a reponse.
I have a report in which I asked about yesterday and after working all
day on this, I actually have it looking pretty good. It is displaying
header information and listing the data that I want it to in various sub
reports.
The problem that I am having is that the sum of the rows in the
subreports, it is printing one form for each and I really only need this
printed once. Like if subreport #1 shows 2 rows and then subreport #4
shows 10 rows, I get 12 pages.
I understand that it is printing a form for each record that is selected,
but I am wonder how to just have it do one.
Thanks for any help.
Brad
I'm a little unclear on what's happening.
So you have a main report and you have a subreport which should only come
out once and give some sort of global totals?.
The obvious cause could be if you stuck the subreport in the detail band
rather than some sort of sort or report footer.
Sorry if that's too obvious.
--
Regards,
Andy O'Neill
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: rAGHU |
last post by:
Hi,
In my ASP.NET web application project we need to design
crystal reports with Crystal Reports version 8.5
enterpraise edition(Please Note:It is not the Crystal
Reports that comes with VisualStudio.NET). Also the
Crsyatl Report software 8.5 version will not be installed
in the IIS web server which is hosting my ASP.NET web
application. It will be installed in a different server
which has .net and IIS 5.0.
|
by: Stephan |
last post by:
Hi,
I'm using Visual Studio 2003 (C#) with the integrated
Crystal Report software and have the following question:
How can I assign a value (string) to an unbound (string)
field in Crystal Report at runtime?
Example:
private void button1_Click(object sender,
|
by: Ashish Shridharan |
last post by:
Hi All,
I'm not very sure if this is the forum for my question but
i was hoping someone could direct me to the right place
(or answer my question).
I am using the .NET crystal report viewer to display
reports (crystal reports) in HTML in my web application.
My client's requirements are that the reports need to be
viewable on Netscape, Mozilla and IE. However, in Netscape
|
by: Phil |
last post by:
There's a Crystal Reports hot fix for a particular but
that I am experiencing in .NET -- DIV's get screwed up
when you embed a Crystal Report in a web page. The bug
is ADAPT00170558, the patch is 35395142.
There's absolutely no documentation on a work-around, and
the patch from CR is for version 9 only, not for .NET.
Anyone know how to fix this aweful problem?
Phil
|
by: Joriz |
last post by:
Obviously im new with ms access..so my basic question is how do i run
crystal reports in my ADP. I also pass parameters to cyrstal reports.
Please help!
thanks in advance
| | |
by: LP |
last post by:
Hi,
I will be taking on a new project developing a web-based "reporting system".
The first requirement I got from BI group is "we just want to look at the
data". Basically, there is a huge database, and they want certain people to
be able to drill down to the data they want, perhaps a few graphs here and
there, and then extract selected data to an Excel file or a flat file for
further analysis. As of now there are a handful of parameters...
|
by: LP |
last post by:
I am using (trying to) CR version XI, cascading parameters feature works it
asks user to enter params. But if page is resubmitted. It prompts for params
again. I did set ReuseParameterValuesOnRefresh="True" in a viewer, but it
still doesn't work. Did anyone run into this problem. What's the solution?
Please help.
Thank you
|
by: Peter Proost |
last post by:
Hi Group,
I've got an interesting problem, I don't know if this is the right group but
I think so because everything I've read about it so far says it's a .net
problem. Here's the problem, we're using crystal reports 9 and vb.net and
we're using the crystalrepotViewer to show our reports. But every time we
open a report the connection to or sql server remains, so if I open 5 forms
with the report viewer I've got 5 sleeping connections in...
|
by: Jay |
last post by:
I am getting mixed messages from the asp.net website hosting providers - some
say they do not support Crystal Reports due to a $25,000 per cpu licensing
fee, others say all I need to do is install Crystal Reports XI (about $500)
on a dedicated server and it will run fine.
Will Reports developed with the embeded Crystal Reports in VS 2005 run in a
Crystal Reports XI environment?
--
Thanks
|
by: =?Utf-8?B?VGVycnk=?= |
last post by:
I am brand new to using Crystal Reports and am trying to generate a report
based on a custom object - in another project. I have a layered design, with
all my business objects in a seperate project. I created a new project as
part of the solution, added a reference to the project containing my business
objects, created a datasource that points to one of the objects and then
tried to create CR based on the object. The data tab (in the CR...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
