Hi,
On Vista 64-bit, I am in the administrators' group + DB2ADMNS.
FP2 was applied on FP1 and went fine, except that I got a message that
DB2COPY1 cannot be updated (right access denied ???). I don't get it. After
that, I cancelled, and setup was successful.
I have also tried to set the already default copy as default copy
(Start->programs ... -Set-up tools -Default DB2 ....) and get the same
error.
Any tricky thing to do on Vista to solve this pb ?
Thanks,
Jean-Marc
3  1663 
If you can, replace Vista with XP. I did an installation routine for
DB2 9.1 last year and it gave me all kinds of headaches. The reason
for this is that you usually work as a "reduced" administrator and
can't change your own files you installed just a minute ago.
However, you can run programs explicitly as full administrator; for
instance, by right clicking on the icon, or by pressing shift+return
while entering the command in the start menu. (I dumped Vista after I
finished writing the routine, so I'm not sure about the details now.)
Hi,
Thanks for your help and explanation.
Vista is really a mess, I fully agree, and I deactivated user control to
avoid clicking all the time on actions. But as far as I remember, I did not
get the issue with FP1, but I may have installed directly from FP1 code.I
can't unfortunately come back to XP 64 bit :-(.
Thanks again,
JM
<w.*********@go oglemail.comwro te in message
news:e6******** *************** ***********@m73 g2000hsh.google groups.com...
If you can, replace Vista with XP. I did an installation routine for
DB2 9.1 last year and it gave me all kinds of headaches. The reason
for this is that you usually work as a "reduced" administrator and
can't change your own files you installed just a minute ago.
However, you can run programs explicitly as full administrator; for
instance, by right clicking on the icon, or by pressing shift+return
while entering the command in the start menu. (I dumped Vista after I
finished writing the routine, so I'm not sure about the details now.)
As far as I remember my install routine was for FP2. So maybe it will
help if you remove FP1 first, then install FP2.
This thread has been closed and replies have been disabled. Please start a new discussion. Similar topics | |
by: JL |
last post by:
Hello,
I've a strange problem with Windows Vista, running an ASP page on local
machine (http://localhost/test.asp), the page does not give me any error but
the asp code is not executed (simple code : <% response.write("hello") %),
it show me a blank page, I think I've put all the setttings correctly, but
maybe I must do something obvious to fix that.
Anyone can help me ??
|
by: Viviana Vc |
last post by:
Hi all,
I've read the WindowsVistaUACDevReqs.doc documentation and I have done
different small tests on Vista to understand the bahaviour and now I
have a few questions.
1) If I create a dummy console application that creates a file in
Program Files directory, this one will succeed and will create the file
b/c of the virtualization.
But, if I do the following call in a console window (a.exe contains just
|
by: Mark Rae |
last post by:
Hi,
Now that the VS.NET 2005 SP1 update patch is with us, I'm in the process of
moving my main development environment onto 64-bit Vista Business Edition -
so far, so good...
However, there is a bit of a gotcha with Request.UserHostAddress...
Under IIS6 and earlier, that would return a standard xxx.xxx.xxx.xxx IP
address. However, Vista enables IP6 by default, which makes
|
by: boriq |
last post by:
Hi,
I'm trying to compile sip 4.6 on windows vista.
I have Python 2.5 installed in c:\Python25.
I have Qt 4.3.0 installed in c:\Qt\4.3.0 together with MinGW in c:
\MinGW.
I have environment variable PATH set to c:\Qt\4.3.0\bin;c:\MinGW\bin
And here is what I did:
C:\sip-4.6>configure.py -p win32-g++
This is SIP 4.6 for Python 2.5 on win32.
|
by: =?Utf-8?B?bXVzb3NkZXY=?= |
last post by:
Hi,
I wonder if someone could shed some light on this one for me.
I have developed a web app in VS2005 with the built in server. It uses an
sql database, everytihng works.
I need to test it across the network, so i've installed IIS7 on my Vista
machine and created a new website, point at the website's directory. After I
switched to the 'Classic .net' app pool, it shows up on the port.
| | |
by: Claudio M. E. Bastos Iorio |
last post by:
Hi, anyone using VS2008 (final) on windows Vista?
I have a problem. The ASP.NET web site administration tool on any site
created by VS2008, running on Vista, is not working as it should. I
can configure users, roles, but when I try the option 'Select a single
provider for all site management data' AspNetSqlProvider test, I
receive the message:
'Could not establish a connection to the database.
If you have not yet created the SQL Server...
|
by: =?Utf-8?B?QXNhZg==?= |
last post by:
Hello,
I have just installed VISTA Enterprise and VS.NET 2008.
When pressing F5 to debug my test ASP.NET website, IE 7 display the message
"Internet Explorer cannot display the webpage".
The local URL that VS.NET 2008 generates is
http://localhost:49705/aaa/Default.aspx.
In IIS7 Manager, ASP.NET V2.0… is "Allowed" in the ISAPI and CGI Restrictions.
Also IIS7 is working and display ASP.NET web sites if I convert them to IIS7...
|
by: =?Utf-8?B?dmlwZXJ4MTk2Nw==?= |
last post by:
We are having an issue with an application we are developing. We have a
Legacy COM DLL in C++ that we have converted to Visual Studio 2008. This COM
DLL has methods that are calling Managed C# assemblies as pass thru to
support legacy applications in an effort to move our code to the new Code
base. Our COM Object can be instantiated on Windows XP in any COM supported
environment using Visual C++, Visual Basic, ASP.NET or ASP and works...
|
by: josequinonesii |
last post by:
I've searched, I've read, I've tested and re-read numerous post but to no avail yet...
Quite simply, the settings I've applied to my httpd.conf, httpd-vhost.conf and my hosts files simply does not work. Please review my work and let me know if you see that one little thing that is throwing me for a loop.
HTTPD.CONF
#
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the...
|
by: marktang |
last post by:
ONU (Optical Network Unit) is one of the key components for providing high-speed Internet services. Its primary function is to act as an endpoint device located at the user's premises. However, people are often confused as to whether an ONU can Work As a Router. In this blog post, we’ll explore What is ONU, What Is Router, ONU & Router’s main usage, and What is the difference between ONU and Router. Let’s take a closer look !
Part I. Meaning of...
|
by: Hystou |
last post by:
Most computers default to English, but sometimes we require a different language, especially when relocating. Forgot to request a specific language before your computer shipped? No problem! You can effortlessly switch the default language on Windows 10 without reinstalling. I'll walk you through it.
First, let's disable language synchronization. With a Microsoft account, language settings sync across devices. To prevent any complications,...
| | |
by: Hystou |
last post by:
Overview:
Windows 11 and 10 have less user interface control over operating system update behaviour than previous versions of Windows. In Windows 11 and 10, there is no way to turn off the Windows Update option using the Control Panel or Settings app; it automatically checks for updates and installs any it finds, whether you like it or not. For most users, this new feature is actually very convenient. If you want to control the update process,...
|
by: agi2029 |
last post by:
Let's talk about the concept of autonomous AI software engineers and no-code agents. These AIs are designed to manage the entire lifecycle of a software development project—planning, coding, testing, and deployment—without human intervention. Imagine an AI that can take a project description, break it down, write the code, debug it, and then launch it, all on its own....
Now, this would greatly impact the work of software developers. The idea...
|
by: isladogs |
last post by:
The next Access Europe User Group meeting will be on Wednesday 1 May 2024 starting at 18:00 UK time (6PM UTC+1) and finishing by 19:30 (7.30PM).
In this session, we are pleased to welcome a new presenter, Adolph Dupré who will be discussing some powerful techniques for using class modules.
He will explain when you may want to use classes instead of User Defined Types (UDT). For example, to manage the data in unbound forms.
Adolph will...
|
by: TSSRALBI |
last post by:
Hello
I'm a network technician in training and I need your help.
I am currently learning how to create and manage the different types of VPNs and I have a question about LAN-to-LAN VPNs.
The last exercise I practiced was to create a LAN-to-LAN VPN between two Pfsense firewalls, by using IPSEC protocols.
I succeeded, with both firewalls in the same network. But I'm wondering if it's possible to do the same thing, with 2 Pfsense firewalls...
|
by: adsilva |
last post by:
A Windows Forms form does not have the event Unload, like VB6. What one acts like?
|
by: 6302768590 |
last post by:
Hai team
i want code for transfer the data from one system to another through IP address by using C# our system has to for every 5mins then we have to update the data what the data is updated we have to send another system
| | |
by: bsmnconsultancy |
last post by:
In today's digital era, a well-designed website is crucial for businesses looking to succeed. Whether you're a small business owner or a large corporation in Toronto, having a strong online presence can significantly impact your brand's success. BSMN Consultancy, a leader in Website Development in Toronto offers valuable insights into creating effective websites that not only look great but also perform exceptionally well. In this comprehensive...
| |
