The stuff below seems to work, when I am applying the logic for suppression.
However, it doesn't work when suppressing row data. Any Ideas?
Basically, if there is only one row of data, I need to suppress a caption
and it corresponding data field.
Create a formula field
@RowCount Formula Field
shared numbervar RowCount;
RowCount := RowCount +1
Add a condition to the object to suppress
Suppress Condition
{@RowCount}<2;
TIA 1 14537
I figured it out.
apply the same logic for the captions, for the field data
onlastrecord and recordnumber = 1;
because I would like the columns to "shift" to the left, I have two copies
of the caption and field on the report.
to suppress the "shifted" copy of the data field, I use XOR
onlastrecord xor recordnumber=1;
both recordnumber and onlastrecord are built in functions.
Hope that helps anyone.
"AMDRIT" <am****@hotmail .com> wrote in message
news:uB******** ******@tk2msftn gp13.phx.gbl... The stuff below seems to work, when I am applying the logic for suppression. However, it doesn't work when suppressing row data. Any Ideas?
Basically, if there is only one row of data, I need to suppress a caption and it corresponding data field.
Create a formula field @RowCount Formula Field
shared numbervar RowCount; RowCount := RowCount +1
Add a condition to the object to suppress Suppress Condition {@RowCount}<2; TIA This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Sangeeta Poddar |
last post by:
Hi All,
I am having a problem with Crystal Report that comes with VS.Net.
It goes like this:
I have a page footer which needs to be suppressed conditionally. When the
conditional suppression is in effect, Crystal Reports (CR) only suppresses
the contents of the page footer; the space the page footers occupy still
appears as large blank spaces at the bottom of the report.
|
by: Gheaci Maschl |
last post by:
Hi all!
I would like to have your opinion about my problem and my proposal how
to solve it:
Ingredients:
- BTriev database
- Crystal Reports
- maybe MS Access
- Liinos6 (small ERP software)
|
by: p |
last post by:
WE had a Crystal 8 WebApp using vs 2002 which we upgraded to VS2003. I also
have Crystal 9 pro on my development machine. The web app runs fine on my
dev machine but am having problems deploying. I created the websetup and
built the MSI, have the bundled version. Copied to webserver and ran
Websetup.msi. Said I had to remove old version, which I did, then reran
WebSetup.msi and keeps giving me this error. "The installer was interrupted...
|
by: Georgess |
last post by:
Hi
I have a problem with a crystal reports viewer I have developed with VS.Net 2003. Everything was working fine until I tried to view reports with suppression formulas...
Eg. suppress (no Drill Down) group header 3 when: DrillDownGroupLevel <
this formula should return True or false and work fine when I run it in crystal report v9
but with the viewer I get the error message
"Error in File ReportPath\ReportName.rp
Error in formula...
|
by: AMDRIT |
last post by:
The stuff below seems to work, when I am applying the logic for suppression.
However, it doesn't work when suppressing row data. Any Ideas?
Basically, if there is only one row of data, I need to suppress a caption
and it corresponding data field.
Create a formula field
@RowCount Formula Field
| |
by: VMI |
last post by:
I know this may not be the best NG for this, but I feel you guys know more
about this than any of the other NGs.
I need to build several simple reports (over 50 of them and they get their
data from sql server) and I was wondering whish of these is the better tool
.. We're still not sure if they'll be loaded from an existing VB6 application
or if I'll have to make a separate module for them (in .Net).
In general, which is the better tool?...
|
by: lucoto |
last post by:
Hello,
I'm trying to use Crystal Reports in my application but I'm not sure if
it's possible in Crystal to do what I need. My app generates an array
of reports:
Report rep_array;
class Report
{
int some;
int useless;
|
by: nathancockram |
last post by:
In the Cross-Tab Expert I have the following values:
Columns --Table.ValY
Rows --Table.ValX
Summarized Fields --Table.Val1, Table.Val2, Table.Val3, Table.Val4,
Table.Val5
CASE 1 CASE 2
Table.Val1 :: 0 3
Table.Val2 :: 0 0
|
by: Miro |
last post by:
Hi,
Just wondering what a good book is on visual studios 2008 ( or 2005 if no
2008 ) that teaches you how to properly use crystal reports with it.
Or im assuming that as long as I can create a dataset and link it to a
reportviewer than any Crystal Report book will do.
I use vb.net but im assuming most books would show you vb and c
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
| |
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |