Hello Everyone,
I have an application that uses the application updater block V2. The
application is launched using an appStart assembly first. Everything has
been working great for a few weeks now, until last night when I added
reports to the manifest. I cannot for the life of me determine what is
going on.
I am using the Bits Downloader Provider to update my files. I have created
text files and given them the name of the report files and they transfer
fine. I have take the application.exe file and copied them as the report
file names and it transfers fine. The only time they will not transfer
properly is when they are the actual Crystal Reports. (I will concede that
Crystal has been out to torment my very existence since they came out with
the first version of their product, but this is pushing it.)
I have tested the reports function properly within the application.
Please assist me with this, I am nearing my release date, and I don't want
this to be a road block.
I challenge looking back at the updater code for two reasons: 1. It has
been compiled and unmarred since before the release of this application, and
was never altered from its original source when I downloaded it. 2. It has
been working in the past with both binary and ASCII files.
TIA
1  2165 
Apparently the issue is more subtle than it first appeared. While I was
experiencing this issue last night across a couple of development machines,
I cannot replicate the issue now. Perhaps the issue lies with the web
server or the network itself. I will continue to monitor this.
Thanks anyway,
"AMDRIT" <am****@hotmail .com> wrote in message
news:uS******** ******@TK2MSFTN GP14.phx.gbl... Hello Everyone,
I have an application that uses the application updater block V2. The
application is launched using an appStart assembly first. Everything has
been working great for a few weeks now, until last night when I added
reports to the manifest. I cannot for the life of me determine what is
going on.
I am using the Bits Downloader Provider to update my files. I have
created text files and given them the name of the report files and they
transfer fine. I have take the application.exe file and copied them as
the report file names and it transfers fine. The only time they will not
transfer properly is when they are the actual Crystal Reports. (I will
concede that Crystal has been out to torment my very existence since they
came out with the first version of their product, but this is pushing it.)
I have tested the reports function properly within the application.
Please assist me with this, I am nearing my release date, and I don't want
this to be a road block.
I challenge looking back at the updater code for two reasons: 1. It has
been compiled and unmarred since before the release of this application,
and was never altered from its original source when I downloaded it. 2.
It has been working in the past with both binary and ASCII files.
TIA This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Nick |
last post by:
Hi,
I would like to make my application to automatically
check on updates from a source and if any, downloads it
and automatically updates itself with the new version.
Now because the application itself is running, I cannot
update the executable immediately, but need to request a
restart of the computer to automatically update itself.
Does anyone know how I can update the application without
having to restart the computer but is still...
|
by: Benjamin Day |
last post by:
Does anyone ACTUALLY have the application updater block working?
I've been beating my head against the wall on this one for about 3
days. It looks cool. It seems promising. I've even read this guy's
blog entry about how to implement it
(http://weblogs.asp.net/duncanma/articles/10221.aspx) and how breath
takingly simple it is to actually get it done.
Damned if I can get it to work.
|
by: john wright |
last post by:
I am trying to find a good tutorial on how to use this verison of the
updater block so I can incorporate it into my projects. I have tried to use
the documentation with some success, however most examples are in C# and
make some big assumptions. Here is what I am after:
1. How to use Updater in my programs (references, code, etc...)
2. How to set up a manifest.
3. How to set up Updater for each project
4. Code samples for VB.
5. ...
|
by: AMDRIT |
last post by:
Hello Everyone,
I have an application that uses the application updater block V2. The
application is launched using an appStart assembly first. Everything has
been working great for a few weeks now, until last night when I added
reports to the manifest. I cannot for the life of me determine what is
going on.
I am using the Bits Downloader Provider to update my files. I have created
text files and given them the name of the report...
|
by: SouthSpawn |
last post by:
I am looking for a way to distrubute my client application. Once I
distrubute my application, I will want it to automatically update itself.
I will put the new files on the webserver. I have seen examples of this on
the web. But none of them are good. Does anyone know any resource where I
an get the source code that is pretty much fully working?
Thanks,
Mark
| | |
by: Amjath |
last post by:
I put all my application updater block dll to GAC, to avoid keeping this
dll's in my bin folder.
After doing this all i build my project, it works fine, now i run my project
it give me an error like this,
"Unable to load configuration from the XML configuration file: 'My
Application Path'.
This can be caused by a number of problems, but the most common problem is
an incorrectly configured Updater configuration file.
The most probable...
|
by: Amjath |
last post by:
I put all my application updater block dll to GAC, to avoid keeping this
dll's in my bin folder.
After doing this all i build my project, it works fine, now i run my project
it give me an error like this,
"Unable to load configuration from the XML configuration file: 'My
Application Path'.
This can be caused by a number of problems, but the most common problem is
an incorrectly configured Updater configuration file.
The most probable...
|
by: UJ |
last post by:
Can somebody either post or put up a link that uses the Updater Application
Block? I apparently am doing something wrong and can't figure it out.
I call updater.BeginDownload with my manifests, it downloads the manifests,
I activate the manifests and the programs don't get updated.
The stuff that is done on the MS pages about the application block are of no
help because they list all the events for an asynch download but not what to
do...
|
by: Jason Huang |
last post by:
Hi,
Our C# windows form applications deploy on our clients, most PCs are Windows
XP.
And we want to do something so the application will listen to our server to
check if an updating is needed, to some extent it's similiar to the Windows
Update.
I am not sure if C# can do this or I have to solve it in other ways.
Any help will be appreciated.
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
| | |
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
