Present site: http://www.risky-biz.com
First "sketch" of new design. http://www.risky-biz.com/new
I'm trying some new ideas, mostly just changing the stylesheet. It's
pretty rough so far. Some of the photos won't work on the "new" site,
but I doubt many of you will get that far in.
Thanks in advance
Greg 13  1928 
"Neal" <ne*****@spamrc n.com> wrote in message
news:op******** ******@news.rcn .com... On Sun, 4 Apr 2004 22:38:13 -0400, Jim Roberts <jr******@msn.c om> wrote:
Also, no character encoding labeling is specified. See
http://www.w3.org/International/tuto...-char-enc.html
I'm getting it as iso-8859-1...
It's his frame set page that doesn't have the character encloding label.
His other pages are set at the above but no doctype is specified.
Regards, Jim
On Mon, 05 Apr 2004 01:08:14 GMT, Greg G <gd*******@veri zon.net> wrote: Present site:
http://www.risky-biz.com
First "sketch" of new design.
http://www.risky-biz.com/new
I'm trying some new ideas, mostly just changing the stylesheet. It's
pretty rough so far. Some of the photos won't work on the "new" site,
but I doubt many of you will get that far in.
Thanks in advance
Greg
At short viewport sizes the side frame won't scroll. Even 800x600 is a
mess. I see what you're after, but it's a problematic design choice. At
that res, there's another problem with the logo and format choice links.
On Sun, 4 Apr 2004 22:48:23 -0400, Jim Roberts <jr******@msn.c om> wrote:
"Neal" <ne*****@spamrc n.com> wrote in message
news:op******** ******@news.rcn .com... On Sun, 4 Apr 2004 22:38:13 -0400, Jim Roberts <jr******@msn.c om> wrote:
> Also, no character encoding labeling is specified. See
> http://www.w3.org/International/tuto...-char-enc.html
I'm getting it as iso-8859-1...
It's his frame set page that doesn't have the character encloding label.
I'ts set at the server then. Try to validate the frameset page, it'll
detect the charset but fail due to no doctype.
"Neal" <ne*****@spamrc n.com> wrote...
I'ts set at the server then. Try to validate the frameset page, it'll
detect the charset but fail due to no doctype.
Ah, I see. cool. I tested his site with Firefox .8 @ 800x600. I didn't see
the problems you were having. I'll have to try it with IE.
I do like that he offers a no-frames version. I like the look too.
Regards,
Jim
In message <tb************ *************** *****@4ax.com>, Greg G
<gd*******@veri zon.net> writes Present site:
http://www.risky-biz.com
First "sketch" of new design.
http://www.risky-biz.com/new
I'm trying some new ideas, mostly just changing the stylesheet. It's
pretty rough so far. Some of the photos won't work on the "new" site,
but I doubt many of you will get that far in.
Thanks in advance
Greg
Looks good. Some people don't like having their scroll-bars coloured -
but I think it looks attractive.
Two minor things:
(a) The text is a little too small for me, so I increased the size of
the text. This, however, causes the height of the menu to increase with
the result that the text at the very bottom of the frame gets
overwritten: http://www.gododdin.demon.co.uk/ng/RB_1X.JPG (82k)
(b) If I run with images switched off (as some people with dial-up lines
assure me that they do), there are problems with the text at the top of
the page: http://www.gododdin.demon.co.uk/ng/RB_2X.JPG (78k)
Oh yes, one other thing:
The Show Schedule table would be better if you had some headings on the
columns for the benefit of anyone with sight (or other) problems looking
at it in talking browser. Column headings would help navigating the
Schedule.
regards.
--
Jake
On Mon, 5 Apr 2004 11:32:24 +0100, jake <ja**@gododdin. demon.co.uk>
wrote: In message <tb************ *************** *****@4ax.com>, Greg G
<gd*******@ver izon.net> writesPresent site:
http://www.risky-biz.com
First "sketch" of new design.
http://www.risky-biz.com/new
I'm trying some new ideas, mostly just changing the stylesheet. It's
pretty rough so far. Some of the photos won't work on the "new" site,
but I doubt many of you will get that far in.
Thanks in advance
Greg
Looks good. Some people don't like having their scroll-bars coloured -
but I think it looks attractive.
Thanks. I hope it doesn't offend too many people. One of my aims with
this "experiment " is to try some fancier things, but without
compromising usability.
Two minor things:
(a) The text is a little too small for me, so I increased the size of
the text. This, however, causes the height of the menu to increase with
the result that the text at the very bottom of the frame gets
overwritten:
http://www.gododdin.demon.co.uk/ng/RB_1X.JPG (82k)
First let me thank you for going the extra mile (do you still use
miles over there?) to help me out. I am aware that with a very large
font size and/or a small window the "coming soon" area will overlap
the other links. I'm hoping that people with those viewing conditions
will choose the No Frames option.
(b) If I run with images switched off (as some people with dial-up lines
assure me that they do), there are problems with the text at the top of
the page:
http://www.gododdin.demon.co.uk/ng/RB_2X.JPG (78k)
Thanks. I believe I have corrected that now.
Oh yes, one other thing:
The Show Schedule table would be better if you had some headings on the
columns for the benefit of anyone with sight (or other) problems looking
at it in talking browser. Column headings would help navigating the
Schedule.
I am not very familiar with how talking browsers work and I'm not sure
if any of the band's "fans" use them, but I am always interested in
better accesibility. I put in the headings.
Thanks again.
regards.
On Sun, 04 Apr 2004 22:51:41 -0400, Neal <ne*****@spamrc n.com> wrote: On Mon, 05 Apr 2004 01:08:14 GMT, Greg G <gd*******@veri zon.net> wrote:
Present site:
http://www.risky-biz.com
First "sketch" of new design.
http://www.risky-biz.com/new
I'm trying some new ideas, mostly just changing the stylesheet. It's
pretty rough so far. Some of the photos won't work on the "new" site,
but I doubt many of you will get that far in.
Thanks in advance
Greg
At short viewport sizes the side frame won't scroll. Even 800x600 is a
mess. I see what you're after, but it's a problematic design choice. At
that res, there's another problem with the logo and format choice links.
Thanks for the comments.
At 800 x 600 everything fits, as far as I can tell. At 640 x 480 the
logo doesn't fit and things are tight generally. Of course, you may be
using larger fonts.
That is the main reason I have included a no-frames option. Without
the nav frame even 640 x 480 seems OK to me. I believe it also takes
care of the "short viewport" condition. This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: Kjetil Torgrim Homme |
last post by:
often when re-factoring code, I need to change the indent level of
some chunk of code. due to the lack of an end marker, my Emacs has to
use heuristics when re-indenting, and this will occasionally lead to
mistakes. of course this is really _my_ fault, not Emacs', but it's
annoying all the same.
a colleague uses #fi, #yrt etc. to mark the end of blocks, but I don't
find this satisfactory since neither Python nor Emacs has any...
|
by: kazack |
last post by:
I posted a similiar question in this newsgroup already and got an answer
which I already knew but didn't get the answer I was looking for so I am
reposting the code and question differently in the hope that someone could
help me out. As said in an earlier post I am new to c++, this is alot
harder to do than VB. I am for the most part self taught with what I
already know and looking to learn more. The book I am using to teach myself
from...
|
by: Patchwork |
last post by:
Hi Everyone,
I have a design related question (in C++) that I am hoping someone can help
me with. It is related to my previous post but since it was pointed out that
I was more or less asking the wrong questions about the wrong 'topic'
(polymorphism) I have posted this new question. Please don't see this as a
spurious attempt to repost :-)
As mentioned previously, there is a very real problem I am trying to solve,
but I have reduced...
|
by: Roland Hall |
last post by:
If I wanted to write my own blog application, what functionality should it
contain?
TIA...
--
Roland Hall
/* This information is distributed in the hope that it will be useful, but
without any warranty; without even the implied warranty of merchantability
or fitness for a particular purpose. */
|
by: Ash |
last post by:
Hello all,
I am hoping this is the appropriate newsgroup for a C++ interface
design question. I am trying to design an interface for a subscriber
to register/deregister handlers for various events. The callbacks
specified by the subscriber will be called when the events get
trigerred in a different thread. Each event has different kinds of
data associated with it. To achieve this I have the following:
// The following describes the...
| | |
by: Sunny |
last post by:
Hi All,
I have a serious issue regarding classes scope and
visibility. In my application, i have a class
name "TextFile", and also a few other classes
like "TotalWords", "TotalLines" and etc.., which are
suppose to describe the structure of my main TextFile
class. Also i have created some custom collection classes,
which only take items of the types, they are designed for.
Now the problem is that I want my element classes,
like...
|
by: |
last post by:
Hi. This is a a semi-newbie question about how to store arbitrary
information about my apps
such that I can code quickly, mimizing complexity and the number of things I
have to hold in my brain. I am going to describe the scheme I'm using, and
then
I'm going to describe another scheme that may be more OO but that I have not
tried.
I'm hoping someone vastly smarter and more experienced than me will critique
this
and/or tell me a yet...
|
by: Phlip |
last post by:
1230987za wrote:
Kanze is a classically-trained "unit tester". In some circles "unit" is a QA
concept - specifically, if a test fails, you only need to inspect one unit.
So "units" are "things which are clearly delimited and accessible to
inspection". That should map onto C++ classes - specifically due to
overlapping requirements. C++ classes _should_ be "things which are clearly
delimited and accessible to inspection". Yet...
|
by: Ken Fine |
last post by:
I've been living with a frustrating issue with VS.NET for some months now
and I need to figure out what the problem is. Hopefully someone has run into
the same issue and can suggest a fix. I suspect some permissions problem.
I'm running VS.NET 2008 in Vista. Symptoms and observations:
* ASP.NET's native ImageMap and Image controls work just fine and provide a
design-time preview of images that are referenced via the ImageUrl property
*...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Oralloy |
last post by:
Hello folks,
I am unable to find appropriate documentation on the type promotion of bit-fields when using the generalised comparison operator "<=>".
The problem is that using the GNU compilers, it seems that the internal comparison operator "<=>" tries to promote arguments from unsigned to signed.
This is as boiled down as I can make it.
Here is my compilation command:
g++-12 -std=c++20 -Wnarrowing bit_field.cpp
Here is the code in...
|
by: tracyyun |
last post by:
Dear forum friends,
With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the choice of these technologies. I'm particularly interested in Zigbee because I've heard it does some...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: muto222 |
last post by:
How can i add a mobile payment intergratation into php mysql website.
| |
