I have one bat file that contains a command to startup Java Program. Then, I
would like to create a cluster job to call the bat file. In case of one
computer is down, another computer can also call the bat file and startup my
Java Program.
For this purpose, I have tried to place the bat file into share drive of two
computers which are cluster machine. Also, I used Generic Application to
create a job to call my bat file and this job is set with depending of that
share drive. But, two problems was happening when I turned on the cluster job
to online mode.
Problems:
1. When I turned on the job to online mode, the Java program was workable as
log file can be created by the Java program. However, I didn't know why the
log file was still continously printing information when I turned off the
cluster job to be offline mode. It seems the cluster job could not stop the
Java program.So, could anyone explained me how to set a cluster job to call
that bat file in order to startup and stop my Java program?
2. My Java program was required to get external file from a network drive.
However, when I used the cluster job to startup that Java program. The log
created by Java program showed that it could not connect to the network drive
such as X drive. But I sured that I had mapped the drive alreadly before
startup the cluster job.
Configuration
Windows Cluster 2000
PS: When I startup the Java program from the bat file stand alone, all thing
is workable including startup and stop the program and connecting to network
drive. Thanks a lot.
1  3581 
This is a .Net Programming newsgroup. If your questino has something to do
with .Net, please post some code and be more specific. Otherwise, please
find a more relevant forum.
Robin S.
-------------------------------
"Kenny" <Ke***@discussi ons.microsoft.c omwrote in message
news:32******** *************** ***********@mic rosoft.com...
>I have one bat file that contains a command to startup Java Program. Then,
I
would like to create a cluster job to call the bat file. In case of one
computer is down, another computer can also call the bat file and startup
my
Java Program.
For this purpose, I have tried to place the bat file into share drive of
two
computers which are cluster machine. Also, I used Generic Application to
create a job to call my bat file and this job is set with depending of
that
share drive. But, two problems was happening when I turned on the cluster
job
to online mode.
Problems:
1. When I turned on the job to online mode, the Java program was workable
as
log file can be created by the Java program. However, I didn't know why
the
log file was still continously printing information when I turned off the
cluster job to be offline mode. It seems the cluster job could not stop
the
Java program.So, could anyone explained me how to set a cluster job to
call
that bat file in order to startup and stop my Java program?
2. My Java program was required to get external file from a network
drive.
However, when I used the cluster job to startup that Java program. The
log
created by Java program showed that it could not connect to the network
drive
such as X drive. But I sured that I had mapped the drive alreadly before
startup the cluster job.
Configuration
Windows Cluster 2000
PS: When I startup the Java program from the bat file stand alone, all
thing
is workable including startup and stop the program and connecting to
network
drive. Thanks a lot.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: BlackHawke |
last post by:
Our program, game program Andromeda Online (www.andromedaonline.net) uses
two programs- one to play the game, another to patch the game as updates
come out. Players actually launch the updater which checks for fresh
updates, then installs them, then launches the game client.
We have begun our beta test, and would like to have the client open with a
console window so that players can see exceptions that are thrown. How to do
this seems to...
|
by: Tom |
last post by:
Hi,
I wrote a java console program. But, I am not familiar with Swing to write
the GUI.
I want to use C# to write the GUI, e.g. a start and a stop buttons.
When I click the start button, it execute the jar file. Or, I wrote a batch
file and let the GUI to run it.
|
by: Peter Ericsson |
last post by:
Does anyone know if Microsoft plans to implement an C#
(.net) API for MS Cluster like the one in C++?
Or has someone else written a C# wrapper for the C++ API?
|
by: Dhruba Bandopadhyay |
last post by:
Validation of viewstate MAC failed. If this application is hosted by a Web
Farm or cluster, ensure that <machineKey> configuration specifies the same
validationKey and validation algorithm. AutoGenerate cannot be used in a
cluster.
The above message is what I get in my ASP.NET 2.0 page. I have debugging
turned on and for those who want to see the stack trace, see below.
In my old web site I had a frame set with a ASP page in left frame...
|
by: ThunderMusic |
last post by:
Hi,
We have many servers setup as a cluster. When one server crashes, another
one take the relay... We want to know if it's possible (I suppose it is) to
make a Windows service developed with .NET 2.0 work in a cluster
environment. I mean, how to make sure the service will take the relay if one
server fails. Is there something special to do or it will work by itself?
(I'm not personally used to clusters, we need it at my office and they...
| | |
by: Simon |
last post by:
Hi All,
I'm hoping someone will have some words of wisdom for me regarding MS
Clustering on Windows 2003.
I have a service that runs on a cluster. During invocation it's
supposed to determine from the cluster which node is active (this is a
active/standby configuration) and either proceed or sleep depending on
the status. The interface to the cluster is that advertised by the
standard interop layer built by Visual Studio for the...
|
by: Bruno LIVERNAIS |
last post by:
Hi,
We are currently installing a DB2 V9 ESE on a Linux server
(RHEL4U4-x86_64). Installation runs successfully on each node. Database
user environment is OK and the instance is well created. To be sure,
we've started the database with db2start =successfull. And then shut
it down again successfully too.
The tricks appears when we switch the hp MC/ServiceGuard (A.11.16 for
Linux) package to the other node... the database does not want...
|
by: swethak |
last post by:
Hi,
i have a command to convert the video file into image
ffmpeg -i sample.wmv -f image2 -t 0.001 -ss 3 ss.jpg
i run that one in command prompt it converted the video file into image.
But i executed that command in jsp Program .It didn't work.It shows error.
|
by: sayeo87 |
last post by:
Hi, I am quite new to JSP so please forgive me if I ask really simple things... I am trying to run system commands on the server and display the output on a webpage. This is what I've got:
<%@ page import="java.io.*" %>
<HTML>
<BODY>
<%
Runtime rt = Runtime.getRuntime();
Process p = rt.exec("/bin/ls");
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
