Hey Frank, I'm a novice with this taking over someone elses application.
I'm attempting to add a dataset to a page. I have the query to populate
the page and I have the walkthrough instructions. Visual Studios does
not want to cooperate. This is what I'm following: To generate a
dataset
From the Data menu, choose Generate DataSet.
Tip If the Generate DataSet command is not enabled, click the page;
the page must have focus for the command to appear.
The Generate Dataset dialog box appears.
This is where my problem starts. I click the page but the Gen dataset
command is not enabled.
GDawkins
*** Sent via Developersdex http://www.developersdex.com ***
Don't just participate in USENET...get rewarded for it! 3 2185
Hi,
Right click on dataadapter that has the query and choose generate datast
from popup menu.
--
Miha Markic - RightHand .NET consulting & software development
miha at rthand com www.rthand.com
"Garry Dawkins" <ga**********@h otmail.com> wrote in message
news:eA******** *****@tk2msftng p13.phx.gbl... Hey Frank, I'm a novice with this taking over someone elses application. I'm attempting to add a dataset to a page. I have the query to populate the page and I have the walkthrough instructions. Visual Studios does not want to cooperate. This is what I'm following: To generate a dataset From the Data menu, choose Generate DataSet. Tip If the Generate DataSet command is not enabled, click the page; the page must have focus for the command to appear. The Generate Dataset dialog box appears. This is where my problem starts. I click the page but the Gen dataset command is not enabled.
GDawkins
*** Sent via Developersdex http://www.developersdex.com *** Don't just participate in USENET...get rewarded for it!
Hi,
I'm having the same problem. When I right click the dataadapter and
choose "generate dataset" I get an alert box with the insightful
message "Unspecifie d error".
I added a field to a MS Access table that one of the dataAdapters on
the page used...
Thanks
--Dietrich
Miha Markic wrote: Hi,
Right click on dataadapter that has the query and choose generate
datast from popup menu.
-- Miha Markic - RightHand .NET consulting & software development miha at rthand com www.rthand.com
"Garry Dawkins" <ga**********@h otmail.com> wrote in message news:eA******** *****@tk2msftng p13.phx.gbl... Hey Frank, I'm a novice with this taking over someone elses
application. I'm attempting to add a dataset to a page. I have the query to
populate the page and I have the walkthrough instructions. Visual Studios
does not want to cooperate. This is what I'm following: To generate a dataset From the Data menu, choose Generate DataSet. Tip If the Generate DataSet command is not enabled, click the
page; the page must have focus for the command to appear. The Generate Dataset dialog box appears. This is where my problem starts. I click the page but the Gen
dataset command is not enabled.
GDawkins
*** Sent via Developersdex http://www.developersdex.com *** Don't just participate in USENET...get rewarded for it!
Hi,
First of all, did you add this question to another question, because I get
this as an answer and it is obvious a question.
As answer probably there is some orphaned code in your application. Most
probably a class which you cannot see when in your solution explorer there
are hidden files.
To test if this can be it, than the most simple is to create a little
project and do what you did (and not building a difficult select string).
I hope this helps,
Cor This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics |
by: jtsree |
last post by:
i am using Visual Studio.net professional 2003 (VisualBasic.net).I am
building a very very simple project where i need to connect to Microsoft
access database through OledbDataAdapter in design mode by Dragging the
OledbDataAdapter Control from the Data tab on the ToolBox and then generate
the DataSet.
I am able to connect to MS ACCESS and test connection is succedded.Now when
i try to generate the Dataset by Right Clicking The Data...
|
by: jtsree |
last post by:
I am Using (Windows XP) Visual Studio.net 2003 professional edition working
on VB.net language.
I am bulding a very very simple project in VB.net where i connect to Access
Database by dragging OledbDataAdapter tool from the Data tab of the Toolbox.
When OledbDataAdapter has been added to the Component tray i am able to
generate a connection to Access database and generate Connection object and
also the Test Connection has Succeeded.
Now...
|
by: Ook |
last post by:
I think I'm being bitten by holes in the documentation - documentation that
assumes a certain knowledge of how dotnet works, knowledge that I lack :-)
I downloaded and installed odbc.net. I *finally* figured out how to add the
odbcDataAdaptor and odbcConnection to the toolbox, no thanks to the
documentation. So, now I have component1.cs on webform1.aspx. I have a MySQL
database up and running. I have odbcDataAdapter1 and odbcConnection1...
|
by: ASP.Net programmer |
last post by:
I have a few SQLDataAdapters which select a MAX() value from a few
different tables.
Here is a sample of the SQL statement:
SELECT MAX(startdate) AS startdate
FROM some_table1
WHERE (startdate <= GETDATE())
The problem I have is this: When I select a few of those SQLDataAdapters
to generate a DataSet from them the list of DataAdapters shows:
|
by: pete |
last post by:
Help, I can not find this data wizard in my toolbox under data.
To generate a dataset
1.. From the Data menu, choose Generate DataSet.
Tip If you do not see the Data menu, click in the form; the form must
have focus for the menu to appear.
The Generate Dataset dialog box is displayed.
| |
by: sambuela |
last post by:
All data controls and wizards
about dataset, adapter or dataviewer disappear in the IDE.
How can i let them appear again?
It is because i want to generate dataset by these wizard.
Thanks in advance.
ps. After i try to use previous generated adapter, i still can't
generate new dataset for it.
|
by: Garry Dawkins |
last post by:
Hey Frank, I'm a novice with this taking over someone elses application.
I'm attempting to add a dataset to a page. I have the query to populate
the page and I have the walkthrough instructions. Visual Studios does
not want to cooperate. This is what I'm following: To generate a
dataset
From the Data menu, choose Generate DataSet.
Tip If the Generate DataSet command is not enabled, click the page;
the page must have focus for the...
|
by: abc my vclass |
last post by:
How to generate a dataset from stored procedure which have many resultsets?
I try Dataset designer from VS2005, it only generate first table from stored
procedure on server explorer. Another table cannot to generate. How should
I do?
|
by: ergolargo |
last post by:
Hello all
Apologies if I've picked the wrong forum, but can anybody offer assistance to me? I'm definitely struggling to get my first data access layer generated using the Dataset Designer in Visual Studio 2005. I just can't believe how difficult the process of generating a class library DLL from an XSD file is proving to be, I'm sure I'm not trying to do anything fancy, it seems like it should be very basic functionality to me, so I must be...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that captivates audiences and drives business growth.
The Art of Business Website Design
Your website is...
|
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
| |
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |