Hi,
I have a C++ application that I have built using MS VC++ .NET. I would like
to set it up/convert it for multiple users to run it from the web. What do I
need to do to make this available to users. The scenario that I envision is a
user connect to the web using a browser (eg. Internet Explorer), goes to a
web page containing access to the program, registers for the program's use
(eg. credit card info. etc, billing information etc), then runs the program.
I don't want to keep each user's data but to store it (and any subsequent
changes) back on the user's local PC for use the next time the program is
run. For each user, the program will run, access the data off of the user's
local hard drive, do the calculations and save/print the reports at the
user's local printer. The data will finally be saved back to the user's local
hard drive for use the next time the program is run from the web.
I could use some pointers to web sources which would provide me with
information to:
- convert the program to run for multiple users each using their own
individual data sets. It now runs from a locally installed version of a
single user version installed on their local hard drive.
- set up a web site (ie what software, server programs etc. I need installed
on the web site, etc)(requiremen ts for that web site in order to have the
program run) (suggestions for inexpensive hosting sites where I could set
such a service up).
- any other information that I would need to achieve this goal (eg links,
information, "watch-outs", hints, etc).
- suggested "further reading" books, publications, information sources, etc.
I'm new to this web technology. Thanks in advance,
....Les Dunn 0 865 This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Mike |
last post by:
I am sure that I am making a simple boneheaded mistake and I would
appreciate your help in spotting in. I have just installed
apache_2.0.53-win32-x86-no_ssl.exe
php-5.0.3-Win32.zip
Smarty-2.6.7.tar.gz
on a system running WindowsXP SP2.
Apache and PHP tested out fine. After adding Smarty, I ran the
following http://localhost/testphp.php
|
by: edgrsprj |
last post by:
PROPOSED EARTHQUAKE FORECASTING
COMPUTER PROGRAM DEVELOPMENT EFFORT
Posted July 11, 2005
My main earthquake forecasting Web page is:
http://www.freewebz.com/eq-forecasting/Data.html
Newsgroup Readers: If you circulate copies of this report to groups of
computer programmers at different universities etc. around the world then
they might find the subject matter to be interesting.
|
by: Tom Lee |
last post by:
Hi,
I'm new to .NET 2003 compiler. When I tried to compile my
program using DEBUG mode, I got the following errors in the
C:\Program Files\Microsoft Visual Studio .NET 2003\Vc7
\include\xdebug file as folows. I need help to resolve
them ASAP:
cl /c /nologo /MDd /W3 /Od /GR /GM /Zi /GX /D "_DEBUG" /D "
WIN32" /D "_W
INDOWS" /D "_WINDLL" /D "_AFXDLL" /D "_MBCS" /D "_USRDLL" /
|
by: christopher diggins |
last post by:
I am wondering if any can point me to any open-source library with program
objects for C++ like there is in Java? I would like to be able to write
things like
MyProgram1 >> MyProgram2 >> Fork(MyProgram3, SomeFile);
If not would this be something of interest to others?
Thanks in advance,
|
by: Eric Whittaker |
last post by:
hi all,
im trying to write my first c++ program. a success, but i can't get the
window to stay open after user enters input. it just automatically closes.
right now the end of my program looks like this:
return 0;
}
| |
by: Hemal |
last post by:
Hi All,
I need to know the memory required by a c program. Is there any
tool/utility which can give me the memory usage in terms of DATA
segment, TEXT segment, BSS segment etc.
I am working on linux platform and my target is ARM processor. But i
guess it should not matter. Actually i need to know both RAM & ROM
usage.
|
by: ibtc209 |
last post by:
I just started programming in C, and I need some help with this problem.
Your program will read the information about one MiniPoker hand, namely the rank and suit of the hand’s
first card, and the rank and suit of its second card. Note that the two cards in a hand may be entered in
any order; it’s not necessarily the case that the highest card will appear first, for example. Your program will
then determine whether the hand is valid, and...
|
by: Banfa |
last post by:
Posted by Banfa
The previous tutorial discussed what programming is, what we are trying to achieve, the answer being a list of instructions constituting a valid program. Now we will discuss how we set about doing that.
Every program starts with a specification, this may be a several hundred page document from your latest client or one small paragraph from your professor and pretty much anything in-between.
The specification is very...
|
by: amitpatel66 |
last post by:
There is always a requirement that in Oracle Applications, the Concurrent Program need to be execute programatically based on certain conditions/validations:
Concurrent programs can be executed programatically either from UNIX or Oracle PLSQL. In this Section, I will be explaining about calling a Concurrent program from UNIX using the CONCSUB Command.
Pre-requisite:
1. Concurrent Program should be registered in oracle Applications...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |