Hi,
I'm creating an AppDomain and creating an instance of a class. This works
fine unless I use caching, which I need to use.
The exception that I get is of type "System.IO.File LoadException" which
message is:
{"The given assembly name or codebase, 'MyAssemblyDisp layName', was
invalid." }
The stack trace is:
"
Server stack trace:
at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
throwOnFileNotF ound, Assembly locationHint, StackCrawlMark& stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
Boolean stringized, Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String typeName,
Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[] args,
CultureInfo culture, Object[] activationAttri butes, Evidence securityInfo,
StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String typeName)\r
at System.AppDomai n.CreateInstanc e(String assemblyName, String typeName)\r
at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName, String
typeName)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
mb, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInConte xt,
Object[]& outArgs)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age msg, Int32 methodPtr, Boolean fExecuteInConte xt)
Exception rethrown at [0]:
"
I have set permissions for the user everyone on the cache directory.
The source code I am using is:
appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works well
MyClass myClass = (MyClass)
appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
Thanks a lot.
Pablo.
6  6030 
What are the values of the assemblyDisplay Name and myClassDisplayN ame
arguments you are passing to CreateInstanceA ndUnwrap?
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:73******** *************** ***********@mic rosoft.com... Hi,
I'm creating an AppDomain and creating an instance of a class. This works
fine unless I use caching, which I need to use.
The exception that I get is of type "System.IO.File LoadException" which
message is:
{"The given assembly name or codebase, 'MyAssemblyDisp layName', was
invalid." }
The stack trace is:
"
Server stack trace:
at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
throwOnFileNotF ound, Assembly locationHint, StackCrawlMark& stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String typeName,
Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[]
args,
CultureInfo culture, Object[] activationAttri butes, Evidence securityInfo,
StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String
typeName)\r
at System.AppDomai n.CreateInstanc e(String assemblyName, String
typeName)\r
at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName, String
typeName)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
mb, Object[] args, Object server, Int32 methodPtr, Boolean
fExecuteInConte xt,
Object[]& outArgs)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
msg, Int32 methodPtr, Boolean fExecuteInConte xt)
Exception rethrown at [0]:
"
I have set permissions for the user everyone on the cache directory.
The source code I am using is:
appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works well
MyClass myClass = (MyClass)
appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
Thanks a lot.
Pablo.
Dear David,
Thanks for your interest. They are like this:
assemblyname: MyCompany.Solut ions.MyProduct. MyAssemblyName
typename: MyCompany.Solut ions.MyProduct. MyAssemblyName. MyTypeName
As you can see I'm passing just the name with its full namespace to the
CreateInstanceA ndUnwrap method. Besides, it works well if I do not use
caching, so I think this values are right.
What do u think it is happening ? thanks again.
Pablo
"David Levine" wrote: What are the values of the assemblyDisplay Name and myClassDisplayN ame
arguments you are passing to CreateInstanceA ndUnwrap?
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:73******** *************** ***********@mic rosoft.com... Hi,
I'm creating an AppDomain and creating an instance of a class. This works
fine unless I use caching, which I need to use.
The exception that I get is of type "System.IO.File LoadException" which
message is:
{"The given assembly name or codebase, 'MyAssemblyDisp layName', was
invalid." }
The stack trace is:
"
Server stack trace:
at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
throwOnFileNotF ound, Assembly locationHint, StackCrawlMark& stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
stackMark)\r
at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String typeName,
Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[]
args,
CultureInfo culture, Object[] activationAttri butes, Evidence securityInfo,
StackCrawlMark& stackMark)\r
at System.Activato r.CreateInstanc e(String assemblyName, String
typeName)\r
at System.AppDomai n.CreateInstanc e(String assemblyName, String
typeName)\r
at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName, String
typeName)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
mb, Object[] args, Object server, Int32 methodPtr, Boolean
fExecuteInConte xt,
Object[]& outArgs)\r
at
System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
msg, Int32 methodPtr, Boolean fExecuteInConte xt)
Exception rethrown at [0]:
"
I have set permissions for the user everyone on the cache directory.
The source code I am using is:
appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works well
MyClass myClass = (MyClass)
appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
Thanks a lot.
Pablo.
Is the actual name of the assembly
MyCompany.Solut ions.MyProduct. MyAssemblyName. DLL? Or are you including the
namespace as part of the assembly name? If so, don't do that. Also, make
sure that the assembly is in a directory that is located by the normal
probing that the fusion layer uses. You should also look at fuslogvw.exe and
see if it is able to locate the assembly and if not, why not.
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:09******** *************** ***********@mic rosoft.com... Dear David,
Thanks for your interest. They are like this:
assemblyname: MyCompany.Solut ions.MyProduct. MyAssemblyName
typename: MyCompany.Solut ions.MyProduct. MyAssemblyName. MyTypeName
As you can see I'm passing just the name with its full namespace to the
CreateInstanceA ndUnwrap method. Besides, it works well if I do not use
caching, so I think this values are right.
What do u think it is happening ? thanks again.
Pablo
"David Levine" wrote:
What are the values of the assemblyDisplay Name and myClassDisplayN ame
arguments you are passing to CreateInstanceA ndUnwrap?
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:73******** *************** ***********@mic rosoft.com... > Hi,
> I'm creating an AppDomain and creating an instance of a class. This
> works
> fine unless I use caching, which I need to use.
> The exception that I get is of type "System.IO.File LoadException" which
> message is:
>
> {"The given assembly name or codebase, 'MyAssemblyDisp layName', was
> invalid." }
>
> The stack trace is:
>
> "
> Server stack trace:
> at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
> codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
> throwOnFileNotF ound, Assembly locationHint, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
> Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
> Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName,
> Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[]
> args,
> CultureInfo culture, Object[] activationAttri butes, Evidence
> securityInfo,
> StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName,
> String
> typeName)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
> mb, Object[] args, Object server, Int32 methodPtr, Boolean
> fExecuteInConte xt,
> Object[]& outArgs)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
> msg, Int32 methodPtr, Boolean fExecuteInConte xt)
>
> Exception rethrown at [0]:
> "
>
> I have set permissions for the user everyone on the cache directory.
> The source code I am using is:
>
>
> appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
> appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works
> well
>
> MyClass myClass = (MyClass)
> appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
>
> Thanks a lot.
> Pablo.
Ok, thanks again for answering.
The actual name of the assembly is
MyCompany.Solut ions.MyProduct. MyAssemblyName. DLL.
I will probe the utility you mention. I hope I will do it tomorrow.
Thanks again.
Pablo
"David Levine" wrote: Is the actual name of the assembly
MyCompany.Solut ions.MyProduct. MyAssemblyName. DLL? Or are you including the
namespace as part of the assembly name? If so, don't do that. Also, make
sure that the assembly is in a directory that is located by the normal
probing that the fusion layer uses. You should also look at fuslogvw.exe and
see if it is able to locate the assembly and if not, why not.
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:09******** *************** ***********@mic rosoft.com... Dear David,
Thanks for your interest. They are like this:
assemblyname: MyCompany.Solut ions.MyProduct. MyAssemblyName
typename: MyCompany.Solut ions.MyProduct. MyAssemblyName. MyTypeName
As you can see I'm passing just the name with its full namespace to the
CreateInstanceA ndUnwrap method. Besides, it works well if I do not use
caching, so I think this values are right.
What do u think it is happening ? thanks again.
Pablo
"David Levine" wrote:
What are the values of the assemblyDisplay Name and myClassDisplayN ame
arguments you are passing to CreateInstanceA ndUnwrap?
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:73******** *************** ***********@mic rosoft.com...
> Hi,
> I'm creating an AppDomain and creating an instance of a class. This
> works
> fine unless I use caching, which I need to use.
> The exception that I get is of type "System.IO.File LoadException" which
> message is:
>
> {"The given assembly name or codebase, 'MyAssemblyDisp layName', was
> invalid." }
>
> The stack trace is:
>
> "
> Server stack trace:
> at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
> codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
> throwOnFileNotF ound, Assembly locationHint, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
> Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
> Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName,
> Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[]
> args,
> CultureInfo culture, Object[] activationAttri butes, Evidence
> securityInfo,
> StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName,
> String
> typeName)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
> mb, Object[] args, Object server, Int32 methodPtr, Boolean
> fExecuteInConte xt,
> Object[]& outArgs)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
> msg, Int32 methodPtr, Boolean fExecuteInConte xt)
>
> Exception rethrown at [0]:
> "
>
> I have set permissions for the user everyone on the cache directory.
> The source code I am using is:
>
>
> appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
> appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works
> well
>
> MyClass myClass = (MyClass)
> appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
>
> Thanks a lot.
> Pablo.
Dear David,
I am trying fusloggvw but no information is reported. Additionally, I have
set the registry key 'ForceLog', but nohting is displayed.
Do you have another idea ??
Thanks again.
Pablo.
"David Levine" wrote: Is the actual name of the assembly
MyCompany.Solut ions.MyProduct. MyAssemblyName. DLL? Or are you including the
namespace as part of the assembly name? If so, don't do that. Also, make
sure that the assembly is in a directory that is located by the normal
probing that the fusion layer uses. You should also look at fuslogvw.exe and
see if it is able to locate the assembly and if not, why not.
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:09******** *************** ***********@mic rosoft.com... Dear David,
Thanks for your interest. They are like this:
assemblyname: MyCompany.Solut ions.MyProduct. MyAssemblyName
typename: MyCompany.Solut ions.MyProduct. MyAssemblyName. MyTypeName
As you can see I'm passing just the name with its full namespace to the
CreateInstanceA ndUnwrap method. Besides, it works well if I do not use
caching, so I think this values are right.
What do u think it is happening ? thanks again.
Pablo
"David Levine" wrote:
What are the values of the assemblyDisplay Name and myClassDisplayN ame
arguments you are passing to CreateInstanceA ndUnwrap?
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:73******** *************** ***********@mic rosoft.com...
> Hi,
> I'm creating an AppDomain and creating an instance of a class. This
> works
> fine unless I use caching, which I need to use.
> The exception that I get is of type "System.IO.File LoadException" which
> message is:
>
> {"The given assembly name or codebase, 'MyAssemblyDisp layName', was
> invalid." }
>
> The stack trace is:
>
> "
> Server stack trace:
> at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
> codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
> throwOnFileNotF ound, Assembly locationHint, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName assemblyRef,
> Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
> stackMark)\r
> at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
> Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName,
> Boolean ignoreCase, BindingFlags bindingAttr, Binder binder, Object[]
> args,
> CultureInfo culture, Object[] activationAttri butes, Evidence
> securityInfo,
> StackCrawlMark& stackMark)\r
> at System.Activato r.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc e(String assemblyName, String
> typeName)\r
> at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName,
> String
> typeName)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
> mb, Object[] args, Object server, Int32 methodPtr, Boolean
> fExecuteInConte xt,
> Object[]& outArgs)\r
> at
> System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
> msg, Int32 methodPtr, Boolean fExecuteInConte xt)
>
> Exception rethrown at [0]:
> "
>
> I have set permissions for the user everyone on the cache directory.
> The source code I am using is:
>
>
> appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
> appDomain.SetSh adowCopyFiles() ; //if i skip this, the following works
> well
>
> MyClass myClass = (MyClass)
> appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
>
> Thanks a lot.
> Pablo.
Try specifying the complete assembly name, which is "AssemblyNa me,
Version=xxx, Culture=xxx, PublicKeyToken= xxx"
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:39******** *************** ***********@mic rosoft.com... Dear David,
I am trying fusloggvw but no information is reported. Additionally, I have
set the registry key 'ForceLog', but nohting is displayed.
Do you have another idea ??
Thanks again.
Pablo.
"David Levine" wrote:
Is the actual name of the assembly
MyCompany.Solut ions.MyProduct. MyAssemblyName. DLL? Or are you including
the
namespace as part of the assembly name? If so, don't do that. Also, make
sure that the assembly is in a directory that is located by the normal
probing that the fusion layer uses. You should also look at fuslogvw.exe
and
see if it is able to locate the assembly and if not, why not.
"Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
news:09******** *************** ***********@mic rosoft.com... > Dear David,
> Thanks for your interest. They are like this:
> assemblyname: MyCompany.Solut ions.MyProduct. MyAssemblyName
> typename: MyCompany.Solut ions.MyProduct. MyAssemblyName. MyTypeName
>
> As you can see I'm passing just the name with its full namespace to the
> CreateInstanceA ndUnwrap method. Besides, it works well if I do not use
> caching, so I think this values are right.
>
> What do u think it is happening ? thanks again.
> Pablo
>
>
> "David Levine" wrote:
>
>> What are the values of the assemblyDisplay Name and myClassDisplayN ame
>> arguments you are passing to CreateInstanceA ndUnwrap?
>>
>> "Pablo" <Pa***@discussi ons.microsoft.c om> wrote in message
>> news:73******** *************** ***********@mic rosoft.com...
>> > Hi,
>> > I'm creating an AppDomain and creating an instance of a class. This
>> > works
>> > fine unless I use caching, which I need to use.
>> > The exception that I get is of type "System.IO.File LoadException"
>> > which
>> > message is:
>> >
>> > {"The given assembly name or codebase, 'MyAssemblyDisp layName', was
>> > invalid." }
>> >
>> > The stack trace is:
>> >
>> > "
>> > Server stack trace:
>> > at System.Reflecti on.Assembly.nLo ad(AssemblyName fileName, String
>> > codeBase, Boolean isStringized, Evidence assemblySecurit y, Boolean
>> > throwOnFileNotF ound, Assembly locationHint, StackCrawlMark&
>> > stackMark)\r
>> > at System.Reflecti on.Assembly.Int ernalLoad(Assem blyName
>> > assemblyRef,
>> > Boolean stringized, Evidence assemblySecurit y, StackCrawlMark&
>> > stackMark)\r
>> > at System.Reflecti on.Assembly.Int ernalLoad(Strin g assemblyString,
>> > Evidence assemblySecurit y, StackCrawlMark& stackMark)\r
>> > at System.Activato r.CreateInstanc e(String assemblyName, String
>> > typeName,
>> > Boolean ignoreCase, BindingFlags bindingAttr, Binder binder,
>> > Object[]
>> > args,
>> > CultureInfo culture, Object[] activationAttri butes, Evidence
>> > securityInfo,
>> > StackCrawlMark& stackMark)\r
>> > at System.Activato r.CreateInstanc e(String assemblyName, String
>> > typeName)\r
>> > at System.AppDomai n.CreateInstanc e(String assemblyName, String
>> > typeName)\r
>> > at System.AppDomai n.CreateInstanc eAndUnwrap(Stri ng assemblyName,
>> > String
>> > typeName)\r
>> > at
>> > System.Runtime. Remoting.Messag ing.StackBuilde rSink.PrivatePr ocessMessage(Me thodBase
>> > mb, Object[] args, Object server, Int32 methodPtr, Boolean
>> > fExecuteInConte xt,
>> > Object[]& outArgs)\r
>> > at
>> > System.Runtime. Remoting.Messag ing.StackBuilde rSink.SyncProce ssMessage(IMess age
>> > msg, Int32 methodPtr, Boolean fExecuteInConte xt)
>> >
>> > Exception rethrown at [0]:
>> > "
>> >
>> > I have set permissions for the user everyone on the cache directory.
>> > The source code I am using is:
>> >
>> >
>> > appDomain.SetSh adowCopyPath(ap pDomain.BaseDir ectory);
>> > appDomain.SetSh adowCopyFiles() ; //if i skip this, the following
>> > works
>> > well
>> >
>> > MyClass myClass = (MyClass)
>> > appDomain.Creat eInstanceAndUnw rap(assemblyDis playName,myClas sDisplayName);
>> >
>> > Thanks a lot.
>> > Pablo.
>>
>>
>>
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: TWACS |
last post by:
How do I add and get session defined variables?
when I do this Session("USERID") = "NAME"; I get
System.Web.UI.Page.Session' denotes a 'property' where a 'method' was
expected
Thanks,
|
by: cylin |
last post by:
Dear all,
To do below is too long.
cout << "Name: " << name << ", Age: " << age << endl;
Can cout use "%" to implement?
Thanks.
cylin.
|
by: dice |
last post by:
I have built a .NET based service that uses a number of related 3rd party dlls.
If I compile my code into a dll and use this in a test app all is well -
however if I compile my code as a service and try to run the service I get
the following exception:
System.IO.FileNotFoundException: The specified module could not be found.
at CES.VendClientInt.VendClient.GetCardTypes(...)
at YQ_Epos_server.CodeHandler.start(...)
I have tried copying...
|
by: Unbiased_me |
last post by:
Hi There
I recently read in book that the C compiler is written in C. I unable
to comprehend the concept behind this. How is the compiler design
started...Where dodoes one start.
I tried Googling for the answer that C is written in C, however the
web search proved futile.
C # and .net is written in .net...What!, and the list goes on
|
by: Gustavo L. Fabro |
last post by:
Greetings!
I'm testing VS 2005 Beta 2, and I've compiled a program that
runs just fine on my computer (where VS is installed).
I've tried to run this same program on another computer
(after having installed MS .NET Framework 2.0 Beta 2 on it,
from
http://www.microsoft.com/downloads/details.aspx?FamilyId=7ABD8C8F-287E-4C7E-9A4A-A4ECFF40FC8E&displaylang=en),
but got the following message:
| | |
by: fabrice |
last post by:
Hello
I'm getting an error during a .vb file compilation.
My command is :
vbc /t:library /r:system.web.dll /r:system.dll /r:mscorlib.dll myFile.vb
The error is :
|
by: Pablo |
last post by:
Hi,
I'm creating an AppDomain and creating an instance of a class. This works
fine unless I use caching, which I need to use.
The exception that I get is of type "System.IO.FileLoadException" which
message is:
{"The given assembly name or codebase, 'MyAssemblyDisplayName', was
invalid." }
The stack trace is:
|
by: Richard Bysouth |
last post by:
Hi
When attempting to view inherited forms in design mode I have been getting
the message "The path is not of a legal form" and am unable to view the
designer.
I can't seem to find any further information on this error - does anyone
know what the problem and resolution might be?
thanks
|
by: Chris |
last post by:
Hi,
I installed Visual Studio 2005 SP1, my application does not start on
machines without Visual Studio installed any more. It was working without
SP1.
After searching the web, it seems caused by manifest file, I changed link
option to generate external manifest file. The manifest lists dependency to
two version of CRTs, is that the problem and why it lists both?
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
| | |
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert into image.
Globals.ThisAddIn.Application.ActiveDocument.Select();...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| | |
