I have written some php scripts that use basic HTTP authentication as
described in the php manual. It works fine on my development server which
runs php as an apache module. But, the production server (Linux), which is
operated by a hosting service, has their php setup to run as a CGI
executable.
So, I'm trying to find out how hard it is to reconfigure to run as an apache
module as opposed to a CGI executable on a Linux server. If it's just a
matter of editing a couple configuration files, than maybe I can just do
that myself. If it requires a rebuild of php, then I may need to ask the
hosting service support to do it (if they will).
Is it just a matter of adding a few modules to httpd.conf, or is there more
to it? The php documentation seems to be more focused on describing complete
installation procedures, and not reconfiguration . 2 1575
"Bughunter" <no****@home.ne t> wrote: I have written some php scripts that use basic HTTP authentication as described in the php manual. It works fine on my development server which runs php as an apache module. But, the production server (Linux), which is operated by a hosting service, has their php setup to run as a CGI executable.
That shouldn't make a difference. What isn't working?
--
- Tim Roberts, ti**@probo.com
Providenza & Boekelheide, Inc.
Basic http authentication isn't working. It says in the documentation that
it is not supposed to work when php is running a as a CGI executable. So,
yes it does make a difference.
"Tim Roberts" <ti**@probo.com > wrote in message
news:s3******** *************** *********@4ax.c om... "Bughunter" <no****@home.ne t> wrote: I have written some php scripts that use basic HTTP authentication as described in the php manual. It works fine on my development server which runs php as an apache module. But, the production server (Linux), which is operated by a hosting service, has their php setup to run as a CGI executable.
That shouldn't make a difference. What isn't working? -- - Tim Roberts, ti**@probo.com Providenza & Boekelheide, Inc. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Ben |
last post by:
Hi all,
I used PHP installer binary to install PHP. Then I installed MySQL.
Now how do I reconfigure PHP to connect to MySQL? In PHP installer, it
does not provide any options for mysql support. Is it possible to do
it with PHP binary installer or do I need to reinstall PHP from source
code?
Hope someone can help me!
Thanx
|
by: Kim Gijung |
last post by:
Hi all,
I'm planning to make apache module.
I made php code. but it's too slow to handle requests for my project.
So i'm thinking if i replace php code to c and make apache module
then it maybe much faster.
upon above idea I have three questions.
1. Is it really worth to replace php code to c and make as apache
module?
|
by: Jay Haslup |
last post by:
I am trying to figure out how to get the CMD (dos) window to come up when I
call a executable. I have this working on a Win2000/apache machine and am
trying to use the same code on a identical machine.
Here is how I start the executable. It is initiated from the browser on the
machine itself:
pclose(popen("start " . $exe . $params, "r"));
What normally happens is a cmd window pops up showing the executable's
output to screen. My...
|
by: Ryan Riehle |
last post by:
Hi All!
Trying to upgrade to Apache 2.0.49 and getting compile errors related to
mod_auth_pgsql, any clue?:
make: Entering directory `/usr/src/httpd-2.0.49'
/usr/src/httpd-2.0.49/srclib/apr/libtool --silent --mode=link gcc -pthread
-I/ =500 -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE
-DAP_HAVE_DESIGNATED_INITIALIZER I. -I/usr/src/httpd-2.0.49/os/unix
-I/usr/src/httpd-2.0.49/server/mpm/prefork -I .49/modules/proxy
|
by: zhenya.tkachenko |
last post by:
Hi!
Have a problem with mod_auth_mysql.
Compilation and installation of module done ok:
# /usr/local/apache/bin/apxs -c -L/usr/lib/mysql -I/usr/include/mysql
-lmysqlclient -lm -lz mod_auth_mysql.c
/usr/local/apache/build/libtool --silent --mode=compile gcc -prefer-pic
-DAP_HAVE_DESIGNATED_INITIALIZER -DLINUX=2 -D_REENTRANT -D_GNU_SOURCE
-g -O2 -pthread -I/usr/local/apache/include
| |
by: Sidu |
last post by:
Ok well i'm still very new to apache, mysql, and php.. let me explain everything i have set up..
I have installed Appserv, for those of you who are unfamiliar with it.. it installs mysql, php, and apache all in 1 setup..
Ok.. from here.. I have a folder in my local drive appserv within it.. php, apache, mysql, and www. www holds everything in my index which is what i am directed to when i go to http://localhost
Everything seems to be...
|
by: John Murtari |
last post by:
Folks,
Trying to build php 4.4.6 and apache 1.3.37 on RHEL 4.
Each of them builds and installs okay, but when we start
apache we get:
Syntax error on line 238 of /usr/local/etc/httpd/conf/httpd.conf:
API module structure `php4_module' in file
/usr/local/etc/httpd/libexec/libphp4.so is garbled -
perhaps this is not an Apache module DSO?
|
by: MaiyaHolliday |
last post by:
Hello,
I've recently installed apache on a new computer, and cannot figure out why my site will not process any includes. (it was working on my old one) There are no errors on the page such as "include not found", rather much of the page is blank where the included menus, etc would be, and the CSS is not attached.
thanks so much!!!
My httpd.conf looks like this:
|
by: happyse27 |
last post by:
Hi All,
I got this apache errors(see section A1 and A2 below) when I used a html(see section b below) to activate acctman.pl(see section c below). Section D below is part of the configuration of section c.
Not sure where went wrong as the web page displayed internal server error.
Also, what is the error 543? and error 2114. Where to find the list of errors in websites as it is not the standard apache error. I could not find...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |