473,748 Members | 5,849 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Login Problem on Windows 2003 Server

1 New Member
I have a test network consisting of four servers running windows 2003 server R2 SP2. I have set up a domain which functioned correctly for about a day and a half until the other servers decided they can no longer connect to the domain controller. Ping resolves the domain controllers name to the correct ip nslookup finds the ip but can not resolve the name.

When I attempt to log on to a machine on the domain it takes around twenty minutes before logging me on I assume with cached credentails the following error appears in the event log under application

Event ID: 1053 Source: Usernev User: NT AUTHORITY\SYSTE M

Windows cannot determine the user or computer name. (The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you. ). Group Policy processing aborted.

For more information, see Help and Support Center at http://go.microsoft.co m/fwlink/events.asp.

And under System I get Event Id: 5719 Source: NETLOGON

This computer was not able to set up a secure session with a domain controller in domain abc due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.

ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.

For more information, see Help and Support Center at

And under System on the DC I get this error Event Id: 4321 Source: NetBT

The name "abc :1d" could not be registered on the Interface with IP address 172.28.144.1. The machine with the IP address 172.28.144.2 did not allow the name to be claimed by this machine.

For more information, see Help and Support Center at http://go.microsoft.co m/fwlink/events.asp.

172.28.144.2 is runnning ISA 2006 I'm also seeing some more errors to do with group policy I'm wondering if this has something to do with it?

I can access the AD on the DC using the Active Directory Users and Computers snap in I'm also seeing successful account logons under security on the DC.

netdiag output for the DC is

............... ............... ......

Computer Name: PRDC
DNS Host Name: prdc.abc.local
System info : Microsoft Windows Server 2003 R2 (Build 3790)
Processor : x86 Family 6 Model 15 Stepping 6, GenuineIntel
List of installed hotfixes :
KB924667-v2
KB925398_WMP64
KB925902
KB926122
KB927891
KB929123
KB930178
KB931784
KB932168
KB933854
KB935839
KB935840
KB935966
KB936357
Q147222


Netcard queries test . . . . . . . : Passed
[WARNING] The net card 'Intel(R) PRO/1000 MT Network Connection' may not be
working.



Per interface results:

Adapter : Local Area Connection 2

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : prdc01
IP Address . . . . . . . . : 172.28.144.1
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 172.28.144.2
Dns Servers. . . . . . . . :

AutoConfigurati on results. . . . . . : Passed

Default gateway test . . . : Passed

NetBT name test. . . . . . : Passed
[WARNING] At least one of the <00> 'WorkStation Service', <03> 'Messeng
r Service', <20> 'WINS' names is missing.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.

Adapter : Local Area Connection

Netcard queries test . . . : Failed
NetCard Status: DISCONNECTED
Some tests will be skipped on this interface.

Host Name. . . . . . . . . : prdc01
Autoconfigurati on IP Address : 169.254.218.48
Subnet Mask. . . . . . . . : 255.255.0.0
Default Gateway. . . . . . :
Dns Servers. . . . . . . . :



Global results:


Domain membership test . . . . . . : Passed


NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{93 5A7EDA-268B-4ADC-9AAF-9CC87D65FF21}
NetBT_Tcpip_{37 65197D-13D3-44E5-A442-5205E6DCCF6D}
2 NetBt transports currently configured.


Autonet address test . . . . . . . : Passed


IP loopback ping test. . . . . . . : Passed


Default gateway test . . . . . . . : Passed


NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation Serv
ce', <03> 'Messenger Service', <20> 'WINS' names defined.


Winsock test . . . . . . . . . . . : Passed


DNS test . . . . . . . . . . . . . : Passed
PASS - All the DNS entries for DC are registered on DNS server '127.0.0.1'
nd other DCs also have some of the names registered.


Redir and Browser test . . . . . . : Passed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{93 5A7EDA-268B-4ADC-9AAF-9CC87D65FF21}
NetBT_Tcpip_{37 65197D-13D3-44E5-A442-5205E6DCCF6D}
The redir is bound to 2 NetBt transports.

List of NetBt transports currently bound to the browser
NetBT_Tcpip_{93 5A7EDA-268B-4ADC-9AAF-9CC87D65FF21}
NetBT_Tcpip_{37 65197D-13D3-44E5-A442-5205E6DCCF6D}
The browser is bound to 2 NetBt transports.


DC discovery test. . . . . . . . . : Passed


DC list test . . . . . . . . . . . : Passed


Trust relationship test. . . . . . : Skipped


Kerberos test. . . . . . . . . . . : Passed


LDAP test. . . . . . . . . . . . . : Passed


Bindings test. . . . . . . . . . . : Passed


WAN configuration test . . . . . . : Skipped
No active remote access connections.


Modem diagnostics test . . . . . . : Passed

IP Security test . . . . . . . . . : Skipped

Note: run "netsh ipsec dynamic show /?" for more detailed information



and for one of the member machines



Computer Name: PRVM01
DNS Host Name: PRVM01.abc.loca l
System info : Microsoft Windows Server 2003 (Build 3790)
Processor : EM64T Family 6 Model 15 Stepping 7, GenuineIntel
List of installed hotfixes :
Q147222


Netcard queries test . . . . . . . : Passed
[WARNING] The net card 'RAS Async Adapter' may not be working because it has
not received any packets.
[WARNING] The net card 'VMware Virtual Ethernet Adapter for VMnet8' may not
be working because it has not received any packets.
[WARNING] The net card 'VMware Virtual Ethernet Adapter for VMnet1' may not
be working because it has not received any packets.



Per interface results:

Adapter : Local Area Connection

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : PRVM01
IP Address . . . . . . . . : 172.28.144.4
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . : 172.28.144.2
Dns Servers. . . . . . . . : 172.28.144.1


AutoConfigurati on results. . . . . . : Passed

Default gateway test . . . : Passed

NetBT name test. . . . . . : Passed
No names have been found.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.

Adapter : VMware Network Adapter VMnet1

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : PRVM01
IP Address . . . . . . . . : 192.168.192.1
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . :
Dns Servers. . . . . . . . :

AutoConfigurati on results. . . . . . : Passed

Default gateway test . . . : Skipped
[WARNING] No gateways defined for this adapter.

NetBT name test. . . . . . : Passed
No names have been found.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.

Adapter : VMware Network Adapter VMnet8

Netcard queries test . . . : Passed

Host Name. . . . . . . . . : PRVM01
IP Address . . . . . . . . : 192.168.245.1
Subnet Mask. . . . . . . . : 255.255.255.0
Default Gateway. . . . . . :
Dns Servers. . . . . . . . :

AutoConfigurati on results. . . . . . : Passed

Default gateway test . . . : Skipped
[WARNING] No gateways defined for this adapter.

NetBT name test. . . . . . : Passed
No names have been found.

WINS service test. . . . . : Skipped
There are no WINS servers configured for this interface.


Global results:


Domain membership test . . . . . . : Passed


NetBT transports test. . . . . . . : Passed
List of NetBt transports currently configured:
NetBT_Tcpip_{A6 5E2222-2E24-4A61-B407-4F32C4F9B577}
NetBT_Tcpip_{66 78801B-0329-4E3E-825A-C204788FC6B5}
NetBT_Tcpip_{AE 0F51FA-9B1E-48EC-A411-2A4403C02809}
3 NetBt transports currently configured.


Autonet address test . . . . . . . : Passed


IP loopback ping test. . . . . . . : Passed


Default gateway test . . . . . . . : Passed


NetBT name test. . . . . . . . . . : Passed
[WARNING] You don't have a single interface with the <00> 'WorkStation Servi
ce', <03> 'Messenger Service', <20> 'WINS' names defined.


Winsock test . . . . . . . . . . . : Passed


DNS test . . . . . . . . . . . . . : Passed
[WARNING] Cannot find a primary authoritative DNS server for the name
'PRVM01.abc.loc al.'. [ERROR_TIMEOUT]
The name 'PRVM01.abc.loc al.' may not be registered in DNS.
[WARNING] Cannot find a primary authoritative DNS server for the name
'PRVM01.abc.loc al.'. [ERROR_TIMEOUT]
The name 'PRVM01.abc.loc al.' may not be registered in DNS.


Redir and Browser test . . . . . . : Failed
List of NetBt transports currently bound to the Redir
NetBT_Tcpip_{A6 5E2222-2E24-4A61-B407-4F32C4F9B577}
NetBT_Tcpip_{66 78801B-0329-4E3E-825A-C204788FC6B5}
NetBT_Tcpip_{AE 0F51FA-9B1E-48EC-A411-2A4403C02809}
The redir is bound to 3 NetBt transports.

List of NetBt transports currently bound to the browser
NetBT_Tcpip_{AE 0F51FA-9B1E-48EC-A411-2A4403C02809}
NetBT_Tcpip_{66 78801B-0329-4E3E-825A-C204788FC6B5}
NetBT_Tcpip_{A6 5E2222-2E24-4A61-B407-4F32C4F9B577}
The browser is bound to 3 NetBt transports.
[FATAL] Cannot send mailslot message to 'abc*' via browser. [ERROR_INVALI
D_FUNCTION]


DC discovery test. . . . . . . . . : Passed


DC list test . . . . . . . . . . . : Failed
[WARNING] Cannot call DsBind to prdc01.abc.loca l (172.28.144.1). [SEC_E_D
OWNGRADE_DETECT ED]


Trust relationship test. . . . . . : Failed
[WARNING] Don't have access to test your domain sid for domain 'abc'.
[Test skipped]
Secure channel for domain 'abc' is to '\\PRDC01'.
Cannot test secure channel for domain 'abc' to DC 'prdc01'. [ERROR_NO_LOG
ON_SERVERS]


Kerberos test. . . . . . . . . . . : Failed
[FATAL] Cannot lookup package Kerberos.
The error occurred was: (null)


LDAP test. . . . . . . . . . . . . : Failed
[FATAL] Cannot do Negotiate authenticated ldap_bind to 'prdc01.abc.loc al'
: Local Error.
[WARNING] Failed to query SPN registration on DC 'prdc01.abc.loc al'.
[FATAL] No LDAP servers work in the domain 'abc'.


Bindings test. . . . . . . . . . . : Passed


WAN configuration test . . . . . . : Skipped
No active remote access connections.


Modem diagnostics test . . . . . . : Passed

IP Security test . . . . . . . . . : Skipped

Note: run "netsh ipsec dynamic show /?" for more detailed information


The command completed successfully

I should probably point out that networking is not my forte so any help/links on how to interpret the netdiag output plus any other suggestions as to what may be occuring would be good.
Sep 10 '07 #1
1 15216
Cyberdyne
627 Recognized Expert Contributor
On prdc01 you are missing the DNS and Gateway entries.

DNS is crucial on a Domain setup.

What are the roles of your servers, you said you have 4.
How are they connected? Do you have a Firewall and hub setup, which server takes care of the DHCP or are you using your firewall to assign these and running your servers static?

Thank you fo such a detailed info but it is a bit confusing.

I will rename this thread so more people can help. As far as I can tell you are having a problem login in to your domain controller because some of the settings on the network are incorrect or because there is a security issue within the domain that locks up your login.

Regards, Cyberdyne.
Sep 11 '07 #2

Sign in to post your reply or Sign up for a free account.

Similar topics

2
12692
by: Tom Loach | last post by:
Our system administrator set up an NT server group in order to allow our users to login to our application via https to our sql server. The group appears as a User in SQL Server when you look at it in Enterprise Manager. That said, I can not see the users associated with the group from Enterprise Manager, but know they can login to the database. The problem is this. When we login via the web we get access to the database without...
0
1186
by: Shor Erez | last post by:
Hi, I have an ASP application using Forms authentication. On my development web server everything works and login is successful, but when I move my application to the production server the login page is loaded but all login attempts fail. The development server is a windows 2003 server and the production server is a windows 2000 server with .NET framework 1.1 Anyone has any idea why the login fails?
1
1636
by: George | last post by:
Hi. I've deployed a web application on a desktop computer running W2K and IIS. I'm using the desktop as a server. When I try to access the site, either from my development computer or if I log in to a remote machine, the site works fine for me and I'm able to access the aspx pages with no problems. When others try to access the site, it asks them for there login ID, password and domain.
2
2067
by: pvl | last post by:
Hi We have the following scenario: 1. SQL server 2000 on Windows 2003 Server 2. Web server 1, running web service 1 on Windows 2003 Server 3. Web server 2, running web service 2 on Windows 2000 Server 4. Client application. 1, 2 & 3 are all on the same Windows 2003 domain.
1
2793
by: sefe dery | last post by:
Hi ng, i have an Asp.net webapplication on a remote Windows Server 2003. I created on the remote server a windows account and i use the "only windows authentification" in sql server 2000. The name and passwort for the windows account are the same like the credentials in asp.net.
12
6569
by: Michael | last post by:
Please Help me. I've got a .Net 2003 program that attaches to a SQL Server machine and I'm getting the above error when a user tries to log in. The SQL server is setup to use Windows Auth. and I have added the new user to the database and have given the user access to the database for the app. But everytime I try and login using this users ID, I always get the error: Login failed for user Christian.Gaut If I login using my userid and...
6
3239
by: Kat | last post by:
Every time I attempt to run a localhost website, it asks me for a login, as if I am not a user on the local machine. I am a user on the local machine, I am an admin on the local machine. I am not on a network. I have windows xp professional installed, iis is installed and until recently everything worked fine. I am using windows authentication, and have changed everything I can think of to full control, even the Everyone, the vs...
6
1985
by: =?Utf-8?B?U2hlcnJp?= | last post by:
I know this question has been posted in many places, but I have not been able to solve our current problem. The developers in my office are all new to C#.net. We have been developing an application using Visual Studio .NET 2003 and IIS 6 with SQL Server 2000. Up until this point each developer has used a local copy of IIS and connected to sql server on a remote server without any problems. Next week we have a demo, and I have tried to...
0
1904
by: strugart | last post by:
Hi. I a new member and i have a problem with a virtualization. More exactly: I put in a pc windows 2003 server and VMWare Workstation. After that i put a win xp pro and a windows 2003 (3 in total, 2 virtual and 1 real). The host and the win xp are user of a domain of the virtual 2003 ( this have a dns server installed). The users no problems but the dc when login cant do and show this error: Security Manager not initialization cuz the System...
4
12089
by: eruth | last post by:
There are loads of post on this, but nothing that seems to cover my exact problem ;) I have an ASP.Net 1.1 web application running on my local machine. I want to connect to an SQL 2005 server running on Windows 2003. If I use SQL authentication, all is fine and dandy. If I want to use windows authentication it gives the above error. My SQL server is set to allow both methods (first thing I checked) and is part of the domain (2nd...
0
8823
by: Hystou | last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it. First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
0
9530
Oralloy
by: Oralloy | last post by:
Hello folks, I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>". The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed. This is as boiled down as I can make it. Here is my compilation command: g++-12 -std=c++20 -Wnarrowing bit_field.cpp Here is the code in...
0
9363
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth. The Art of Business Website Design Your website is...
1
9312
by: Hystou | last post by:
Overview: Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
1
6793
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms. Adolph will...
0
6073
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert into image. Globals.ThisAddIn.Application.ActiveDocument.Select();...
0
4864
by: adsilva | last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
1
3300
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
3
2206
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.