Ok, i'm not sure if this is the right place to ask this, and if it's not i'm sorry. I recently had to reformat my C drive, and i had to reinstall Visual Studio 2005. Before I reinstalled it, the build menu had all kinds of options like build, rebuild, clean and several more. Now all it has is build Project and Publish Project. How do I get rebuild and clean back?
Thanks.
8 1793 TRScheel 638
Recognized Expert Contributor
Ok, i'm not sure if this is the right place to ask this, and if it's not i'm sorry. I recently had to reformat my C drive, and i had to reinstall Visual Studio 2005. Before I reinstalled it, the build menu had all kinds of options like build, rebuild, clean and several more. Now all it has is build Project and Publish Project. How do I get rebuild and clean back?
Thanks.
The items it shows depends on the project, and even the file, you have open.
Plater 7,872
Recognized Expert Expert
Is it possible that you have a "project" open and not a "solution" ?
I think that might be the case when you do that
i checked that...it is the solution, the .sln file.
Plater 7,872
Recognized Expert Expert
Did you do a build and then see if the options came back?
You can't really RE-build something if you never built it in the first place?
I have built it a dozen times. I really need the rebuild option cause right now i'm having problems with the program not realizing i've changed some code. I can't really get anymore work done on this thing until I can rebuild it. please help!!
Plater 7,872
Recognized Expert Expert
Only other thing I can think of is that when you installed VS this last time you told the UI to match a look-and-feel for a certain code type and that isn't included.
I would say go to Tools->Options and then dig through the environment section, you might find something there
RedSon 5,000
Recognized Expert Expert
It could also be the type of view that you have selected when you first installed VS. You can choose different configurations based on your job function, VS tries to make its workspace more efficient for you. But it usually fails miserably.
MMcCarthy 14,534
Recognized Expert Moderator MVP
This question has also been posted in the Visual Basic forum. http://www.thescripts.com/forum/thread650870.html
eddyman592
You need to be careful about double posting questions. At the very least let the forums know you have also posted the question elsewhere. It is better all around if the experts know the advice you are getting elsewhere so they don't double up or point you in different directions.
ADMIN
Sign in to post your reply or Sign up for a free account.
Similar topics |
by: Peter Stojkovic |
last post by:
I have a Solution with 3 projects all in VB.
If I make Changes in project A in one file, and say run,
than the compiler finds always errors in a other forms, that should be
correct.
After a full rebuild of the solution everything is OK.
But that needs too much time, to make ALWAYS a full rebuild of the soultion.
|
by: Daniel Deptford |
last post by:
Hello there,
We're having a some problems with Visual Studio 2003 at the moment. In a
nutshell, devenv.exe terminates when trying to run our application after a
full rebuild. After trying to track this down using Filemon.exe (from
www.sysinternals.com) and debugging devenv.exe (in developer studio :))
using the Microsoft symbols (from the MS Symbol server), it appears that it
crashes in mspdb71.dll when doing a full dependency check.
...
|
by: Ant |
last post by:
Hello,
Why is there a choice between build Solution & Rebuild Solution in the IDE.
what is the difference? When would you use one over the other?
Many thanks for your thoughts
Ant.
|
by: Wilfried Mestdagh |
last post by:
Hi,
I'm using C#2005 beta. In menu I find 'build solution' and also 'rebuild
solution'. Can someone tell me the difference ? Because if you click again on
'build' then you do a rebuild not ? Maybe it's my english :(
--
rgds, Wilfried
http://www.mestdagh.biz
|
by: Bennett Haselton |
last post by:
If I create a new C# Web Project in Visual Studio and add this to the
Page_Load method for WebForm1:
Response.Write("firsttime");
then hitting F5 to debug the project of course shows the WebForm with
"firsttime" on the page.
But if I then change it to Response.Write("secondtime") and hit F5,
the changes don't take effect -- the WebForm still opens and displays
| |
by: skootr |
last post by:
What is the difference between "Build Solution" and "Rebuild Solution" ? While browsing Help I saw a reference to "cleaning files" but Help does not explain what that means
thanks in advance
|
by: mwazir |
last post by:
Hi all,
Needed a clarification on a simple point. What is the real difference
between Build and Rebuild option in the .NET IDE and when should either of
the options be used?
I tried searching the MSDN website and I found this
Build - Builds the specified solution or project according to the specified
solution configuration.
|
by: |
last post by:
I have not been able to see any difference between what happens when I use
Build>Build Solution or Build>ReBuild Solution.
Is there any reason to use one or the other at any time?
Thanx......joisey
|
by: mac |
last post by:
I just put C# express editiion on my son's computer so he can learn how to
code, and we've run into a weird problem.
Whenever he makes a change to his code and hits F6 (build) the IDE reports
that the build succeded. However, when he runs the program (Start without
debugging), the new build IS NOT being run. He has to actually choose
Build|Rebuild Solution from the menu for the new build to run. Just
building with F6, or running with...
|
by: RAM |
last post by:
Hello,
I am learning .NET 2.0, Visual ... 2005 Express Edition. Could you explain
me please the difference betwen Build and Rebuild commands? Thank you.
/RAM/
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
| |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
| |
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |