Hello,
I am having a problem showing data in a form textbox which
is bound to a column in a table in a dataset. I have
successfully established a connection to an Access mdb,
successfully created the oledbadapter and successfully
created the dataset object. The table in the mdb is
tbl1. I named tbl1 as dtTbl1 in the dataset object ds1
and a field called fld1 as dcfld1. I can loop through the
dataset and see my data in the console window. So on the
form load event I say this:
Private sub Form_Load(...)
ds1.Clear()
oledbda1.Fill(d s1, "tbl1")
Me.BindingConte xt(ds1, "tbl1").Positio n = 0
End Sub
For the textbox, txt1 I go to the properties to
DataBinding, select ds1, tbl1, dcfld1 and press enter. So
when the form loads, shouldn't the data from the first row
first column appear in txt1? I am not seeing anything.
Any suggestions appreciated on what else I need to do to
make the data appear in txt1 based on databinding.
Thanks,
Rich 5 1505
Hi Rich,
Did you see the message I have sended this morning (my time) in your
original thread?.
Cor I am having a problem showing data in a form textbox which is bound to a column in a table in a dataset. I have successfully established a connection to an Access mdb, successfully created the oledbadapter and successfully created the dataset object. The table in the mdb is tbl1. I named tbl1 as dtTbl1 in the dataset object ds1 and a field called fld1 as dcfld1. I can loop through the dataset and see my data in the console window. So on the form load event I say this:
>>
Hi Sarah and also for Rich,
\\\
dim cma As CurrencyManager
cma = CType(BindingCo ntext(dataset1. Tables(0)),
CurrencyManager )
textbox1.DataBi ndings.Add(New Binding("Text",
dataset1.Tables (0),
"LastName") )
///
I hope this helps
Cor
<<
Thank you. So if I type this code in my form load event
(assuming I have a textbox named "lastname") when I load
the form would data show up in the textbox automatically?
I believe the functionality is supposed to be the same as
if you bind a form/field in an Access mdb to a table.
When you load the form, the data shows up automatically in
Access. I noticed that in the code (generated by VS.net)
it already has something like
textbox1.DataBi ndings.Add(New Binding("Text",
dataset1.Tables (0),
"LastName")
So if I type your code in the form load event will the
form act the same as a bound form in Access?
Thank you for your information. -----Original Message----- Hi Rich,
Did you see the message I have sended this morning (my
time) in youroriginal thread?.
Cor
I am having a problem showing data in a form textbox
which is bound to a column in a table in a dataset. I have successfully established a connection to an Access mdb, successfully created the oledbadapter and successfully created the dataset object. The table in the mdb is tbl1. I named tbl1 as dtTbl1 in the dataset object ds1 and a field called fld1 as dcfld1. I can loop through
the dataset and see my data in the console window. So on
the form load event I say this:
.
Hi Rich,
I thought let make a complete sample with a textbox, I had only a sample
with a combobox.
(I have deleted some things about the dataset again from my sample)
And before I forget it, that Lastname is not your textbox, but your database
Item, here as A.
I hope this helps a little bit?
Cor
\\\
Private cma As CurrencyManager
Private Sub Form1_Load(ByVa l sender As Object, _
ByVal e As System.EventArg s) Handles MyBase.Load
---------------
cma = CType(BindingCo ntext(ds.Tables (0)), CurrencyManager )
textbox1.DataBi ndings.Add(New Binding("Text", ds.Tables(0), "A"))
End Sub
Private Sub mybuttonup(ByVa l sender As Object, _
ByVal e As System.EventArg s)
If cma.Position < ds.Tables(0).Ro ws.Count - 1 Then
cma.Position += 1
End If
End Sub
Private Sub mybuttondown(By Val sender As Object, _
ByVal e As System.EventArg s)
If cma.Position > 0 Then
cma.Position -= 1
End If
End Sub
////
Thank you very much for your help. I will try this out
and post back how it worked (tonight).
Rich -----Original Message----- Hi Rich,
I thought let make a complete sample with a textbox, I
had only a samplewith a combobox. (I have deleted some things about the dataset again from
my sample) And before I forget it, that Lastname is not your
textbox, but your databaseItem, here as A.
I hope this helps a little bit?
Cor
\\\ Private cma As CurrencyManager Private Sub Form1_Load(ByVa l sender As Object, _ ByVal e As System.EventArg s) Handles MyBase.Load --------------- cma = CType(BindingCo ntext(ds.Tables (0)), CurrencyManager ) textbox1.DataB indings.Add(New Binding("Text", ds.Tables
(0), "A"))End Sub Private Sub mybuttonup(ByVa l sender As Object, _ ByVal e As System.EventArg s) If cma.Position < ds.Tables(0).Ro ws.Count - 1 Then cma.Position += 1 End If End Sub Private Sub mybuttondown(By Val sender As Object, _ ByVal e As System.EventArg s) If cma.Position > 0 Then cma.Position -= 1 End If End Sub ////
.
That did the trick! Thanks very much.
----- Rich wrote: -----
Thank you very much for your help. I will try this out
and post back how it worked (tonight).
Rich -----Original Message----- Hi Rich,I thought let make a complete sample with a textbox, I
had only a samplewith a combobox. (I have deleted some things about the dataset again from
my sample)And before I forget it, that Lastname is not your
textbox, but your databaseItem, here as A.I hope this helps a little bit? Cor\\ >Private cma As CurrencyManager Private Sub Form1_Load(ByVa l sender As Object, _ ByVal e As System.EventArg s) Handles MyBase.Load --------------- cma = CType(BindingCo ntext(ds.Tables (0)), CurrencyManager ) textbox1.DataB indings.Add(New Binding("Text", ds.Tables
(0), "A"))End Sub Private Sub mybuttonup(ByVa l sender As Object, _ ByVal e As System.EventArg s) If cma.Position < ds.Tables(0).Ro ws.Count - 1 Then cma.Position += 1 End If End Sub Private Sub mybuttondown(By Val sender As Object, _ ByVal e As System.EventArg s) If cma.Position > 0 Then cma.Position -= 1 End If End Sub ////. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Mark |
last post by:
Can I bind datagrid to an xml string (not to file)? For example, the result of transformation?
|
by: AFN |
last post by:
I need to manually create the data to be shown in a datagrid (or some data
table object). Should I create an array and bind the array to the
datagrid OR should I create a temporary dataset and bind that to the
datagrid? I have never done either (usually I get a recordset from a
stored procedure and bind results directly). I also don't know which is
faster. Whichever you suggest, can you give a couple lines of sample code?
Thank...
|
by: Bob Clegg |
last post by:
I am in the same boat as Moondog on the 2nd July.
I have a report designed against a dataset.
Proved the datasset is OK by dropping a datagrid onto the form and it binds
OK to the data.
But the report is empty (except for headers). My method is similar to
Moondog except the dataset is based on a SProc.
The dataset is instantiated in FormA, passed to a DataHandling class which
fills it. by executing the SProc
it is then passed to the...
|
by: Michael via .NET 247 |
last post by:
I have a datagrid with the columns defined in the aspx
<columns>
<asp:TemplateColumn HeaderText="Hours" ItemStyle-Width="1%"ItemStyle-HorizontalAlign="Center">
<ItemTemplate>
<asp:TextBox Columns="2" EnableViewState="False" ID="Hours"Runat="server"></asp:TextBox>
</ItemTemplate>
</asp:TemplateColumn>
...
</columns>
|
by: A_PK |
last post by:
I have problem databinding the DataGrid with DataView/DataSet after the
filter...
I create the following proceudre in order for user to filter as many as they
want, but the following code is only allow user to filter the first time,
when they tried the second time, the speficied cast error message will
prompt one....
I create a mydataset1 first, and the mydataset1 data source was getting from
DataGrid.DataSource.
| |
by: serge calderara |
last post by:
Dear all,
Does anyone know how to bind a System.Collection.ArraysList object to a
Dataset ?
Thanks for your reply
Regards
Serge
|
by: Steve |
last post by:
C#
I have some combo boxes, full of lookup descriptions. When I retrieve a
dataset for my record, the values that need binding to the combos are the
actual record IDs that relate to these lookup descriptions. How do I bind
them up in this case?
Thanks
Steve
|
by: cipcip |
last post by:
hi,
is there a way to bind a menu control with a dataset without get this
error?
System.InvalidOperationException: HierarchicalDataBoundControl only
accepts data sources that implement IHierarchicalDataSource or
IHierarchicalEnumerable.
I've tryed this , but it doesn't render correctly and write the menu
|
by: lanmou |
last post by:
hi,
i am creating a form in my application which dynamically creates controls by getting information from a table in ms access database .now i would like it to get the text by using another table .
my code:
Private Sub frmDataEntry_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim cn As New OleDbConnection("Provider=Microsoft.Jet.OleDb.4.0;Data Source=" & Application.StartupPath & "\customer.mdb")
...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |