I have a design problem involving a ListView control on a Windows form.
What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCh eck
event that has occurred because of a mouse click on a Checkbox, and one
that has occurred because the .Checked property of an item has been
changed programatically ?
More details if needed, but if you can answer the above, you'll have
solved the problem! :)
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ 4 2449
Hi Mike
I use the Infragistics components, and there is a BeforeCheck event.
What I am doing is allowing code to change the check state, but not the user
by clicking an item.
The way I got round the problem you illustrate is to implement the
BeforeCheck handler and always cancel the attempt to check/uncheck the box.
Then, in the code that is allowed to change the state, I remove the handler,
change the state, and then add the handler again. A bit crude, but it works.
Alternatively, set a flag before you make the change in code, and test the
flag in the BeforeCheck event.
One other possibility is that check boxes have an AutoCheck property. If you
set that to false it allows you to control when the check box is checked.
HTH
Charles
"Mike Ruane-Torr" <mike.ruane-torr@USE_EVENS_ ixwiflaoyn.net> wrote in
message news:op******** ******@msnews.m icrosoft.com... I have a design problem involving a ListView control on a Windows form. What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCh eck event that has occurred because of a mouse click on a Checkbox, and one that has occurred because the .Checked property of an item has been changed programatically ?
More details if needed, but if you can answer the above, you'll have solved the problem! :)
-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
Hi Mike
I use the Infragistics components, and there is a BeforeCheck event.
What I am doing is allowing code to change the check state, but not the user
by clicking an item.
The way I got round the problem you illustrate is to implement the
BeforeCheck handler and always cancel the attempt to check/uncheck the box.
Then, in the code that is allowed to change the state, I remove the handler,
change the state, and then add the handler again. A bit crude, but it works.
Alternatively, set a flag before you make the change in code, and test the
flag in the BeforeCheck event.
One other possibility is that check boxes have an AutoCheck property. If you
set that to false it allows you to control when the check box is checked.
HTH
Charles
"Mike Ruane-Torr" <mike.ruane-torr@USE_EVENS_ ixwiflaoyn.net> wrote in
message news:op******** ******@msnews.m icrosoft.com... I have a design problem involving a ListView control on a Windows form. What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCh eck event that has occurred because of a mouse click on a Checkbox, and one that has occurred because the .Checked property of an item has been changed programatically ?
More details if needed, but if you can answer the above, you'll have solved the problem! :)
-- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
On Fri, 2 Apr 2004 14:58:01 +0100, Charles Law <bl***@nowhere. com> wrote: The way I got round the problem you illustrate is to implement the BeforeCheck handler and always cancel the attempt to check/uncheck the box. Then, in the code that is allowed to change the state, I remove the handler, change the state, and then add the handler again. A bit crude, but it works.
I considered this kind of approach, but thought that it might not be
thread-safe. Perhaps I should try it.
Alternatively, set a flag before you make the change in code, and test the flag in the BeforeCheck event.
I think that would definitely NOT be thread-safe.
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
On Fri, 2 Apr 2004 14:58:01 +0100, Charles Law <bl***@nowhere. com> wrote: The way I got round the problem you illustrate is to implement the BeforeCheck handler and always cancel the attempt to check/uncheck the box. Then, in the code that is allowed to change the state, I remove the handler, change the state, and then add the handler again. A bit crude, but it works.
I considered this kind of approach, but thought that it might not be
thread-safe. Perhaps I should try it.
Alternatively, set a flag before you make the change in code, and test the flag in the BeforeCheck event.
I think that would definitely NOT be thread-safe.
--
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: Mike Ruane-Torr |
last post by:
I have a design problem involving a ListView control on a Windows form.
What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCheck
event that has occurred because of a mouse click on a Checkbox, and one
that has occurred because the .Checked property of an item has been
changed...
|
by: Mike Ruane-Torr |
last post by:
I have a design problem involving a ListView control on a Windows form.
What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCheck
event that has occurred because of a mouse click on a Checkbox, and one
that has occurred because the .Checked property of an item has been
changed...
|
by: |
last post by:
Hello,
I have a ListView control in Details view. When an item is un-checked, I
want to change the ForeColor.
The only way I have found to do this is to loop through all the items of the
ListView in its Click, DoubleClick, and KeyPress events using the sub below
.. However, the ListView can potentially hold hundreds of items, so this...
|
by: Mike Ruane-Torr |
last post by:
I have a design problem involving a ListView control on a Windows form.
What it boils down to is the following question:
Q: Is there a way to tell the difference between a ListView.ItemCheck
event that has occurred because of a mouse click on a Checkbox, and one
that has occurred because the .Checked property of an item has been
changed...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
| |
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language...
|
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it. ...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes...
|
by: conductexam |
last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one.
At the time of converting from word file to html my equations which are in the word document file was convert...
| |
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in...
|
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |