When I run the following code:
OleDbConnection conn = new OleDbConnection (
@"Provider=Micr osoft.Jet.OLEDB .4.0;Data
Source=C:\money makin.mdb");
String stmt = "INSERT INTO Person (FirstName,
LastName, Email, LoginID, Password) VALUES (" +
"'" + this.m_perFirst Name + "', '" +
this.m_perLastN ame +
"', '" + this.m_emailAdd ress + "', '" +
this.m_loginID +
"', '" + this.m_password + "')";
MessageBox.Show (stmt);
//conn.Open();
OleDbCommand perCommand = new OleDbCommand
(stmt, conn);
perCommand.Conn ection.Open();
perCommand.Exec uteNonQuery();
//OleDbDataReader perReader =
perCommand.Exec uteNonQuery();
//perReader.Close ();
I get the following error no matter what:
************** Exception Text **************
System.Data.Ole Db.OleDbExcepti on: Syntax error in INSERT
INTO statement.
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextErrorHand
ling(Int32 hr)
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextForSingle
Result(tagDBPAR AMS dbParams, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand Text
(Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand
(CommandBehavio r behavior, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteReaderI nternal
(CommandBehavio r behavior, String method)
at System.Data.Ole Db.OleDbCommand .ExecuteNonQuer y()
at WindowsSample.P erson.saveNewDa ta() in c:\Documents
and Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\DataIte ms\Person.cs:li ne 192
at WindowsSample.P ersonalInfo.btn PersonalSave_Cl ick
(Object sender, EventArgs e) in c:\Documents and
Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\Forms\P ersonalInfo.cs: line 326
at System.Windows. Forms.Control.O nClick(EventArg s e)
at System.Windows. Forms.Button.On Click(EventArgs e)
at System.Windows. Forms.Button.On MouseUp
(MouseEventArgs mevent)
at System.Windows. Forms.Control.W mMouseUp(Messag e& m,
MouseButtons button, Int32 clicks)
at System.Windows. Forms.Control.W ndProc(Message& m)
at System.Windows. Forms.ButtonBas e.WndProc(Messa ge& m)
at System.Windows. Forms.Button.Wn dProc(Message& m)
at System.Windows. Forms.ControlNa tiveWindow.OnMe ssage
(Message& m)
at System.Windows. Forms.ControlNa tiveWindow.WndP roc
(Message& m)
at System.Windows. Forms.NativeWin dow.Callback(In tPtr
hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Line 192 refers to the executenonquery () method. I have
tested the query by itself in Access, and it inserts the
value just fine. Does anyone have any idea what could be
wrong? I have tracked it down to the loginID or Password
field, as the query works fine without those two in
there, but I am not sure what the problem is. Any help
would be much appreciated!
Kirk
3  1546 
Password is a reserved word in Access and is the most likely culprit It
will run ok within access, but via ADO.NET, reserved words cause all kinds
of problems. The bandaid is to wrap it in bracekts [Password] but you or a
co-worker will invariably forget this sometime in the future. IMHO, get rid
of it b/c it's not worth the maintenance and headaches it will likely cause.
HTH,
Bill
"kirk g" <ky*@datatel.co m> wrote in message
news:03******** *************** *****@phx.gbl.. . When I run the following code:
OleDbConnection conn = new OleDbConnection (
@"Provider=Micr osoft.Jet.OLEDB .4.0;Data
Source=C:\money makin.mdb");
String stmt = "INSERT INTO Person (FirstName,
LastName, Email, LoginID, Password) VALUES (" +
"'" + this.m_perFirst Name + "', '" +
this.m_perLastN ame +
"', '" + this.m_emailAdd ress + "', '" +
this.m_loginID +
"', '" + this.m_password + "')";
MessageBox.Show (stmt);
//conn.Open();
OleDbCommand perCommand = new OleDbCommand
(stmt, conn);
perCommand.Conn ection.Open();
perCommand.Exec uteNonQuery();
//OleDbDataReader perReader =
perCommand.Exec uteNonQuery();
//perReader.Close ();
I get the following error no matter what:
************** Exception Text **************
System.Data.Ole Db.OleDbExcepti on: Syntax error in INSERT
INTO statement.
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextErrorHand
ling(Int32 hr)
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextForSingle
Result(tagDBPAR AMS dbParams, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand Text
(Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand
(CommandBehavio r behavior, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteReaderI nternal
(CommandBehavio r behavior, String method)
at System.Data.Ole Db.OleDbCommand .ExecuteNonQuer y()
at WindowsSample.P erson.saveNewDa ta() in c:\Documents
and Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\DataIte ms\Person.cs:li ne 192
at WindowsSample.P ersonalInfo.btn PersonalSave_Cl ick
(Object sender, EventArgs e) in c:\Documents and
Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\Forms\P ersonalInfo.cs: line 326
at System.Windows. Forms.Control.O nClick(EventArg s e)
at System.Windows. Forms.Button.On Click(EventArgs e)
at System.Windows. Forms.Button.On MouseUp
(MouseEventArgs mevent)
at System.Windows. Forms.Control.W mMouseUp(Messag e& m,
MouseButtons button, Int32 clicks)
at System.Windows. Forms.Control.W ndProc(Message& m)
at System.Windows. Forms.ButtonBas e.WndProc(Messa ge& m)
at System.Windows. Forms.Button.Wn dProc(Message& m)
at System.Windows. Forms.ControlNa tiveWindow.OnMe ssage
(Message& m)
at System.Windows. Forms.ControlNa tiveWindow.WndP roc
(Message& m)
at System.Windows. Forms.NativeWin dow.Callback(In tPtr
hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Line 192 refers to the executenonquery () method. I have
tested the query by itself in Access, and it inserts the
value just fine. Does anyone have any idea what could be
wrong? I have tracked it down to the loginID or Password
field, as the query works fine without those two in
there, but I am not sure what the problem is. Any help
would be much appreciated!
Kirk
That was it...thank you very much for your help. I am
just getting started with .NET, C#, and ADO by doing some
stuff at home, and have been banging my head against a
wall on this one.
Much appreciated!
Kirk -----Original Message-----
Password is a reserved word in Access and is the most
likely culprit Itwill run ok within access, but via ADO.NET, reserved
words cause all kindsof problems. The bandaid is to wrap it in bracekts
[Password] but you or aco-worker will invariably forget this sometime in the
future. IMHO, get ridof it b/c it's not worth the maintenance and headaches
it will likely cause.
HTH,
Bill
"kirk g" <ky*@datatel.co m> wrote in message
news:03******* *************** ******@phx.gbl. .. When I run the following code:
OleDbConnection conn = new OleDbConnection (
@"Provider=Micr osoft.Jet.OLEDB .4.0;Data
Source=C:\money makin.mdb");
String stmt = "INSERT INTO Person
(FirstName, LastName, Email, LoginID, Password) VALUES (" +
"'" + this.m_perFirst Name + "', '" +
this.m_perLastN ame +
"', '" + this.m_emailAdd ress
+ "', '" + this.m_loginID +
"', '" + this.m_password + "')";
MessageBox.Show (stmt);
//conn.Open();
OleDbCommand perCommand = new OleDbCommand
(stmt, conn);
perCommand.Conn ection.Open();
perCommand.Exec uteNonQuery();
//OleDbDataReader perReader =
perCommand.Exec uteNonQuery();
//perReader.Close ();
I get the following error no matter what:
************** Exception Text **************
System.Data.Ole Db.OleDbExcepti on: Syntax error in
INSERT INTO statement.
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextErrorHand ling(Int32 hr)
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextForSingle Result(tagDBPAR AMS dbParams, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand Text
(Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand
(CommandBehavio r behavior, Object& executeResult)
at
System.Data.Ole Db.OleDbCommand .ExecuteReaderI nternal (CommandBehavio r behavior, String method)
at System.Data.Ole Db.OleDbCommand .ExecuteNonQuer y()
at WindowsSample.P erson.saveNewDa ta() in
c:\Documents and Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\DataIte ms\Person.cs:li ne 192
at WindowsSample.P ersonalInfo.btn PersonalSave_Cl ick
(Object sender, EventArgs e) in c:\Documents and
Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\Forms\P ersonalInfo.cs: line 326
at System.Windows. Forms.Control.O nClick(EventArg s e)
at System.Windows. Forms.Button.On Click(EventArgs e)
at System.Windows. Forms.Button.On MouseUp
(MouseEventArgs mevent)
at System.Windows. Forms.Control.W mMouseUp(Messag e&
m, MouseButtons button, Int32 clicks)
at System.Windows. Forms.Control.W ndProc(Message& m)
at System.Windows. Forms.ButtonBas e.WndProc(Messa ge&
m) at System.Windows. Forms.Button.Wn dProc(Message& m)
at
System.Windows. Forms.ControlNa tiveWindow.OnMe ssage (Message& m)
at System.Windows. Forms.ControlNa tiveWindow.WndP roc
(Message& m)
at System.Windows. Forms.NativeWin dow.Callback(In tPtr
hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Line 192 refers to the executenonquery () method. I
have tested the query by itself in Access, and it inserts
the value just fine. Does anyone have any idea what could
be wrong? I have tracked it down to the loginID or
Password field, as the query works fine without those two in
there, but I am not sure what the problem is. Any help
would be much appreciated!
Kirk
.
My pleasure. Keep on trucking though, ADO.NET is a bit confusing at first,
but you'll quickly learn to love it.
Bill
"Kirk Gray" <ky*@datatel.co m> wrote in message
news:04******** *************** *****@phx.gbl.. . That was it...thank you very much for your help. I am
just getting started with .NET, C#, and ADO by doing some
stuff at home, and have been banging my head against a
wall on this one.
Much appreciated!
Kirk
-----Original Message-----
Password is a reserved word in Access and is the most
likely culprit Itwill run ok within access, but via ADO.NET, reserved
words cause all kindsof problems. The bandaid is to wrap it in bracekts
[Password] but you or aco-worker will invariably forget this sometime in the
future. IMHO, get ridof it b/c it's not worth the maintenance and headaches
it will likely cause.
HTH,
Bill
"kirk g" <ky*@datatel.co m> wrote in message
news:03******* *************** ******@phx.gbl. .. When I run the following code:
OleDbConnection conn = new OleDbConnection (
@"Provider=Micr osoft.Jet.OLEDB .4.0;Data
Source=C:\money makin.mdb");
String stmt = "INSERT INTO Person (FirstName, LastName, Email, LoginID, Password) VALUES (" +
"'" + this.m_perFirst Name + "', '" +
this.m_perLastN ame +
"', '" + this.m_emailAdd ress + "', '" + this.m_loginID +
"', '" + this.m_password + "')";
MessageBox.Show (stmt);
//conn.Open();
OleDbCommand perCommand = new OleDbCommand
(stmt, conn);
perCommand.Conn ection.Open();
perCommand.Exec uteNonQuery();
//OleDbDataReader perReader =
perCommand.Exec uteNonQuery();
//perReader.Close ();
I get the following error no matter what:
************** Exception Text **************
System.Data.Ole Db.OleDbExcepti on: Syntax error in INSERT INTO statement.
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextErrorHand ling(Int32 hr)
at
System.Data.Ole Db.OleDbCommand .ExecuteCommand TextForSingle Result(tagDBPAR AMS dbParams, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand Text
(Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteCommand
(CommandBehavio r behavior, Object& executeResult)
at System.Data.Ole Db.OleDbCommand .ExecuteReaderI nternal (CommandBehavio r behavior, String method)
at System.Data.Ole Db.OleDbCommand .ExecuteNonQuer y()
at WindowsSample.P erson.saveNewDa ta() in c:\Documents and Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\DataIte ms\Person.cs:li ne 192
at WindowsSample.P ersonalInfo.btn PersonalSave_Cl ick
(Object sender, EventArgs e) in c:\Documents and
Settings\Kirk Gray\My Documents\Borla nd Studio
Projects\Window sSample\Forms\P ersonalInfo.cs: line 326
at System.Windows. Forms.Control.O nClick(EventArg s e)
at System.Windows. Forms.Button.On Click(EventArgs e)
at System.Windows. Forms.Button.On MouseUp
(MouseEventArgs mevent)
at System.Windows. Forms.Control.W mMouseUp(Messag e& m, MouseButtons button, Int32 clicks)
at System.Windows. Forms.Control.W ndProc(Message& m)
at System.Windows. Forms.ButtonBas e.WndProc(Messa ge& m) at System.Windows. Forms.Button.Wn dProc(Message& m)
at System.Windows. Forms.ControlNa tiveWindow.OnMe ssage (Message& m)
at System.Windows. Forms.ControlNa tiveWindow.WndP roc
(Message& m)
at System.Windows. Forms.NativeWin dow.Callback(In tPtr
hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Line 192 refers to the executenonquery () method. I have tested the query by itself in Access, and it inserts the value just fine. Does anyone have any idea what could be wrong? I have tracked it down to the loginID or Password field, as the query works fine without those two in
there, but I am not sure what the problem is. Any help
would be much appreciated!
Kirk
.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Patchwork |
last post by:
Hi Everyone,
Please take a look at the following (simple and fun) program:
////////////////////////////////////////////////////////////////////////////
/////////////
// Monster Munch, example program
#include <list>
|
by: Proteus |
last post by:
Any help appreciated on a small perl project I need to write for
educator/teaching purposes. I have not programmed perl for some time, need
to get up to speed, maybe some kind souls hrere will help me on
this project? It looks to be a simple project, and I will start relearning
pearl, but any help appreciated!
I need to read and parse a simple text file (INPUT) containing multiple
choice quiz questions (with titles) and answers, and...
|
by: Raskolnikow |
last post by:
Hi!
I have a very simple problem with itoa() or the localtime(...).
Sorry, if it is too simple, I don't have a proper example.
Please have a look at the comments.
struct tm *systime;
time_t currentTime;
char day;
char month;
|
by: Peter |
last post by:
Hello
Thanks for reviewing my question. I would like to know how can I programmatically select a node
Thanks in Advanc
Peter
|
by: abcd |
last post by:
I am trying to set up client machine and investigatging which .net
components are missing to run aspx page.
I have a simple aspx page which just has "hello world" printed....
When I request that page like http://machinename/dir1/hellp.aspx
instead of running that page it starts downloding ...whats missing here
....why the aspx engine not running the page....
| | |
by: dba_222 |
last post by:
Dear Experts,
Ok, I hate to ask such a seemingly dumb question, but I've
already spent far too much time on this. More that I
would care to admit.
In Sql server, how do I simply change a character into a number??????
In Oracle, it is:
|
by: Giancarlo Berenz |
last post by:
Hi:
Recently i write this code:
class Simple
{
private:
int value;
public:
int GiveMeARandom(void);
|
by: galiorenye |
last post by:
Hi,
Given this code:
A** ppA = new A*;
A *pA = NULL;
for(int i = 0; i < 10; ++i)
{
pA = ppA;
//do something with pA
|
by: Phillip Taylor |
last post by:
Hi guys, I'm looking to develop a simple web service in VB.NET but I'm
having some trivial issues. In Visual Studio I create a web services
project and change the asmx.vb file to this:
Imports System.Web.Services
Imports System.Web.Services.Protocols
Imports System.ComponentModel
<System.Web.Services.WebService(Namespace:="http://
wwwpreview.#deleted#.co.uk/~ptaylor/Customer.wsdl")_
|
by: Chris M. Thomasson |
last post by:
I use the following technique in all of my C++ projects; here is the example
code with error checking omitted for brevity:
_________________________________________________________________
/* Simple Thread Object
______________________________________________________________*/
#include <pthread.h>
extern "C" void* thread_entry(void*);
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
