Hello all!
This is what I want to do, looking the for the best way to do this.
I have a text file that gets created and placed in a folder. I would like to
have a watch for that file when it pops in that folder. But I would alway
like to have the watch active. I don't want it at Form Load, and I can't
have a button get clicked. I just would like to have when ever that file gets
put in that folder, it performs my next step. I'll be staying on one form.
How would I write this?
Thanks!
Rudy
3  2494 
Hello Rudy,
See FileSystemWatch er class in MSDN, there are several samples.
This class automatically raise an event when directory/file in a directory
changes
Just create app that will be located into tray area and notify u on each
file change
RHello all!
RThis is what I want to do, looking the for the best way to do this.
RI have a text file that gets created and placed in a folder. I would
Rlike to
Rhave a watch for that file when it pops in that folder. But I would
Ralway
Rlike to have the watch active. I don't want it at Form Load, and I
Rcan't
Rhave a button get clicked. I just would like to have when ever that
Rfile gets
Rput in that folder, it performs my next step. I'll be staying on one
Rform.
RHow would I write this?
RThanks!
R>
RRudy
R>
---
WBR,
Michael Nemtsev :: blog: http://spaces.msn.com/laflour
"At times one remains faithful to a cause only because its opponents do not
cease to be insipid." (c) Friedrich Nietzsche
Thanks Michael!
I did look at the documetnation, but still couldn't get it to work right.
Then I saw there is a component of FileWatch, I set that up, works fine.
"Michael Nemtsev" wrote:
Hello Rudy,
See FileSystemWatch er class in MSDN, there are several samples.
This class automatically raise an event when directory/file in a directory
changes
Just create app that will be located into tray area and notify u on each
file change
RHello all!
RThis is what I want to do, looking the for the best way to do this.
RI have a text file that gets created and placed in a folder. I would
Rlike to
Rhave a watch for that file when it pops in that folder. But I would
Ralway
Rlike to have the watch active. I don't want it at Form Load, and I
Rcan't
Rhave a button get clicked. I just would like to have when ever that
Rfile gets
Rput in that folder, it performs my next step. I'll be staying on one
Rform.
RHow would I write this?
RThanks!
R>
RRudy
R>
---
WBR,
Michael Nemtsev :: blog: http://spaces.msn.com/laflour
"At times one remains faithful to a cause only because its opponents do not
cease to be insipid." (c) Friedrich Nietzsche
Actually, everything doesn't work fine. My watch works well, Thank you
Michael. But that text file that is being created is coming from a SQL
trigger. when the trigger runs more than once in the same session I get a
"The process can not acess the file because it's being used by another
process"
This is refering to my text file. If I run the trigger without my app, it
works fine.
What do I need to do so I can run this trigger more than once in the same
session, is there a way to refresh the process or something? FYI I'm using
VS 2003, SQL 2000.
I'm hope this make sence to somebody, cause it sure doesn't make sence to me.
LOL
TIA!!
Rudy
"Rudy" wrote:
Thanks Michael!
I did look at the documetnation, but still couldn't get it to work right.
Then I saw there is a component of FileWatch, I set that up, works fine.
"Michael Nemtsev" wrote:
Hello Rudy,
See FileSystemWatch er class in MSDN, there are several samples.
This class automatically raise an event when directory/file in a directory
changes
Just create app that will be located into tray area and notify u on each
file change
RHello all!
RThis is what I want to do, looking the for the best way to do this.
RI have a text file that gets created and placed in a folder. I would
Rlike to
Rhave a watch for that file when it pops in that folder. But I would
Ralway
Rlike to have the watch active. I don't want it at Form Load, and I
Rcan't
Rhave a button get clicked. I just would like to have when ever that
Rfile gets
Rput in that folder, it performs my next step. I'll be staying on one
Rform.
RHow would I write this?
RThanks!
R>
RRudy
R>
---
WBR,
Michael Nemtsev :: blog: http://spaces.msn.com/laflour
"At times one remains faithful to a cause only because its opponents do not
cease to be insipid." (c) Friedrich Nietzsche
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: rawCoder |
last post by:
Hi All,
I have a *.cer file, a public key of some one and I want to encrypt some
thing using this public key.
Can someone point me to a sample code for Encrypting some file using
X509Certificate ( *.cer file ) so that it can be used to email as
attachment.
The real part is Encrypting using X509Certificate and CryptoServiceProvider.
|
by: Mike |
last post by:
When trying to compile (using Visual Web Developer 2005 Express Beta;
frameworkv2.0.50215 ) the source code below I get errors (listed below due to
the use of ICallBackEventHandler. Ultimately I want to use a callback from
the client side to update webcontrols based on user input without using
postback.
I am seeking a way to stop the compile errors.
using System;
using System.Data;
|
by: Christopher Benson-Manica |
last post by:
Why can't I use a class destructor in a using declaration:
using MyClass::~MyClass;
?
--
Christopher Benson-Manica | I *should* know what I'm talking about - if I
ataru(at)cyberspace.org | don't, I need to know. Flames welcome.
|
by: beliavsky |
last post by:
Many of my C++ programs have the line
using namespace std;
but the "Accelerated C++" book of Koenig and Moo has many examples
where the library names are included one at a time, for example
using std::cin;
using std::cout;
|
by: Petter Reinholdtsen |
last post by:
I ran into a problem on HP-UX 11.00 the other day, where it refused to
compile a program using 'using namespace std;' at the top. The reason
seem to be that the compiler refuses to accept 'using namespace std;'
unless the std namespace was declared first.
This triggered my curiosity, and I tried to find out what the ANSI C++
standard had to say about this. I'm unable to find a conclusion, and
hope someone here have a clue to spare.
...
| | |
by: john.burton.email |
last post by:
I've done some extensive searching and can't seem to find an answer to
this -
Is it correct to using "using" with templates, for example:
using std::vector;
Or do I need to specify the type too:
using std::vector<int>;
Both seem to "work" on the compiler I have and I can't find any
documentation saying which is correct, or are both correct?
|
by: Enos Meroka |
last post by:
Hallo,
I am a student doing my project in the university.. I have been trying
to compile the program using HP -UX aCC compiler, however I keep on
getting the following errors.
=================================================================
Error 19: "CORBAManagerMessages.h", line 4 # Unexpected 'std'.
using std::string;
^^^
|
by: Rudy |
last post by:
Hello all!
I am having problem wih filewatch, I think. Basicly I have a trigger that
creates a file. Filewatch looks for a modified date on the file, than when
it see's it, it should pop up a message box. The problem it pop's up 3 or 4
message boxes. I just need it once.Here some code from app 1 that will
execute the store procedure.
Private Sub ON_Click_1(ByVal sender As System.Object, ByVal e As
System.EventArgs) Handles...
|
by: JDeats |
last post by:
I have some .NET 1.1 code that utilizes this technique for encrypting
and decrypting a file.
http://support.microsoft.com/kb/307010
In .NET 2.0 this approach is not fully supported (a .NET 2.0 build
with these methods, will appear to encrypt and decrypt, but the
resulting decrypted file will be corrupted. I tried encrypting a .bmp
file and then decrypting, the resulting decrypted file under .NET 2.0
is garbage, the .NET 1.1 build works...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| | |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
