Hello,
I am using a beginners book on VB .net and already stumped....when using
this code (below) , it will tell me that MsgBox is not valid. This is a very
simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class 6 1428
MsgBox has changed in VB.NET it is now: MessageBox.Show ("")
Hope this helps
Matt.
"Brian" <br***********@ yahoo.com> wrote in message
news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
That's interesting because in an application I made before using this book,
MsgBox worked and this book seems to use MsgBox throughout and it is a
VB.NET book.
"Matt S" <ma**@toomuchsp amalready.com> wrote in message
news:OP******** ********@tk2msf tngp13.phx.gbl. .. MsgBox has changed in VB.NET it is now: MessageBox.Show ("")
Hope this helps
Matt.
"Brian" <br***********@ yahoo.com> wrote in message news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
MsgBox is a VB function and is still valid in VB .NET. However, this
function requires importing the Microsoft.Visua lBasic namespace. By default,
this namespace is added to all newly created projects. (Project -->
myproject properties --> Common Properties --> Imports). So you should be
able to use this function by default. If its throwing up an error, you might
want to check whether you have the namespace included. However, as Matt
suggested, you might want to use MessageBox.Show instead (I believe it has
more options).
hope that helps..
Imran.
"Brian" <br***********@ yahoo.com> wrote in message
news:uy******** ********@tk2msf tngp13.phx.gbl. .. That's interesting because in an application I made before using this
book, MsgBox worked and this book seems to use MsgBox throughout and it is a VB.NET book.
"Matt S" <ma**@toomuchsp amalready.com> wrote in message news:OP******** ********@tk2msf tngp13.phx.gbl. .. MsgBox has changed in VB.NET it is now: MessageBox.Show ("")
Hope this helps
Matt.
"Brian" <br***********@ yahoo.com> wrote in message news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when
using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
what is the *exact* message u r getting ?
msgbox() DOES exist in VB.NET
"Matt S" <ma**@toomuchsp amalready.com> a écrit dans le message de news:
OP************* ***@tk2msftngp1 3.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show ("")
Hope this helps
Matt.
"Brian" <br***********@ yahoo.com> wrote in message news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
It gives me the squiggly underline and says:
"MsgBox is a namespace, and so it is not a valid expression"
But when I open a previous solution with MsgBox it doesn't give me this
error..suggesti ons?
"steve" <noemail.@try.c om> wrote in message
news:Gr******** ***********@web er.videotron.ne t... what is the *exact* message u r getting ?
msgbox() DOES exist in VB.NET
"Matt S" <ma**@toomuchsp amalready.com> a écrit dans le message de news: OP************* ***@tk2msftngp1 3.phx.gbl... MsgBox has changed in VB.NET it is now: MessageBox.Show ("")
Hope this helps
Matt.
"Brian" <br***********@ yahoo.com> wrote in message news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class
had a "duh" moment...the book made you name the solution the same as MsgBox
and that is a no no..figured it out.
Thanks!
"Brian" <br***********@ yahoo.com> wrote in message
news:%2******** ********@TK2MSF TNGP09.phx.gbl. .. Hello,
I am using a beginners book on VB .net and already stumped....when using this code (below) , it will tell me that MsgBox is not valid. This is a very simple program and I can't figure out what the problem is:
Public Class Form1
Inherits System.Windows. Forms.Form
#Region " Windows Form Designer generated code "
Public Sub New()
MyBase.New()
'This call is required by the Windows Form Designer.
InitializeCompo nent()
'Add any initialization after the InitializeCompo nent() call
End Sub
'Form overrides dispose to clean up the component list.
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Disp ose()
End If
End If
MyBase.Dispose( disposing)
End Sub
'Required by the Windows Form Designer
Private components As System.Componen tModel.IContain er
'NOTE: The following procedure is required by the Windows Form Designer
'It can be modified using the Windows Form Designer.
'Do not modify it using the code editor.
<System.Diagnos tics.DebuggerSt epThrough()> Private Sub InitializeCompo nent()
'
'Form1
'
Me.AutoScaleBas eSize = New System.Drawing. Size(5, 13)
Me.ClientSize = New System.Drawing. Size(292, 266)
Me.Name = "Form1"
Me.Text = "Form1"
End Sub
#End Region
Private Sub Form1_Load(ByVa l sender As System.Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
MsgBox("Hi There")
End
End Sub
End Class This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Patchwork |
last post by:
Hi Everyone,
Please take a look at the following (simple and fun) program:
////////////////////////////////////////////////////////////////////////////
/////////////
// Monster Munch, example program
#include <list>
|
by: Proteus |
last post by:
Any help appreciated on a small perl project I need to write for
educator/teaching purposes. I have not programmed perl for some time, need
to get up to speed, maybe some kind souls hrere will help me on
this project? It looks to be a simple project, and I will start relearning
pearl, but any help appreciated!
I need to read and parse a simple text file (INPUT) containing multiple
choice quiz questions (with titles) and answers, and...
|
by: Raskolnikow |
last post by:
Hi!
I have a very simple problem with itoa() or the localtime(...).
Sorry, if it is too simple, I don't have a proper example.
Please have a look at the comments.
struct tm *systime;
time_t currentTime;
char day;
char month;
|
by: Peter |
last post by:
Hello
Thanks for reviewing my question. I would like to know how can I programmatically select a node
Thanks in Advanc
Peter
|
by: abcd |
last post by:
I am trying to set up client machine and investigatging which .net
components are missing to run aspx page.
I have a simple aspx page which just has "hello world" printed....
When I request that page like http://machinename/dir1/hellp.aspx
instead of running that page it starts downloding ...whats missing here
....why the aspx engine not running the page....
| |
by: dba_222 |
last post by:
Dear Experts,
Ok, I hate to ask such a seemingly dumb question, but I've
already spent far too much time on this. More that I
would care to admit.
In Sql server, how do I simply change a character into a number??????
In Oracle, it is:
|
by: Giancarlo Berenz |
last post by:
Hi:
Recently i write this code:
class Simple
{
private:
int value;
public:
int GiveMeARandom(void);
|
by: galiorenye |
last post by:
Hi,
Given this code:
A** ppA = new A*;
A *pA = NULL;
for(int i = 0; i < 10; ++i)
{
pA = ppA;
//do something with pA
|
by: Phillip Taylor |
last post by:
Hi guys, I'm looking to develop a simple web service in VB.NET but I'm
having some trivial issues. In Visual Studio I create a web services
project and change the asmx.vb file to this:
Imports System.Web.Services
Imports System.Web.Services.Protocols
Imports System.ComponentModel
<System.Web.Services.WebService(Namespace:="http://
wwwpreview.#deleted#.co.uk/~ptaylor/Customer.wsdl")_
|
by: Chris M. Thomasson |
last post by:
I use the following technique in all of my C++ projects; here is the example
code with error checking omitted for brevity:
_________________________________________________________________
/* Simple Thread Object
______________________________________________________________*/
#include <pthread.h>
extern "C" void* thread_entry(void*);
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |