Hi all,
I'm pretty new to the embeded VC++, I have version 3 and
was able to develop an ARM version of my little app.
However I need one for the new Dell pocket PC with the
Xscale processor. How do I do that ? Do I need to get a
different SDK ? If so from where can I get it ? I couldn't
find anything yet. I read one post somewhere that said the
Xscale should be able to run ARM version of software, but
from my experience it's not true with my application, as of
now.
Any suggestions are welcome.
Thank you.
Jano 4 1423
Jano
This post will probably disappear very quickly,
but I'd suggest that you go elsewhere for embedded
tools. Wind River or one of their competitors
has much more to offer. MS is behind the curve
in the embedded world, particularly when it
comes to time critical/real time apps. -----Original Message----- Hi all,
I'm pretty new to the embeded VC++, I have version 3 and was able to develop an ARM version of my little app. However I need one for the new Dell pocket PC with the Xscale processor. How do I do that ? Do I need to get a different SDK ? If so from where can I get it ? I
couldn'tfind anything yet. I read one post somewhere that said
theXscale should be able to run ARM version of software, but from my experience it's not true with my application, as
ofnow.
Any suggestions are welcome.
Thank you. Jano
.
Hi Jano,
You should post in the microsoft.publi c.windowsce.emb edded.vc for this
topic. But just to try and answer your question, if you have a very recent
PocketPC it may have PPC2003 on it. If that is the case you need to use eVC4
with the PocketPC 2003 SDK. Otherwise your information re XScale is actually
correct. If this doesn't solve your problem I would suggest you repost in
the above ng with some more details of what went wrong
Cheers
Doug Forster
"Jano" <ja***@phase2on line.com> wrote in message
news:05******** *************** *****@phx.gbl.. . Hi all,
I'm pretty new to the embeded VC++, I have version 3 and was able to develop an ARM version of my little app. However I need one for the new Dell pocket PC with the Xscale processor. How do I do that ? Do I need to get a different SDK ? If so from where can I get it ? I couldn't find anything yet. I read one post somewhere that said the Xscale should be able to run ARM version of software, but from my experience it's not true with my application, as of now.
Any suggestions are welcome.
Thank you. Jano
"Jano" <ja***@phase2on line.com> wrote in message
news:09******** *************** *****@phx.gbl.. . Thank you both for resposnes, I'll post this to the embedded forum.
The actual error I'm getting is: When I try to run a ARM version on Xscale, it starts fine but after opening another Dialog it just freeeeeeezes. Not sure what the problem is.
The program freezes, or the whole device freezes? If the former, have you
tried debugging it at that point to see what is going on? If the latter, see
if maybe you're overflowing the stack.
Ken
"Larry" <le******@bells outh.net> wrote in message
news:04******** *************** *****@phx.gbl.. . This post will probably disappear very quickly, ...
I doubt it.
Regards,
Will This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Jens Thiede |
last post by:
I want to use python heavily on my embeded linux. What would the best
way be to slim down Python. Only keep those modules you would
acctually need, and not imparing Python's capabilities?
Previous experiance would be greatly appreciated,
Jens Thiede.
|
by: Jacek Cz |
last post by:
Do you have some tips about making Python small (minimal list of
modules) and isolated from filesystem. I have an idea
#define Py_WITHOUT_FILES
This switch should disable some function/modules from modules sys,
fileobject, but also import from file, path resolving etd.
|
by: mp |
last post by:
Hi,
I have a Static library application in vc++ which generates
Parser.lib.
I have written a exe application in vc++ that links to Parser.lib.
This does some processing. (This project generates processor.exe) I
have given the path to Parser.lib in the additional library resources
in the linker settings and included a header file Parser.h. This
works perfectly.
|
by: PDQBach |
last post by:
Hello,
im a visual c++ und borland c++builder newbie.
i have witten a simple mandelbrot algorithm and compiled it with both
vc++ (mfc) and cbuilder (vcl) (same code besides the drawing part).
the vc++ version is twice! as fast in release mode. in debug mode its
as fast as cbuilder. it seems i cant get cbuilder to compile a real
release version. when i check "Project options:compiler:release" it
even gets slower than debug! i have played...
|
by: John Ortt |
last post by:
Hi there,
I am trying to do a two level embeded query but it is causing Dr Watson
errors.
The line which is causing the problem is:
CFCDeci: (Select sum (FlexChangeDeci) FROM as WHERE
(. <= .) and (. >=
.);)
| |
by: Colin Thomsen |
last post by:
I have a native VC++ application which runs differently
(incorrectly) if the .NET framework is installed.
A trimmed version of the app is shown below. The
intention is for the SEHHandler to catch any exceptions
which are not handled by the program. It is enabled using
the SetUnhandledExceptionFilter call.
The Pdh calls are intended to add a counter to enable
retrieval of CPU usage (not included in this trimmed
|
by: Frederico Pissarra |
last post by:
Recently I tried to use -G5 option on CL compiler (from Visual Studio
2005)... To my surprise, there is no processor specific optimizations
anymore! Is that correct?
Is so, why?
s
Fred
|
by: fabien.lyon |
last post by:
-----Message d'origine-----
De : fabien.lyon
Envoyé : mercredi 30 mai 2007 20:16
À : 'python-list@python.org'
Objet : RE: embeded python progam into visual C++ application crash
2.5.1 is compiled with Visual Studio 2005 - I hope you had no problems
with VC++ 6.0?
|
by: nagamohanp |
last post by:
Hi,
The output of the pl files to be displayed in my vc++ application. I used Embeded Perl for it. I have to support Japanese for the application.
The samp.pl file contains the following code
print "こんにちは "; #print "Hello"
For converting string to Unicode, I used the following code
STRLEN Len;
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
| |
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |