473,587 Members | 2,487 Online
Bytes | Software Development & Data Engineering Community
+ Post

Home Posts Topics Members FAQ

Uploading with FTP (software) query

Using FileZilla V2 to upload to one server suddenly had the directory not
display. Two other different servers continue to display the directory
contents. Last used on July 22/08 in a successful state. Tues. Aug.20 no
directory.
Upgrading to FileZilla V3.1 produced the same result.

The error record doesn't remain consistent.
Initially the log record displayed: 'socket operation was attempting to
reach an unreachable host'. Now the test LIST displays and the log record
says: Cannot display directory. V3 times out immediately. The wizard in V3
that tests the configuration reports that it is either Firewall or Router.
Shutting off the Windows Firewall isn't the solution.
At the Linksy forum ( my router is a Wireless-G broadband used in a wired
set-up WRT54GS v7) I just downloaded the version update but haven't
installed. The passive routine has worked for some considerable time.

I see lots of references to this condition but not a distinct routine for
repair. I phoned the specific server support and the technician didn't have
a ready answer and had no knowledge of anything having changed at their end.
He asked me to change the configuration to active rather than passive but
that didn't resolve the condition.

At the Linksy forum ( my router is a Wireless-G broadband used in a wired
set-up WRT54GS v7) I just downloaded the version update but haven't
installed. The passive routine has worked for some considerable time.

An alternate FTP software was downloaded to another computer but the same
thing- Nexicom.net server no directory while gogax.com and webng.com will
display.

I wondered if anyone here has had this situation arise and what references
can be used to get possible solutions. I've run out of search terms.

Rose
--

http://rwgallery.gogax.com/index.html
Aug 21 '08 #1
2 1546
Gazing into my crystal ball I observed "RoseW" <wd**@nshuronte l.on.ca>
writing in news:g8******** **@registered.m otzarella.org:
An alternate FTP software was downloaded to another computer but the
same thing- Nexicom.net server no directory while gogax.com and
webng.com will display.

I wondered if anyone here has had this situation arise and what
references can be used to get possible solutions. I've run out of
search terms.
I had a similar situation a while ago. I was able to list files on
every server except the one provider. I opened up a command window, and
tried to FTP from the command line. When it was unsuccessful, I copied
the output to a plain text file, and sent that, with the log from
Filezilla to the provider. They were stumped for about three hours, and
finally told me to use Active Transfer.

If you can get to other providers without any problem, it is probably
that one provider's server that is giving you headaches. I doubt it has
anything to do with FTP software or firewall settings.

--
Adrienne Boswell at Home
Arbpen Web Site Design Services
http://www.cavalcade-of-coding.info
Please respond to the group so others can share

Aug 21 '08 #2
Adrienne Boswell wrote:
| Gazing into my crystal ball I observed "RoseW" <wd**@nshuronte l.on.ca>
| writing in news:g8******** **@registered.m otzarella.org:
|
|| An alternate FTP software was downloaded to another computer but the
|| same thing- Nexicom.net server no directory while gogax.com and
|| webng.com will display.
||
|| I wondered if anyone here has had this situation arise and what
|| references can be used to get possible solutions. I've run out of
|| search terms.
||
|
| I had a similar situation a while ago. I was able to list files on
| every server except the one provider. I opened up a command window, and
| tried to FTP from the command line. When it was unsuccessful, I copied
| the output to a plain text file, and sent that, with the log from
| Filezilla to the provider. They were stumped for about three hours, and
| finally told me to use Active Transfer.
|
| If you can get to other providers without any problem, it is probably
| that one provider's server that is giving you headaches. I doubt it has
| anything to do with FTP software or firewall settings.

Thanks for your response.
I was hesitant to make major changes to the router configuration when my
most used servers can be connected to with no problems.
I look after a web site for a friend who is 6 or 7 hours drive east of me.
They have a domain for their summer cottage business so e-mailing a file to
be uploaded surely doesn't add much help when its their busy time.
The work around I did today was use the built in File Management system that
the server has built into the set-up for a domain. Its one file upload at a
time but it got the update done.
The help technician did say he would look into it but that could be wishful
thinking for me to totally believe that <grin>

I'll check out the fine details for Active transfer to see if there is some
small thing I left out while doing the configuration in FileZilla V3 since I
don't pass their wizard configuration test to this particular server.

Thanks again.
Rose
--

http://rwgallery.gogax.com/index.html
Aug 21 '08 #3

This thread has been closed and replies have been disabled. Please start a new discussion.

Similar topics

0
1364
by: pere | last post by:
hi everybody, I have a script that inserts .csv data into a table; I want different users to insert their data in the same table. To differenciate them I make them fill a name (called "nom") field in the html before uploading the .csv. But when another user uploads data, the previous one disappears! I just use a INSERT INTO values, so it...
221
367284
Atli
by: Atli | last post by:
You may be wondering why you would want to put your files “into” the database, rather than just onto the file-system. Well, most of the time, you wouldn’t. In situations where your PHP application needs to store entire files, the preferred method is to save the file onto the server’s file-system, and store the physical location of the file in...
11
2268
by: starter08 | last post by:
Hi, I have a C++ function which sends a post request to a server for uploading a file. I have also written a server side cgi to receive the data and create the file in a specified directory. The server side cgi creates a file, however it is blank, I don't see any errors in the log files (apache2/error.log) Below is my server side script ...
0
7920
marktang
by: marktang | last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main...
0
8347
jinu1996
by: jinu1996 | last post by:
In today's digital age, having a compelling online presence is paramount for businesses aiming to thrive in a competitive landscape. At the heart of this digital strategy lies an intricately woven tapestry of website design and digital marketing. It's not merely about having a website; it's about crafting an immersive digital experience that...
0
8220
tracyyun
by: tracyyun | last post by:
Dear forum friends, With the development of smart home technology, a variety of wireless communication protocols have appeared on the market, such as Zigbee, Z-Wave, Wi-Fi, Bluetooth, etc. Each protocol has its own unique characteristics and advantages, but as a user who is planning to build a smart home system, I am a bit confused by the...
0
6626
agi2029
by: agi2029 | last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then...
1
5718
isladogs
by: isladogs | last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM). In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules. He will explain when you may want to use classes...
0
5394
by: conductexam | last post by:
I have .net C# application in which I am extracting data from word file and save it in database particularly. To store word all data as it is I am converting the whole word file firstly in HTML and then checking html paragraph one by one. At the time of converting from word file to html my equations which are in the word document file was convert...
0
3844
by: TSSRALBI | last post by:
Hello I'm a network technician in training and I need your help. I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs. The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols. I succeeded, with both firewalls in...
1
2358
by: 6302768590 | last post by:
Hai team i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
0
1189
bsmnconsultancy
by: bsmnconsultancy | last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating...

By using Bytes.com and it's services, you agree to our Privacy Policy and Terms of Use.

To disable or enable advertisements and analytics tracking please visit the manage ads & tracking page.