hello,
I googled around some time but I found no solution for this issue
(SS2000).
I have a table tblB which has to be filled whenever in another table
tblA records are inserted, updated or deleted.
So I created one trigger which works fine for inserts and updates and
fills my tblB. tblB is filled with other fields which I get from a
view vwC.
The issue is about this view. When in tblA a record is deleted, the
corresponding record in vwC does not exist and I can't fill tblB. I
tried around with INSTEAD OF -Trigger and got error message because
tblA has RI cascades so this is not possible. A temp table could be
the right way? Can you show me an example?
thanks
--
candide_sh 1 1716
I believe you will have to do it without the view. You would need the
view to join the DELETED table to those other tables, and no view can
reference DELETED. In the trigger, in the FROM clause, replace the
reference to the view with a derived table using the same SELECT as
the view. So instead of:
FROM ViewName
you will need
FROM (<SELECT.....> ) as ViewName
Note that if you have an alias assigned to the view reference that
would go after the "as" rather than ViewName.
Roy Harvey
Beacon Falls, CT
On Tue, 17 Jul 2007 08:04:59 -0700, ca********@yaho o.de wrote:
>hello, I googled around some time but I found no solution for this issue (SS2000).
I have a table tblB which has to be filled whenever in another table tblA records are inserted, updated or deleted. So I created one trigger which works fine for inserts and updates and fills my tblB. tblB is filled with other fields which I get from a view vwC.
The issue is about this view. When in tblA a record is deleted, the correspondin g record in vwC does not exist and I can't fill tblB. I tried around with INSTEAD OF -Trigger and got error message because tblA has RI cascades so this is not possible. A temp table could be the right way? Can you show me an example?
thanks
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Matik |
last post by:
Hello to all,
I have a small question.
I call the SP outer the DB. The procedure deletes some record in table
T1.
The table T1 has a trigger after delete.
This is very importand for me, that the SP will be finished ASAP,
that's why, I do not want, and I do not need to wait for a trigger.
|
by: Scott CM |
last post by:
I have a multi-part question regarding trigger performance. First of
all, is there performance gain from issuing the following within a
trigger:
SELECT PrimaryKeyColumn FROM INSERTED
opposed to:
SELECT * FROM INSERTED
|
by: rkrueger |
last post by:
Given the following 3 Tables:
CREATE TABLE (
NOT NULL ,
NOT NULL CONSTRAINT
DEFAULT (getdate()),
NULL ,
CONSTRAINT PRIMARY KEY CLUSTERED
(
|
by: JohnO |
last post by:
Thanks to Serge and MarkB for recent tips and suggestions.
Ive rolled together a few stored procedures to assist with creating
audit triggers automagically. Hope someone finds this as useful as I've
found it educational.
Note:
- I build this for use in a JDEdwards OneWorld environment. I'm not
sure how generic others find it but it should be fairly generic.
- I use a C stored procedure GETJOBNAME to get some extra audit data,
|
by: R.Welz |
last post by:
Hello.
I want to discuss a problem I have with my database design becourse I
feel I cannot decide wheather I am on the right way of doing things.
First of all, I am writing a literature and magazine database with web
(PHP) and C++ Interface, serving over the web and in a very fast LAN.
So my concern is about performance (and aestaetic by doing the things
as optimal as possible.) This is my first database at all, but I have
read a lot of...
| |
by: Jchick |
last post by:
Im a newbie with a sql table in a MSDE database that contains fields of
CustName, BrokerName, Type, Status.
I am trying to write a trigger that does this:
1. When a new record in a table is added, I would like the selected
fields to be copied to another table (call it Master).
2. If that Master table already contains a record where the CustName =
CustName, then simply ignore. If CustName does not match anything, then
add the record to...
|
by: dean.cochrane |
last post by:
I have inherited a large application.
I have a table which contains a hierarchy, like this
CREATE TABLE sample_table(
sample_id int NOT NULL
parent_sample_id int NOT NULL
....lots of other cols...)
DELETEs on all tables are handled by the front end code, which just
|
by: Yas |
last post by:
Hi everyone
I am trying to create a DELETE Trigger. I have 2 tables. Table1 and
Table2. Table 2 has all the same fields and records as Table1 + 1
extra column "date_removed"
I would like that when a record is deleted from Table 1, the trigger
finds that record in Table2 and updates the date_removed filed with
current time stamp.
The primary key on both is combination of domain,admin_group and cn.
|
by: Oliver |
last post by:
I'm fairly new to DB2.
I have been assigned to build a delete trigger that finds the data
type of each of the table's fields so that the trigger can then build
a string consisting of OLD values pre-wrapped in quote marks as
needed. The deleted record's field values, all strung together as a
single string, would then be inserted into a single archiving table
(an architecture I inherited and cannot change).
I've got the trigger doing...
|
by: JohnO |
last post by:
Hi All,
This question is related to iSeries V5R4 and db2.
I want to implement an AFTER DELETE trigger to save the deleted rows
to an archive table, I initially defined it as a FOR EACH STATEMENT
trigger that would insert all the deleted rows in one operation like
this:
CREATE TRIGGER MyTable_TD
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |