Hello group,
I performed binary installs of Net-SNMP and PHP 4.4.4 on my Windows XP
laptop so that I can do some offline development/testing away from my Linux
server. Anyway, I attempted to do some SNMPv3 gets/sets and I am greeted
with "Encryption support not enabled" whenever I try and do any SNMPv3 call.
I thought it was Net-SNMP, so I did some googling and found that you need to
compile Net-SNMP from scrtach with OpenSSL support to get SNMPv3 to work. I
did, and I am now able to do SNMPv3 gets with Net-SNMP. However, I cannot
execute snmp3_get() from any of my PHP scripts, I get the above encryption
message.
I ran phpinfo() on my XP machine and on my linux server and the SNMP section
is quite different, my XP machine has support for "ucd-snmp-4.2.3" and my
linux server has support for "Net-SNMP-5.1.2"
Are there updated versions of php_snmp.dll for a Windows install of PHP? If
so, where can I get them and are they compatible with PHP 4?
Thank you in advance,
AJ Schroeder
1  2583 
Schroeder, AJ wrote:
Hello group,
I performed binary installs of Net-SNMP and PHP 4.4.4 on my Windows XP
laptop so that I can do some offline development/testing away from my
Linux server. Anyway, I attempted to do some SNMPv3 gets/sets and I
am greeted with "Encryption support not enabled" whenever I try and
do any SNMPv3 call.
I thought it was Net-SNMP, so I did some googling and found that you
need to compile Net-SNMP from scrtach with OpenSSL support to get
SNMPv3 to work. I did, and I am now able to do SNMPv3 gets with
Net-SNMP. However, I cannot execute snmp3_get() from any of my PHP
scripts, I get the above encryption message.
I ran phpinfo() on my XP machine and on my linux server and the SNMP
section is quite different, my XP machine has support for
"ucd-snmp-4.2.3" and my linux server has support for "Net-SNMP-5.1.2"
Are there updated versions of php_snmp.dll for a Windows install of
PHP? If so, where can I get them and are they compatible with PHP 4?
Thank you in advance,
AJ Schroeder
No one has an answer for this?
Shall I fill out a bug report or feature request on http://www.php.net? This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Kurt |
last post by:
Hi,
I tried to compile my php 4.3.9 with snmp support but it won't work.
Compiling Net-SNMP always worked good --> I tried the 5.2rc4 and also the
older version 5.1.2 successfully so far. I use Fedora Core 2.
Here's what I already tried with php (Every configure options version listed
below was tried with both of the two snmp versions):
../configure --with-openssl --with-apxs=/usr/local/apache/1.3.31/bin/apxs --w...
|
by: yair |
last post by:
hey
i need to send a message throw snmp for my java project. the message
should include two attributes: name and phone number.
i have 2 questions:
1. where can i find a sample mib so i can change it for my needs? or
can some1 plz send me a simple one?
2. i can't understand from java.sun.com if they have snmp support in
the j2sdk (or maybe in jmx) and how to use it (only the snmp part in
jmx, if there is any support for that there).
|
by: Matthew Bell |
last post by:
Hi,
I'm looking for a high-performance SNMP manager toolkit (SNMPv1 / v2,
GET / GETNEXT / GETBULK) I can use with Python on Windows2K/XP. I
wonder if anyone has got any suggestions? Commercial software is
fine, as it's for a specialised in-house application.
I've tried PySNMP which, while a fine piece of code (I've learnt a lot
looking through it!), it's fairly CPU intensive in my application.
I've also tried using UCDSNMP via...
|
by: Jeremy Sanders |
last post by:
Hi -
I'd like to write a program which basically does a few snmpgets. I haven't
been able to find a python package which gives you a nice high-level and
simple way of doing this (like PHP has). Everything appears to be
extremely low level. All I need is SNMPv1.
Does anyone know of a simple python package for doing this? I'd rather
have something written in pure python, so that it is easily cross-platform.
|
by: Jean-Marc Blaise |
last post by:
Dear all,
I've been looking for some info on the snmp support provided by DB2 UDB
V8.1. Just 1 line, and 2 references in the index, when the V7.1
Troubleshooting guide had a complete paragraph.
Can I presume the snmp support is offered by V8, and if yes, on which
platforms exactly - is it supported on Linux/Intel and Z ?
Btw, with what pdf did this usefull troubleshooting guide merge in V8.1 ?
| | |
by: vanisathish |
last post by:
Hi,
I need to develop a web-based NetworkManagement Software on windows
platform(planning to use ASP,HTML ). The Networking devices provide
support for SNMP.
Is there a way i can construct the SNMP PDUs from my ASP pages and get
response from the SNMP Agent ?
Can anyone suggest what would be the best approach for the WebNMS to
|
by: Deleo |
last post by:
Hello im writing a program that need to use snmp to communicate with other
devices.
Im having trouble finding any snmp support in .NET for c#, can anyone please
point a direction to where i might find it or give me a little code piece?
|
by: Rainer Queck |
last post by:
Hello NG,
I would greatly appreciate a code sample on how to connect to a SNMP device
using WMI.
Regards
Rainer Queck
|
by: Dirk Van de moortel |
last post by:
{
OOPS, posted this to moderated group perl.cpan.discuss as
well, so it can take a while to get through, if it gets through at all
Otherwise sorry for duplicate posting
}
We need to set up a server 2003 (or a win XP system) to accept
and act upon traps sent out from a storage system. Responding
to various error conditions, this system can be fully configured to
send traps.
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
