I am sure you have all heard this same question many times but I haven't been able to find any posts on it. But I was wondering how to connect to the linternet using a live CD of Knoppix. Is this even possible and if it isn't can you please help me to connect to the internet with any Linux OS.
Any help is much appreciated.
5 2644
I am sure you have all heard this same question many times but I haven't been able to find any posts on it. But I was wondering how to connect to the linternet using a live CD of Knoppix. Is this even possible and if it isn't can you please help me to connect to the internet with any Linux OS.
Any help is much appreciated.
As far as I know, live CD distributions such as Knoppix, auto detect your hardware configuration and then use DHCP to automatically obtain an IP for your computer. It should then be a simple matter of opening up a web browser.
If you're not auto connecting, then perhaps either you don't have a card that's supported by default. That, or your router isn't running in DHCP mode and you will have to specify an IP. We would need to know more about your network setup in general.
As far as I know, live CD distributions such as Knoppix, auto detect your hardware configuration and then use DHCP to automatically obtain an IP for your computer. It should then be a simple matter of opening up a web browser.
If you're not auto connecting, then perhaps either you don't have a card that's supported by default. That, or your router isn't running in DHCP mode and you will have to specify an IP. We would need to know more about your network setup in general.
My network setup uses a Linksys card to connect to the internet. As for the DHCP mode, I don't know but I'll check into it.
I am sorry but I tried to check my DHCP settings but I can't figure out how to do it. Can someone help me?
Run the command /sbin/ifconfig
With any luck, there should be at least 2 rows. We're not interested in the "lo" row. There should be a row titled "eth0" or "ath0", or something to that effect. We're also interested in the second line; inet addr:xxx.xxx.xx x.xxx
Can you post the output of running /sbin/ifconfig here.
Also, if you have a router, connect to the admin interface and check the routing tables to see how many IPs it has automatically allocated. If you're not sure if you're using static or dhcp, then you're almosty likely using dhcp on your router. It's just a matter of firstly, knowing if your card is supported by linux and second, enabling dhcp (which I think is on by default with knoppix).
Alright I found the problem. Mainly right now to fix it would cost some good money which I don't really have. Now I have only one question. Could you take a DSL phone line and hook it directly up to your computer and skip the modem, cause if you can't I will need about 30 or 40 dollars and I just don't have it right now.
Sign in to post your reply or Sign up for a free account.
Similar topics |
by: Shweta |
last post by:
Hi,
I am trying to connect to esatblish FTP connection using WinInet
APIs.I am on LAN connecting via proxy to internet.
First call InternetOpen() is fine, however the call to
InternetConnect() return error 'The server name could not be
resolved'.I have tried accessing the same site through IE and it works
fine.Also the proxy server...
|
by: Matt |
last post by:
I know it is possible to establish a connection to an SQL Server over
the Internet via Enterprise Manager. My question is, how secure is this
connection? Is there a best practices document for this type of
connection?
Here is my scenario:
We are looking to outsource our web hosting. Currently, we upload
client sensitive data to our SQL...
|
by: jersey |
last post by:
I am creating an instance of Excel in a WinForm application. When I try
to run this application, there is a long wait followed by a message from
my firewall that my application is attempting to connect to the internet.
Is there any way to stop automation instance of office from connecting to
the internet?
TIA, LJ
|
by: Dishaa V |
last post by:
Hello I need to connect to an access db which is on the internet. I do
know that URL of the same. its http://www.vallury.com/balance/bank.mdb.
Its just a test db.
How can I connect to that db from either my desktop application or from
my intranet website.
Thanks and Regards
|
by: bart van deun |
last post by:
Hi everybody,
Can someone tell me what are the possibilities for connecting Access to the
web? Something like thirt party software to do that?
Thank you,
Someone from Belgium - Europe
| |
by: chethana |
last post by:
I am using copmaq ipaq pocket pc 2002 h3600 series.
This device is synchronized with desk top pc running on windows
2000.
I want this pocket pc to be conncted to internet .Kindly help
Thanking you
Chethana
|
by: GTDriver |
last post by:
I'm trying to connect my application with a web service located on my own web
server(localhost).
I guess when the solution/proect is built it makes a file called 'Web
References\localhost\References.vb'
In this file a line of code reports the following error:
Line of code:
Dim results() As Object = Me.Invoke("GetCustomers", New...
|
by: Barry Wright |
last post by:
Hi All,
I have been connecting to this group through Rogers cable my internet
service provider. However, Rogers has announced that effective Dec 15th they
will no longer providing access to "usenet".
What is your preferred method of accessing this group?
Regards,
Barry Wright
|
by: nagmvs |
last post by:
Hai all,
I want to do a project that Connecting Internet to Intranet with all security.Can any ideas please ? .
My project description:
We have some clients those are transcript our data through internet.Daily we provide some data to those clients those r working in home.Suppose we send 5 files means they transcribed those files and send...
|
by: Federico Cozzi |
last post by:
Hello,
in my VB.net I would like to
1) start a new Internet Explorer process (not a new window of the
running process)
2) and connecting to its WebBrowser control, or InternetExplorerClass,
afterwards.
Basically, creating a new WebBrowser doesn't work because it opens a
new window of the running Internet Explorer, but if I start a new IE...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language...
| |
by: jinu1996 |
last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
|
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...
| |